T530 - 2 external monitors via VGA Splitter

Similar Questions

• MacBook pro at 1920px external monitor via hdmi?

  I just got MacBook pro 13-inch retina and the default resolution is 1280px in width, and the maximum value is 1600px.

  If I connect the laptop to an external monitor via HMDI 1920px resolution, the resolution will actually be 1920, max mobile as 1600?

  You can set the external display to the monitor native resolution or HDMI resolution according to your preference.

  Don't use mirror display on external monitor because when you mirror on the screen display resolution is also in reverse. Use extended display mode.

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• Connect external monitor via the VGA port > > BSOD

  Hi all

  I have a laptop Acer Aspire V3-772 and I had an (obvious) problem. When I connect an externel to my VGA port my laptop freezes. After that I restarted my laptop (still connected to the monitor via the VGA input) I get the following BSOD:

  video_tdr_failure igdkmd64.sys

  This error I've read on the internet has nothing to do with the video card intel. On this laptop, there intel 4600 internal videocard. There is also a second video card which is geforce gtx 760 m.

  I updated my system completely and everything works fine. Except the VGA port.

  I tested my HDMI port that works correctly, open the same screen/monitor connected via the VGA input it freezes / BSOD.

  One give me advice on what could be the cause?

  is this hardware or software really? I think that the software. In any case I'll try to install the older version of the video card driver intel. I'll post if it works.

  I would like to have some advice on this issue.

  Thank you!

  Thanks for your reply. I tried already. HDMI works very well but even VGA displayport monitor (so double male vga cable) causes system hang still > BSOD.

  I did a factory reset. Same result.

  Conclusion... Its a hardware problem.
  I'll contact support so they can pick up my laptop for repair.
  I lost my weekend for this problem.

  I'll change this topic as resolved since it's associated mobo (intel grappics card).

• Equium L300 - 17Q does not appear on my external TV via VGA

  Computer details:
  NTEL (R) 965 Express Chipset Family graphics card

  Windows Vista Edition Home Premium

  Recently, I connected my laptop to my HDTV UMC of 22 "via a VGA cable. It worked fine for about a month, until the day my TV says 'no signal' when I tried to connect to the laptop. Now, I tried the last month trying to solve this problem and have had no luck.

  I tried unistalling and reinstalling the display driver, changing the resolution, tinkered with each parameter but without success.
  My laptop recognizes that there is an attached monitor and when I press FN + F5 and scroll through the different options of the computer knows that the monitor is there, but the style of TV says 'no signal '.

  I know this isn't the TV which is faulty, I connected laptop computer Sony my father on my TV via VGA, and the TV display Sony laptop screen.

  PC World wanted me £40 just to "have a look" load which I of course said no because this can be something simple to solve.
  I could be wrong, but I hope someone has a solution for me.

  I'm not a massive wizz with computers, but I have a knowledge base.
  If you have any other questions, you need to know then I'll respond and keep checking for anyone who responded.

  Thank you very much.

  timSR3

  Hello

  For me, it would be interesting to know if you have tested this laptop output VGA on different TVs?

  PS: Have you checked the BIOS settings?
  There is a tab called display. Please change the settings and check if you can activate the display (signal) on external LCD.

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Max Resolution for external monitor via HDMI on Lenovo Y700?

  Hello

  I hope that someone has experience with external monitors on a computer laptop y700.

  I would like to ask if my laptop Y700 supports resolutions higher than 1920 x 1080 for external displays via HDMI.

  My model is:

  https://www.Amazon.de/Lenovo-i5-6300HQ-quad-core-Prozessor-Betriebssystem/DP/B016QB9HZK/ref=sr_1_2?i...

  I want to use a monitor with a resolution of: 2560 x 1080

  https://www.Amazon.de/DP/B00TF0X37I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&ColId=31RP1ZDSM66ZA&colii...

  Is this possible with my laptop. And it is even possible to connect a 4K screen?

  Thanks in advance for your help.

  So finally, I tried to connect my laptop to a 2560 x 1080 widescreen-resolution-display via HDMI in an electronics store:

  THIS MARKET! It is not a problem to run it with 2560 x 1080 at 60 Hz. The only problem might be a 4K resolution screen that it only works with 30 Hz, because it's an HDMI 1.4 port.

• laptop connected to an external monitor with vga cable issues?

  1The votefavorite

  I use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable. I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes. When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off. I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc. I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA. I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem. Does anyone know where a response? It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.

  (1) right click on your power Option icon on the taskbar

  (2) will take you to Options below

  Control Panel:

  Choose what closing the lid"this choice is the 3rd in your list of choices

  The next screen will allow you to configure your choice:

  When I close the lid:

  On battery: do nothing and

  Plugged in: Do nothing

  This will prevent your system/video to go to sleep or stopping

  Hope this helps

• Cannot display the HD-DVD on an external monitor via the vga input

  Help, please

  I have updated me factor embedded hd-dvd player, I've also updated the audio driver realtek for vist but for the life of me I can't get a hd dvd to play on my projector via a vga cable.

  Any suggestions would be most kind
  Thank you
  Pat

  What model of laptop do you have?
  Has your computer laptop HDMI port?

  VGA port is not one that suits what you want to do.

• Qosmio x 70-A-12-question on the use of the external monitor

  Hello

  am about to buy an external monitor and I was wondering what would work with my laptop.
  I want to it works like an additional surface (not a copy of my current screen) with both screens at the same time working.

  My laptop seems to have a VGA port and an HDMI port.
  I've already tried via the HDMI port with an old - probablybroken-monitor, but that has not worked.
  I don't know if this is due to the screen or my laptop.

  I also tried to search for VGA monitors, but when I checked the specs for my laptop, it does not list it could connect a monitor via VGA...

  Anyone know what would be really work?...
  Thanks in advance!

  As you have already said: the laptop supports the VGA monitor (RGB) as well as the output port HDMI output port.
  So, you can use one of the ports to connect the external monitor.

  Today, the HDMI port is a standard interface that is supported by almost all external monitors and I recommend to use the HDMI connection. HDMI supports digital signals and provides the best image quality.

  So it s your choice now to choose a good external monitor work.

• External monitor of higher resolution for Envy 17 t w/GeForce GT 740 M?

  I have an envy TouchSmart 17 t-j100 Quad edition with a Nvidia GeForce GT 740 M graphics card. It has only a HDMI port, no DisplayPort, DVI, VGA port no port.

  I bought a HP ZR2740w 27 "monitor, but apparently the desire cannot drive a very high resolution (2560 x 1440) monitor via HDMI port.

  What is the display max resolution that want support for an external monitor via its HDMI port?
  I looked for it in the product specification, but do not see it.

  Thank you...

  Whatever the graphic subsystem as UMA, 740M, 750M, or 840 M. It HDMI v1.4 output supports up to resolution of 1920 × 1080 @ 60 Hz.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• T43 w / Port Rep II - double configuration external monitor

  Hello

  I have a T43 with ATI chipset.  I'm running it in a configuration with dual monitor with the laptop LCD and an external monitor connected to the docking station.  I would use 2 external monitors via the docking station DVI and VGA connectors, but I can not understand how to get the system to pass the laptop LCD with DVI.  Is this possible?  If so, how?

  I am running XP.

  Many thanks for any help!

  Fred

  go into your bios, select vga + dvi + internal display.

• Resolution of the external monitor max Intel HD Graphics 3000

  Hello

  Inspiron N5050

  Intel HD Graphics 3000

  I'll be able to drive an external monitor via HDMI to a Full HD 1080 p, 1920 x 1080 resolution?

  Hi metalstardust,

  Yes, he'll support it.

  The display resolution maximum of DisplayPort 2560 x 1600, HDMI and VGA.

  Answer please if you have any other questions.