T520 display tweaking

Similar Questions

• T520 display blanks and blinks when plug/unplug the power

  the subject says it all.

  brand new t520 with optimus (nvidia + intel) display adapter, display of 1920 x 1080.

  whenever I have more in or unplug the power, the white for about 2 seconds, then flashes back on.

  the problem occurs if the bios setting is integrated, discreet, or optimus and th problem occurs even if the display settings are the same in the profile of AC and battery power.

  is this normal? It's very BAD.

  Thanks in advance.

  George

  Looks like he made the 50 Hz / 60 Hz switch...

• T520 display output

  We are currently looking for a new laptop of demonstration and T520 W520 appearance being contenders. OK, they are not as mobile as some, but is not the main factor for us. Our main considerations are the performance and output screen.

  We need a machine that is capable of producing up to SXGA (1280 x 1024), which mainly limited us to high-end displays. Could someone confirm if this setting is available on the T520/W520 1920 x 1080?

  Thanks in advance

  It would appear that external resolution. It would be always stretched on the side of the laptop unless you tell it is no stretch to fit the Panel.

• Problems finding my display drivers correct t520 (4246).

  Will have questions find my correct t520 display drivers (4246)... The best I found was Intel graphics 3000... It doesn't have a nvidia card

  Note from Moderator: Edition subject to the content of the game.

  Even the discrete gpu is not all that good for games so if game is your major interest I would advice allowing you to see the series w t series is significantly lower. But if the game is not intensive graphiically like the witcher 2, it will be fine, in other words hardcore games is a no no.

• T520/W520 external display issues

  Hello community,

  We have problems connecting to an external monitor via the Port replicator. In the BIOs, it is not possible to select the numeric value of 1 or 2. During boot no picture appears on the external display.

  It is very annoying because we want to use Pre-startup-authentication.

  problem is solved. We must choose the first dedicated graphics processor and disable recognization OPTIMUS OS

• Designjet T520: Designjet T520 24 in. don't size printing

  Hello

  I try DJ T520 of my office to print a size D ANSI drawing. We bought this one a few months ago and it works fine, but I found an option that we had in our old office in isn't there anymore. I used to be able to rotate the print 90 degrees manually in the print settings. Because we have 24 in the version of the printer, I need to print the drawing in the portrait which means he needs to rotate 90 degrees, so it can adapt. Is there a way of setting this? Is this just a problem of drivers? I worked with our company this GUY to try to understand this. Thank you!

  Please see the section "Use paper economically" to the following HP web link to use the desired job rotation option:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03559791

  I hope this helps!

• Light client T520: t520 - how to disable the 'hp' splash screen at boot...

  Hello

  We just bought some HP t520s to complete a lab that we t510s.  The t510s work very well.  The t520s are almost here.  I just need to hide a pesky startup screen.  When the t520 marketing and gets to the GUI, but before that the network is connected, it displays a splash screen telling me that his "waitting for the network.  Unfortunately, this splash screen also has a button called "network settings."  This button, this bad boy is what I want to disable delete or hide.  I don't care if the start screen appears or not, but in giving users access to network settings and host name and all sorts of settings is a waitting accident to happen.

  Does anyone have any ideas as to how I can get rid of this button?  I would really appreciate hints, ideas, comments or words of wisdom on this topic.

  Thanks to you all!

  René

  Try the following: in xterm type regeditor, go to config-Assistant, enablenetworkcheck the value 0, enableupdatecheck the value 0, the network/update dialog box will not be displayed. You must type the value in the value dialog box and click on save before you go to the following registry key. If this does not work as expected please open a case with www.hp.com/go/support

• Designjet T520: Designjet T520: failure of the printer

  Had Designjet T520 about 18 months. Use it only for printing large format on roll paper. Error message: the printer failed. "There is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. »

  Have made the procedure "on - off" several times including disconnect, allowing the printer to sit idle and then plug it in, turn on and still the same problem. I also removed and checked each ink cartridge and cannot detect all problems.

  Remove all the ink cartridges and turn on the plotter.  When he asks the ink, put them in one at a time and see if the error is displayed when only one of the ink cartridges installed.

• T520: Unable to support more than 2 screens? (via the docking station)

  All,

  I have a problem, allowing more of 2 monitors. My T520 is connected to a docking station that has two outputs digital video that are connected to two monitors NEC.

  For some reason any when I go on Windows | Display settings | It does not allow me to activate all three display at the same time. Can I have one) two monitors on the computer screen or b) + 1 monitor.

  Whenever I tried to connect to the 3 screen, it automatically shuts the screen 2.

  Other colleagues with T420 not experience this problem. The T520 & T420 uses the same docking station so I don't think that is the question.

  My first thought is to update the video driver that I did but still does not. The T420 has a nVidia card while T520 has an Intel processor on board one.

  If anyone has any suggestions that would be great.

  Thank you

  T520 with Nvidia Optimus can support up to 4 screens, while as the T520 with intel only the graphics card can support only 2 screens.

  If you need more screen support on the T520 of yours, you may consider usb2dvi, eGPU, Vidock.

• Triple monitors with Thinkpad Mini Dock Plus Series 3 T520

  Hello

  I have Lenovo T520 with home Mini Dock Plus Series 3 station.

  I would like to connect three monitors, that is, two dviports and thirdly, one is the T520 monitor.

  I updated my video driver for Interl (R) Graphics 3000 Driver.

  When I try to run the NVIDIA Graphicdriver, I got a message error "the graphics driver is not compatible with the graphics hardware. I tried to find a solution on Lenovo forum

  http://forums.Lenovo.com/T5/options-Accessories/mini-dock-plus-series-3-with-triple-monitors/TD-p/57...

  It says that I need to enable Optimus in the system.

  I can't understand what he found where I can activate Optimus?

  You guys have any suggestions as to how I can put it up using two DVI ports instead of use the vga?

  Kind regards

  Thank you all guys.

  While constantly looking for a solution to extend the number of monitor. I managed to find a solution. Today, I had "I - TEC USB 2.0 graphics video card" and he connected with one of the USB port. It works very well and I am also pleased with the video quality. I can separately used the third monitor. It is also possible to share the display between the second and the third screen.

  Concerning

• T520 - Connecting to a Plasma TV

  I want to display my computer on a Panasonic Viera TC-P50ST30. I wonder what cable I need to achieve this.

  My computer has a "monitor" on the side connector that looks like a regular monitor connector that laptops have had forever.

  It also has a connection calls a «display port connector» user manual I don't know what it is.

  Regarding the TV - I enclose you screenshot of its manual.

  Should what kind of cable I ask the store to be able to connect my computer to the TV?

  Thank you!

  

  DisplayPort-HDMI cable to get the best possible connection. You plug a DisplayPort cable DisplayPort on your T520 side (it is located on the left side) and the side HDMI cable to your TV (marked as surrounded next to 'Best' in your PDF file). Cable costs US $8 to $11 shipped on eBay or Amazon. Video and audio signal is transmitted to your TV in this way.

• T520 and T530 FHD screen quality

  Hello

  I'm about to buy my next thinkpad - probably T530. What I need is the Full HD display - until yesterday, I was sure it's ISP (I don't know why, I just assumed that, despite a lot of reading comments) but it's not. I do not have a TN screen for a long time - even my old T60 had display PSI, and now I'm afraid of him. I can't find anywhere a good comparison between the screens (such as full HD vs HD + or standard IPS display). I know this is not bad, I have more fear of viewing angles - and my 2nd problem is nowhere in my area I can check it out before buy you...

  Is the same screen FHD in new T530 she was in T520? Or did do it better?

  Could you share some photos or video of the angles of vision on your thinkpad FullHD? I would really appreciate it.

  Thank you

  I think it would be the same, unless AUO made a few revisions.

  The FHD W520 is significantly better than the X 220 TN as shown in this video. Personally, I think the horizontal view angles are more than 150 degrees, which is where it really counts. Vertically, there are way more wiggle room than there is on the TN 220 X and it is not reverse until out a normal viewing angle.

  I think that the reason that they do not offer it's maybe due to the consumption energy, or the unavailability of the high end panels in this form factor.

• "Then to initialize at the root folders to display"

  I use my laptop at home (where I connect to my network, my media player drive and my DVR), at work (where I connect to 2 network drives) and a free desktop environment (sometimes connecting to a network drive). All of these drives have specific IP addresses, passwords and the loginnames.

  Often, I get the message "initialization of root folders to display. I read that the easiest way to prevent this from happening is to disconnect the networkdrives. But next time, opening session, I have to fill the IP addresses, the loginnames and passwords. Disconnection makes it not easy for me, it makes it much more difficult.
  Is there a parameter, a tweak, a workaround or something else to tell Windows that he shouldn't check all readers of registry?

  http://www.windowsbbs.com/Windows-XP/88129-initializing-root-folder-display.html

  3 solutions in above thread, we worked for the op :)

  http://www.google.com/#output=search&sclient=psy-ab&q=Initializing+to+Root+Folders+to+Display%2C+in+xp&oq=Initializing+to+Root+Folders+to+Display%2C+in+xp&gs_l=hp.3..0i22i30l2.3141.10328.0.11360.8.8.0.0.0.0.297.1875.2-8.8.0...0.0...1c.1.16.psy-ab.X2b4YU-8FYE&pbx=1&bav=on.2,or.r_qf.&bvm=bv.47534661,d.dmg&fp=e20a34a9644e4d30&biw=1024&bih=559

  a lot of success here and read

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Firewall problem: "due to an unidentified problem windows cannot display windows firewall settings.

  I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian