T60 thinkvantage key works but the volume buttons don't work do not

Similar Questions

• the volume button on my computer does not work, when I turn the sound upward just bar falls to zero, no idea?

  can someone me, help the sound icon on the bottom of my scree of the computer doesn't work, when I puch the bar until you get sound on my computer, it just goes back to zero all the time...

  Hi JacquelineStueck,
   
   
  Parameter by default on your computer would be to reduce the volume when inbound communications are detected.
   
  a. change the setting in your control-> Sound-> Communications tab panel ' doing nothing '.
   
  b. click on apply. Click OK.
   
  If this does not help, perform the clean boot in order to identify the request at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Additional reference on:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• shortcut key to increase the volume is no longer working

  I used to be able to press fn + the "up/down" arrow to raise and lower the volume, but since one of these updates to windows, this function no longer works.  It is very annoying, because now I have to move my mouse touchpad to its little icon in the corner and listen to jarring 'BEEP' in my headphones every time I want to adjust the volume.

  It's very weird, because the "fn + ' button still works with the other shortcuts: for example, fn + F7 is still the brighter screen, etc.  Only the volume button, I use the most, has stopped working.

  I looked everywhere to try to find where I can fix this, but no use.  These windows updates are sometimes annoying, because they occur without direct permission and always seem to ruin what was once entirely well work.

  I have Windows Vista Home Premium 2007, on a Toshiba computer that I bought in late 2007.

  Can someone help me solve this problem?  It seems that it should be easily fixable, but I am at a loss.

  Hello evelynann,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  How long this issue has taken place and is there any hardware or software changes made to create this problem?  If so I suggest do a system restore to the point that it work properly.  I would also go on the manufactures website and download the utility, which allows me to use the fn keys.

  System restore

  www.Toshiba.com

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• Satellite U500 - the volume buttons do not work

  Hello

  I just bought a Toshiba Satellite U500 two days ago and already problems :(

  It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
  The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.

  Help, please. Is it possible to re-install the drivers?
  The only solution I found is to disable them using HWSetup...

  Great news. Thanks for the comments!

• computer laptop Lenovo, but a red cross that pop up on the volume button and it s saying no audio device is intall

  I have a computer laptop lenovo, but a red cross that pop up on the volume button and it, s say no audio device is intall

  I want to know how can I solve this problem

  The following link might be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

• Customer reviews second day in a row: and you should inform your contact at Echosign I couldn't fill it electronically via my iPhone in Safari or Chrome.  I got the signature part via mobile phone to work but the submit button would not FIR

  Customer reviews received the second day in a row.

  And you should inform your contact at Echosign I couldn't fill it electronically via my iPhone in Safari or Chrome.  I got the signature part via mobile phone to work but the submit button not not fire and typing method did not work at all.  Suppose what echosign knows the percentage of people who are currently working off the coast of their mobile phones.

  WTF?

  Aaron, no thanks to Adobe (and a big thank you using Google Apps,) I finally could solve this problem.  The way the document authenticates in the back-end is through Google + Apps Admin profile.  Once I entered in the Console administration, compatible Google + for the created domain a + profile for the admin of the field, the auto shape filled the signature form after that I have authorized access to authentication on the shortcut menu.  Not sure if your situation is in Google Apps, but even if not, I'd be willing to bet that the problem on your side is the account that is used for authentication when you open your form.  I hope this helps!

• Satellite P300 - one key works is not on the keyboard

  Hi all

  Someone has a proposed solution to fix a key works is not on my laptop? A letter on my keyboard 'letter b' has stopped working.
  Is the laptop Satellite P300 - "PSPCA-01U013.

  Thanks :)

  Hello

  Maybe there is no contact this button.
  As far as I know, you can not solve simple buttons. You can remove the key caps but I put that this problem is related to the plug defective or similar then it seems that you need to replace the keyboard.
  Keyboard can be ordered from Toshiba ASP in your country. If you have no experience in the replacement of parts, then I recommend asking a support technician.

  Good luck

• Laptop does not turn on but the power button is on ip

  I just bought my HP Pavilion 360 less than a month ago and it's been used for research and schoolwork. No virus or threats have been detected. It was working fine today until I had to load it. When it was fully charged, I turned it on and the screen just frozen. I tried to shut down by pressing the power button, but it did not work. Now, to just black screen but the power button turned on (meaning it's on). What should I do?

  1. don't remove the battery from your laptop

  2. just to unplug the AC power from the laptop adapter

  3. press and hold the power button on your laptop for 1 minute

  AFAIK, this should make the difference

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Acer Iconia tab 10 B3 - A20 crashes when you use the volume buttons {has only "System-UI"}

  When I press the volume buttons, I get the error {has only "System-UI"} and the screen goes black.

  I have tried factory reset already - did not work.

  Interestingly, the error doesn't occure while watching videos.

  Pls help its really annoying

  Well the new update solved the problem for me

• Listener of the Volume buttons and switch off & on

  I want to do tha background applications and I would add the listener for the Volume buttons and light switch off & on. Please help me how I can do this.

  Thanks in advance.

  Thanks peter & simon. Its has helped for the my requirement.

  public MyApp() {}
  Push a screen onto the stack in the user interface for rendering.
  pushScreen (new MyScreen());
  addKeyListener (new ShortcutHandler());
  }

  private class ShortcutHandler implements KeyListener {

  {} public boolean keyChar (key char, int status, int time)
  Returns false;
  }

  {} public boolean keyDown (keycode, int, int times)
  If (Keypad.KEY_VOLUME_DOWN is {Keypad.key (keycode))}
  Returns true;
  {} Else if (Keypad.KEY_VOLUME_UP == {Keypad.key (keycode))}
  Returns true;
  {} Else if (Keypad.KEY_LOCK == {Keypad.key (keycode))}
  Returns true;
  }
  Let the system to pass the event to another auditor.
  Returns false;
  }

  {public boolean keyRepeat (keycode int, int times)
  Returns false;
  }

  {public boolean keyStatus (keycode int, int times)
  Returns false;
  }

  {} public boolean keyUp (keycode int, int times)
  Returns false;
  }

  }

• Do not add the Volume button to Reconfigure VRA 7 VM

  Hello

  I try to give volume to my virtual machine using action reconfigure. But I can't see the volume button in the storage tab.

  Can I change CPU/memory/network. I can also change the first size of HARD drive (but I wasn't looking for it).

  This is normal, or I missed something? I use 7 VRA.

  Thank you.

  Haining

  Set the size of max storage to virtual machine components in the blueprint and try again.

  If Please note, a new application and the VM based on the BP put to update her opportunity.

  Wanli

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.