T530 Windows 8, cannot turn Adaptive dimming off

I went thorugh these forums, but it seems that none of the solutions work on my T530 about try to disable adaptive dimming off the coast. I defined the characteristics of graphics power Intel to the 'sector' and the 'Maximum Performance' settings, then I also disabled the Adaptive gradation in Windows 8 settings (made even a new profile where I put on the maximum brightness in the settings and turned off at the gradation Adaptive.) power. Nothing helps. Whenever I pass a program with the darker background, for example Spotify, the occultation happens, switch back and it will brighten up the screen. It's makes me completely crazy.

Is it maybe a problem with the drivers of Windows 8? Any ideas what to try next?

Never mind. It seemed that the new parameters of entry into force until after a reboot.

Tags: ThinkPad Notebooks

Similar Questions

  • What windows features are turned on or off?

    What features windows should be on or off?

    Hi Apixie,

    In earlier versions of Windows, to turn a feature off you had to uninstall it completely from your computer. In this version of Windows, the features remain stored on your hard drive, so you can turn them back if you want. Turn off a feature does not uninstall the feature, and it does not reduce the amount of disk space used by Windows features.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

    Hope this has been helpful.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

    I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

    I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

    He continues to do in cycles?

    Help

    JOhn

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358

    You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
    These removable media can cause this problem during the restart of Windows.

    or

    System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

  • Windows 7 turns adapter wireless off when ethernet is plugged.

    I am running windows 7 on my laptop, and whenever I plug an ethernet cable into it automatically turns off my wireless adapter. I want to use networks wired and wireless at the same time but cannot find a setting to stop windows to do this. Any ideas?

    I am running windows 7 on my laptop, and whenever I plug an ethernet cable into it automatically turns off my wireless adapter. I want to use networks wired and wireless at the same time but cannot find a setting to stop windows to do this. Any ideas?

    You have a laptop HP or Compaq? If so, check your BIOS settings. Some portable HP/Compaq have a setting in the BIOS for LAN/WAN switching. It's the Wireless Assistant HP support on my HP laptop.

    http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/LAN%5E_WLAN-switching.PNG

    MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

  • Feedback: Dynamic Pen in Windows 7, cannot turn off

    All right, thank you microsoft for windows 7, it's fantastic, I love it and intend to purchase, but for now, I'm having an annoying problem on the RC.
    I have a wacom tablet, there were a few driver problems at the beginning but I got all hammered, works perfectly the way I want it except for one thing. I mainly use the Tablet for drawing, not handwritting, and the dynamic responses annoys the _ out of me. In the case where you do not know what I mean, is the drop of water like effects when the pen touches and in vista, you could easily turn it off in the device stylus and input options.

    See: http://windows.microsoft.com/en-IE/windows-vista/Turn-visual-feedback-on-or-off-on-a-Tablet-PC

    But what I thought would be an easy problem to solve with a quick google search has now been irritates me for the last few hours. So, any ideas out there? I don't care if it's a registry hack, patch or whatever, but you must be able to change it somehow, is it simply a few menu options I was dominant or missed?

    All responses appreciated, thanks.

    1. Open Local Group Policy Editor: Run... gpedit.msc
    2. Navigate to user Configuration - Administrative Templates - components - Tablet PC - Windows cursor
    3. Activate the parameter disable the comments of pen .

    Thanks, I was waiting for this month! The recent updated driver Wacom as well, I now how Windows 7 + Wacom works well. He doesn't understand why it is not as if it was in Vista yet, giving you more control over what comments you wanted to see.

  • Windows 7 / cannot turn on Windows Defender

    Hello

    I'm running Windows 7 Pro. I have no antivirus running software and or installed. I have no signs apparent or perceptible to a virus infection or malware on my PC. Everything seems to work very well. Today, I checked on Windows Defender to see how it worked and possible search implemented to update and the application has been disabled. I was not able to re - turn Windows Defender on or via the Panel control or even after attempts to modify the Windows registry.

    In the registry, I sailed to "Windows Defender" and I chose 'DisableAntiSpyware' then 'change '. I've changed the 'value data' from '1' to '0' and no change just the following error as you can see. I tried to remove the "1" value in the "value data" and still no change, just the error message. Here is the error message I received: "error editing value cannot change DisableAntiSpyware: error writing to the new content value.

    I don't know if it is advisable to do so, but I even tried in vain to remove 'DisableAntiSpyware' from the registry and I got a different error message: "error deleting values unable to delete all specified values."

    I consider myself a moderate computer user. I can install memory sticks and even a sale of hard drive option, I'm not all that only warned. Can someone please? I only want to activate Windows Defender continue to use it again.

    Thank you

    Malware does not always of obvious signs.

    On Windows 7, Windows Defender is not complete antimalware application.  You can find details on what he do in the section appropriate forum - Virus and Malware Note that Windows Defender on Windows 7 is not the same application as Windows Defender on Windows 10.

    I urge you to cancel all changes made in the registry.  You have no way of knowing what effect these changes could have in the future.

    You really need to have an anti-malware application installed.  You can install MS Security Essentials for use until you have the time to look for a decent [MSSE doing pretty bad in efficiency tests].

    After installing a utility decent antimalware software.

    • Scan your entire computer
    • scan all computers which were networked with her and
    • Scan all USB keys, external hard drives & other devices containing storage such as MP3 players that have been used in the computer of the object or one of the computers which were networked with him.

    - - - - - - - - - - -

    Opinions on the antimalware utilities vary.  This is a support forum for users where users ask questions and answer questions users - there are both good & bad opinions on most of the anti-malware utilities.  Some of these views were clearly trained many years ago but have persisted as prejudice blind while it was impossible for me to draw a strong conclusion of the opinions of the users.

    I read several reviews online [PCMag & others] and noticed that many of them according to their critics on the very source of the results of tests of effectiveness .  So I investigated this source directly instead.  I studied the results for Windows 7 and Windows 10 Android so that I could use the same solution on them all.  I limited my detailed studies of these utilities that had reached the maximum score for effectiveness [detection & prevents malware] and then ranked compared to other factors presented as their load on the computer.  The shortlist was Norton, ESET, Bitdefender, Kaspersky and trend.

    Initially, I bought Norton.  It does not load the system in the way that it used to do years ago.  However, as several users reported in this forum & in the Norton forum, was undetected errors of installation on Windows 10 which resulted to the built-in Windows Defender is not properly disabled with implications that follow on Windows update.  When it became clear that their helpdesk didn't have a clue about the problem, I put in a cell.

    I finally chose Bitdefender.

    BitDefender online technical support is also useless that almost everything the world online helpdesk, but I decided that the efficiency was the most important factor.  BitDefender support get there late account, but only if you repeatedly tell them that their previous response has not correctly solve the problem.  The only decent helpdesk, I found was Malwarebytes, which were excellent, but their software has not released very well in tests of effectiveness.

  • Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people

    Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.

    can anyone in the customer support to disable this?

    Hello Terry,

    I checked the serial number and found that you have enough number of activations left to install on 2 computers.

    Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.

    My direct email: [email protected]

    Chat Support email:

    http://helpx.Adobe.com/x-productkb/global/Service1.html

    Kind regards

    Rave

  • Cannot start Toshiba C50 all I get is "preparing to configure Windows not to turn off your computer.

    Original title: startup

    When Toshiba C50 starting all I get is "prepare to set up Windows do not turn off your computer" I let it run all night, but always the same screen morning

    Hi John,.

    Thanks for posting the request in Microsoft Community Forums.

    You remember the updates that you installed recently?

    This problem normally occurs when updates could not set up within the system. It can also occur if there is no third-party program conflicts.

    To resolve this problem, use the following methods, starting with the first method below. If it solves your problem, click on the following method.

    Note: Do not restore/update system for the moment.

    We will try to put the operating system of this situation and then try to install the updates in the clean boot state. You also try to run the Windows Update Troubleshooter to see if that helps.

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    http://support.Microsoft.com/kb/949358/en-us

    Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

    Warning: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

    Hope this information helps. Response with status so that we can help you.

  • I am unable to get Windows Defender to turn on (he had been on, then returned to off) simply don't respond to a click.

    Windows Defender is disabled; I can't not do back on... no response when I click.

    Windows Defender cannot be used with AVG, McAfee, MSE or Norton.  It is part of the Vista and Win 7 operating system and cannot be uninstalled.  It must be uninstalled XP if you use AVG, McAfee, MSE and Norton.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

    Windows Defender and Microsoft Security Essentials

    If this does not solve your problem, please post back and elaborate detailed about your computer, AV programs, etc...

  • My computer is stuck on the preparation set up windows do not turn off the computer__

    I bought a new Toshiba Harvey Normans form - everything was going well until I turned the thing on and comes from this sign prepare to set up windows do not turn off the computer - 30 hours so far... everybody is why if there is a problem is - it may not be fixed. I cannot F8 or do something because when you stop and restart the computer, what happens with the same... also say how I get to the menu restore when I can't cross the saying prepares to set up etc etc, I'm typing this from my old computer and I get very very stressed to this topic

    Take it back to Harvey Normans. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Defender is turned off (error: 0x800705b4 - timeout period)

    Running Vista Home Premium (X 64) Svc Pk-2/AMD Athlon Dual-Core QL-62 2.00 GHz.

    Cannot access the startup program control. The system indicates that Windows Defender is turned off, however, when I try to Turn It On, I get the error msg.

    Checked the status of Windows Update and the indications are that all Windows Defender updates are processed without error, just impossible to start and

    use Windows Defender.

    Hello

    If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's one more detail to access startup programs, etc.

    Use the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    See you soon.

  • Error message: "Preparation set up windows, do not turn off your computer" when to stop the system.

    Original title: closure of the problem

    Almost everytime I turn off my laptop, I get the message ' Preparation set up windows, do not turn off your computer . Then it takes forever to finally stop. Suggestions for this problem?.

    Hi ArthurCosford,

    This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system.

    Step 1:

    You can check the windows updates history to discover updates recently and failed to install.

    For more information, you can consult the following article:

    See the Windows updates are installed

    Step 2:

    If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

    a. to download updates from the Microsoft Download Center

    b. Enter the item number in the field search and download the same.

    c. double-click on the downloaded file.

    d. click on run and follow the wizard to install it.

    Hope this information is useful.

  • Preparation configure Windows not to turn off your computer

    I downloaded 34 important update on my laptop with windows 7 Edition home premium and have downloaded the updates, then told me I had to restart my computer, I restarted my laptop and for the last 6 hours the screen says "preparing to set up Windows do not turn off your computer and I can't do anything because my cursor itsnt same here so it's just stuck on this one screen"

    It ended up I had a problem with my computer and had to have my computer wiped and reinstalled 7 windows

  • Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

    Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

    Hello

    If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

    There is nothing to worry.

    Using both programs at the same time can cause system conflicts, etc.

    If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

    "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

    Right click and select Properties , ensure that Startup Type is automatic.

    Once modified, click apply and OK.

    Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

    .

    If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And for now, change startup Vista programs without using Defender, use one of these methods:

    "How to use MSCONFIG in Windows Vista"

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    Or the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    See you soon.

  • Windows Defender is turned OFF. How can it be turned on... MSGE error Ox800106ba

    (1) I tried to access "Windows Defender", but when the message came he said... "Windows Defender is turned OFF"error message is Ox800106ba. I do not know how to enable Windows Defender so can help you please?

    (2) I don't know if I'm allowed to ask two questions, but I will ask and someone will tell me if he is not accepted!

    I had problems with the pages fly up and down when I click on it with my mouse... I have a laptop.  It is the first time I met this problem... I don't know if there is something else you need to know me on this problem.

    Thank you.

    You are welcome.

    It is not really well-known on Microsoft Security Essentials (and Norton, AVG, McAfee, etc as well) disable Windows Defender.

    The problem is the cause of much concern for people.

    But all is well that ends well.

    And thank you very much for the reply.

    See you soon.

Maybe you are looking for

  • What is a plug-in?

    I've just updated Java (I think) and a box of instructions on 'Activate' and 'update' and 'plug-ins', etc. appeared. I have no idea why or what when where or or - I'm to understand and/or to do.I have read all the instructions several times, but I st

  • When Firefox opens the home page entirely fill the screen darkening the buttons/icons at the top and bottom of the page

    My cursor at the top of the navigation poster bar bar afford horizontal high to close the page. Otherwise, nothing is displayed on the screen other than the home page. Does anyone have a solution to restore a page to normal size?

  • Can I get my satellite Pro 2100 high-speed USB 2.0?

    I have a new MP3 Jukebox that can operate at USB 2.0. Do anything to get my Satellite Pro 2100 to work at speed 2.0 that it currently only works with USB 1.1? Sorry, but I'm not very technical.Hope someone can advise meSee you soonBob

  • Designjet z6100: z6100 paper jam

    Have a friend with a Z6100.  Said he was printing something and transport just stopped.  Indicates a paper jam error and a 86:01 error.  He said that it is certain that without paper in the paper path but cannot get the error to clear.  He jumped on

  • Satellite U400: Command buttons do not work properly

    Hello I have exactly the same problem.Control buttons only work when I disable %ProgramFiles%\Toshiba\TBS \HSON.exe but I can't set them for a specific program.In the assistance of Toshiba, there is no button name in the list (with or without HSON.ex