AppleTV stuck on the screen with apple - I restart, held buttons...

Similar Questions

• HP Pavilion HPE h8 - 1260t CTO: stuck at the screen with the words "Press ESC for Boot Menu" on the bottom

  I unplugged the graphics card to clean dust. After that I connected everything again, he stuck to the blue screen with the words "Press ESC for Boot Menu" on the bottom. If I press ESC at the beginning, it will go to a black screen and it will show the basic information of the computer (information about the processor and memory). It also show this black screen, "Press ESC for Boot Menu" on the bottom and it will show "Start menu" in the lower right corner. If I press F8 at the beginning, it's going to be the same black screen, but it does not "Start menu" show in the lower right. If I press F10 at the beginning, it will go to the same black screen, and it will show "setup" in the lower right. Can someone help me solve this problem? And thank you very much!

  So I suggest to look at the following and try to 'Clear the CMOS settings' as described at the bottom of the page: HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-CH2 (Chicago).  Then see if there is no change at all.  If there is no improvement, then use the following http://www.hp.com/contacthp, fill in the form, create a folder for your question and then use the information to contact HP.

• Windows XP crashes intermittently when stopping. Stuck on the screen with the default windows background color and the mouse pointer.

  We are an OEM that systems of electronic Assembly is based, in our machine is a PC running Windows XP Professional that provides the interface for the operator. Some of our systems have begun to crash intermittently when stopping.  Up to now we have seen it on three machines.  There has been no change to hardware or drivers that we put on these machines.

  The PC is supposed to stop at the point were he said "It is now turn off your computer", but it hangs when the only thing on the screen is the default windows background and the mouse pointer. The mouse moves, but that's all. He is unresponsive to ctrl-alt-delete, or any other entry.

  This was reported 5 times, and in any case there's nothing in any log file which would tend to indicate where the problem is maybe.

  I guess we have a bad driver or device, but the problem only happens once all stops of 5-10, and only after the machine is turned on for a while.

  I just turned on the detailed status messages, but they did not stop the machine since.

  What I asked is: is it possible to get windows to connect to all events stop? I really want to know what he was doing when he stopped.  Can someone else think something I can look at, or a better way to debug this?

  Re: a suggestion on this new monitor to 'prove' is the source of the problem
  Disconnect it, connect a type non-ecran touch "ordinary".
  stop/restart in safe MODE, make sure that the old monitor is not appear in the Device Manager [what we used to call a ghost]
  If it IS, delete it & uninstall the sw provided with touch screen
  Reboot in normal mode
  Try a stop
  If you get the old orange it'S now SAFE, tell the seller about IT.

• Weather gadget stuck off the screen

  I installed Vista to Windows 7 on my Dell laptop. The Weather Channel gadget is stuck off the screen, with only a small part visible. I can't move it, but I can open it from the small arrow is the only thing that I can see. How can I take off it to move on the desktop?

  Hello Smarski,

  I don't know what you see for the arrow. I installed the Weather Channel widget and find the normal buttons, including relatives, gadget drag more big size, Options. Try to right-click on it and using the menu shortcut or select move and move the gadget, or select close and then open again to place it in the default location on the desktop.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help! My Apple Watch is stuck on the screen of weekly activity

  Hello

  My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

  Hello

  There should be a link to the upper left corner of the screen.

  Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

• iPad2 9.3 upgrade stuck at the screen of the unavailable activation server

  I tried an ota on my iPad update 2 and it is stuck on the screen of activation with an error message - activation server is temporarily unavailable. tried rebooting, connect to iTunes - nothing works... Any help on this would be welcome.

  BTW... my iPhone6 and mini ipad updated very well...

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• computer is stuck in the screen that lets you choose Safe mode or start normally

  Original title: stuck

  My computer is stuck in the screen that lets you choose Safe mode or start normally. When I choose that it just goes back to the same screen. stuck in this screen

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Windows 7 Enterprise - screen is stuck on the screen 'your computer is locked.

  Hello

  I have a computer for no reason while not using it decides to lock and stuck on the screen "computer lock you."

  I already have several times, power options changes since I work in a corporate environment all the machines are defined with the same question. All the computer we have, this is the 1st time that this issue has already shown. Do not know what could be causing the computer to be lock up on this screen.

  The computer in question are pushed constantly updated and have all the updates of the system. It is a desktop Lenovo M93p 8 GB if ram and a 256 GB SSD running off a Core i7. A reboot clears the problem for a while, but do not recur.

  Event logs see the errors for Schannel, application of group policy management and a problem of Netlogon. Not sure if they are related to the issue.

  Any help will be appreciated

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• The computer is stuck on the screen of the Aptio Setup utility.

  My asus laptop is stuck on the screen of the utility facility aptio how this return to the start screen

  Here is the Article of the same

  Try a 2nd

  • Stuck on aptio Setup utility, cannot close the Setup utility...
  • [Aptio Setup Utility] ASUS N56VJ need help - Windows 8
  • Aptio Setup with a keyboard utility no longer
  • Can't get out Aptio Setup Utility screen
  • My X502C Asus Notebook is stuck on Utility Aptio Setup

• I click on options on the screen with General, research, etc. I can't click anything. I reinstalled it. I can't react

  When I click on the screen with the general options, the search, privacy etc.. I can't click anything. The page will just die. I reinstalled it. I can't respond to anything

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages b

  If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages by using Outlook.

  See this article.
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• Cannot adjust the brightness of the screen with the keys Fn on new L540 (8.1 x 64)

  Hello everyone. I just bought a new L540 with 8.1 of Windows x 64 on it and have met a problem that I see is apparently common. While my other Fn keys work as expected, I can't adjust the brightness of the screen with them. By pressing the buttons just does nothing and the laptop is in running at full brightness at any time, even on the battery. I installed the latest driver for managing power and from what I can tell, there is no version of the management software supply for something newer than Windows 7. I also installed the latest driver for the shortcut key (in fact, I installed all the latest drivers for this machine.) I read in another thread that this may be caused by the latest driver from Intel's HD graphics card but in fact, I can not install even this driver (said my system is not supported) so I always use the latest version of the driver Lenovo provided.

  Can someone please help with this? I want to be able to quickly adjust the brightness of the screen when it is on battery, but I can't do it right now. Thank you!

  I have the same problem with my L540. It started with the BIOS update to version 1.65. Because I have not found a solution, I went back to BIOS version 1.64, where all the brightness options are there and are working properly.

  You can download older versions. When on the page with the new drivers (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS037285) go to BIOS driver 1.65, then choose "learn more." At the end of the next page, you will see all the old versions.

  You can install the version 1.64, you should choose the Option "Secure RollBack prévention" in the BIOS: restart the computer. When you see the option "to interrupt normal startup, press enter", press ENTER. Once more, press ENTER. Press F1 to enter BIOS Setup utility. Click on 'Security'-> then "update Bios UEFI Option'-> then"set RollBack prevention. " Change this option to "disabled". Press F10 to save the configuration changes and exit.

  After you restart Windows, you can install BIOS 1.64.

  Another possibility is to wait for the next version of BIOS...