Tab MCU 4220 Gateway

Similar Questions

• Questions about VCS, MCU, ISDN gateway license

  Dear Expert.

  I question of license on my next device.

  (1) I have:

  VCSC - 10 calls Non-traversal, crossing 100 calls license license

  vcse - 5 traversal calls

  If I register the mcu and the endpoint to the VCSC as the guardian h323.

  I should have a 15 (5 calls traveral and 10 calls non-traversal) sites h323 conference call simultaneously on the MCU?

  > If I record my MCUS and endpoints to the ISDN gateway as the guardian h323.

  > I should be able to do an 18 sites (1 h323 calls and ISDN 17 * 128 Kbps) conference at the same time call

  > on the MCU?

  GK embarked on telepresence ISDN Gateway has no limitation for the number of concurrent calls.

  Limitation is only for the registration number.

  As gateway ISDN support audio connection gateway exclusively, with simultaneous simple T1 (T1 = 24 b, PRI = 23 b = D), maximum number of calls is superior to '18' as audio call consume only 1 b-channel.

• Cisco TelePresence MCU disconnects a session IP

  Now I have a MCU 4220, two VCS (neighbouring) and a version endpoint MXP 95. MCU is 4.3, and the version of VCS is X5.2.MCU are recorded in a vcs and 95 MXP is recorded in other vcs. Two VCS are nearby. Now MCU makes a call with MXP 95, but after a minute or so, MCU drops the call. I tried several times, and the situation is the same. The message to MCU I founded is "h.245 network connection error". I checked the network, everything is OK. I took an another MCU 4505 to test. Nothing wrong happene and the call can work well.

  Please give me some advice.

  Thank you.

  Hi do you have a firewall on your network where traffic can be? See you on your video mxp for this minute?

  / Magnus

  Sent by Cisco Support technique iPhone App

• TMS with a cluster of conductor?

  Hi, would appreciate any guidance.

  I built a group of conductor that I added to TMS for the purpose of planning appeals.

  I'm afraid that TMS does not seem very "cluster aware". All 3 devices (2 drivers + driver managed MCU) appear in the tab MCU, which does ' t seems correct.

  How a failure of conductor is managed by TMS? It is based on the standard MCU failover?

  How managed MCU port count works in a cluster?

  Thank you!

  Clusters of TMS and conductor is not currently supported.

  Sent by Cisco Support technique iPad App

• II Gateway and TS-Intermidiate file requirements

  Hello

  I asked in this thread on the TestStand Intermidiate file.

  http://forums.NI.com/T5/NI-TestStand/requirements-gateway-TS-Intermidiate-file/m-p/2288998/highlight...

  At the time I write my own Tango intermediate file generator. To make it simple as possible, that I tried to draw the OR s her. I couldn't explain one of the attributes is: "canGenerateResults" in the step element tag.

  Is it possible to tell me how this value of the indicator is created?

  Concerning

  Jürgen

  Hi Daniel,.

  what you have is the attribute: recordResult.
  but the word 'sequence' reported the flag at right.
  Attribute: canGenerateResults ist created by.
  Sequnence properties-> tab: general-> the box off the result recoding for all stages.

  Concerning

  Jürgen

• Window pops up telling me that I have registored my gateway device

  Window pops up telling me that I have registored my gateway device, I know because I registored TI. Appears again and again, me taking off full screen. How can I get rid of this pest?

  Hi GaryBaugham,

  1 windows operating system you are using?

  You can check for any option the utility for registration of entry door to the startup item and turn it off.

  To disable the option, follow the steps

  a. click the Start button, type msconfig in the search box and press ENTER.

  b. click on the Startup tab, scroll down and uncheck the option of the gateway registration utility. Click OK to save the changes

  c. click on leave.

  d. restart the computer and check.

  For more information, you can consult the following link to disable startup items:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  You can also check with Gateway tech support and find the issue.

  http://support.gateway.com/support/ask_gateway.aspx

  Hope this information is useful.

• is windows xp home edition compatible with gateway mseries laptop?

  I want to convert my computer laptop gateway mseries from windows vista to windows xp home edition.  the specs for the laptop are the following: manufacturer: gateway, model: m7315u processor: intel dual core 2 GHz ram p.: 1.5 GB I have windows xp home edition activation code, but he lost the installation cd and I'm tired of every time that I try to do something that requires administrative permission (which my user account has) the computer crashes.  I know that windows xp home edition is being abandoned, but she always work better for me than windows vista (in my opinion)

  Hi Xircal,

  The computer manufacturer often have the same drivers for a series model they release

  But the OP would be wasting their time on installing XP, so bridge never provided XP drivers for this particular model. This is one of the reasons why I suggested that the OP contact Gateqway Support.

  The point of the OP's question is that they want to replace Vista by XP

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here's the line of the OP: "I want to convert my computer laptop gateway mseries from windows vista to windows xp home edition.

  In the link you give, it shows being available for model 7300 XP drivers.

  : http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3014

  As the OP says that Vista is installed, why this model 7300 only Vista drivers available for it by default, if it is the same material as the M-7315u?

  See you soon.

• Wireless fails & can't get wireless connection tab is displayed

  I can't connect to the Internet wirelessly. I have a Dell Latitude E6510 with a Half-Mini of WLAN Wireless-N DW1501 card.  According to the website of Dell and the Dell technician who tried to help me, I in fact installed the right driver for the card: the DW WLAN Card Utility.
   
  The driver recognizes my U-Verse (router) gateway, but my browser cannot see the web. I've tried everything I can think of but to no avail. I tried:
  turn on/off Wireless Auto Configuration
  -deactivation of the DW WLAN Card Utility
  -modification of the parameters of the utility (for example, turning off the option to let the utility manage wireless)
  -Uninstall and reinstall the utility
   
  VERY IMPORTANT: A constant is that the wireless network connection dialog box does not always display the Wireless Connection tab. I think if I can just come back to this tab, I can have Windows configure my wireless and everything will be fine.
   
  Help!

  Hi grabarr1,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step below to reinstall the Automatic Configuration on the computer's wireless service.

  (a) click the Start button and then click Control Panel.

  (b) in the Control Panel window, under Pick a category, double-click the network and
  The Internet connection icon.

  (c) in the Connections window network and Internet, in virtue where choosing a control panel
  icon, double-click the network connections icon.

  (d) in the network, LAN or Internet Connections window high speed, click on for
  Select the icon for the connection to the Local network.

  (e) in the menu bar, click file.

  (f) on the file menu, click Properties.

  (g) in the Properties window of connections of Local network, on general tab, click on the
  Install the button.

  (h) in the select network component Type window, click the type of network, on...
  box, click to select the icon of the Service.

  (i) click on the Add button.

  (j) in the Select Network Service window, click the disk... button.

  (k) click on the OK button.

  (l) in the window to install it from the disc, click Browse... button.

  (m) in the window to locate file, navigate to the C:\Windows\Inf folder (it is a
  hidden folder, so if you are unable to see, what you need to do is to open the windows
  Solution Explorer, click on tools and select Folder Options. Go to the view tab and scroll down
  until you hit the "Show the hidden files and folders" option and check it. Also
  you will need to uncheck the option "Hide protected operating system files
  (Recommended). ("Click OK when you are finished).

  (n) click on NETWZC.INF.

  (o) click on the Open button.

  (p) in the window to install it from the disc, click on the OK button.

  (q) in the window select Network Service, in the Network Service box, click on for
  Select Configuration automatic Wireless .

  (r) click on the OK button.

  Restart the computer)

• can u please tell me what kind of drivers are use in gateway e4300

  I'm currently updating my windows xp and there is no sound

  Go here: http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=2648 and select your operating system from the drop-down list. It seems that you have a Realtek or a Creative audio chip. You can use something like SIW http://www.gtopala.com/siw-download.php about that. Scroll to SIW 2011 (build 1029) Multilanguage Home Edition.
  Once you determine which audio chipset you have, download the file from the bridge and install it.

  SC Tom

• My computer mx6214 gateway laptop has Bluetooth function key, but I don't have a driver, where can I find it or dwnload it?

  where I can download the driver for my computer bluetooth portable gateway 6214 for Windows XP

  Hello

  Try the steps from the link below: http://support.gateway.com/s/Mobile/SHARED/FAQs/1008796faq40.shtml

  Reference: http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3138

• "Modem on Bus High Difinition Audio device" error on found new hardware when you start your laptop Gateway mx 6214. He can not find a driver to install and fix this? Is there a driver or a fix for this problem?

  Showes up like a yellow question mark in the Devces system as 'other '.   Cannot find a driver to install, both causes a loop continues when starting, new hardware found and cannot find a driver to install?

  Hello

  Download and install the drivers from the link below after selecting the operating system

  http://support.gateway.com/product/default.aspx?tab=1

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ERRO 'bad gateway entered' after firmware upgrade BEFSR41

  I have updated the firmware on my router Linksys BEFSR41 V4.3. On this router I used Statis IP (if DHCP active). It worked well on my network, until this upgrade. Now when I try to ad another static IP address, or when I want to change something in the Routing tab, I get this message " bad gateway entry! It should be the same WAN IP subnet "." Strange because I have not changed anything in the settings.
  I did a full reset on the router, still the same problem.

  Any suggestions?

  Enable the DHCP server on the BEF. That's all. There is no need of any static routes in this configuration.

  If you enable the DHCP server, either change these static IP 192.168.1.100 etc. for addresses outside the server DHCP address pool (default 192.168.1.100 - 149) or adjust the DHCP server address pool, for example to change IP address of 192.168.1.100 DHCP start 192.168.1.10 or 192.168.1.200 or whatever you want. The important thing is that static IP addresses are not inside the DHCP server address pool.

• WRT350N: how to specify the default gateway?

  Hello

  I want to use my wrt350n as dhcp server, but to specify another router as the default gateway.

  I have my wrt350n (192.168.1.254) and another modem/router (192.168.1.1). When a client connects to the wrt350n, it is automatically assigned as the default gateway address of the wrt350 (192.3168.1.1). I would like to change it to refer to the other address 192.168.1.1.

  Thanks for your comments

  Raph

  On the configuration, on the basic settings tab page, there is facility of the Internet and network configuration. Setup of the Internet is for the WAN. Assign The DHCP Auto - Configuration so it will automatically get an IP address from the modem/router.

  On the configuration of the network, local IP address should be 192.168.2.1, subnet mask 255.255.255.0. This is where you enable DHCP. The default gateway should be 0.0.0.0 and that's fine, it assigns the LAN IP of the router.

  Once you have saved it, your router configuration page now is 192.168.2.1 and configuration page of your modem/router is 192.168.1.1.

• Router WRT54G v 8.2 - no default gateway

  I tried everything and this routher will not work!  I travel with it, when I get home for the holidays and normally I need help from someone to learn how to get the cpu to work with the wireless.  at this point, nothing works.  the modem is a westell MB. 6100-all of the lights work and when I plug my laptop into the ethernet it cord works fine.    When the modem is pluged in the router and the ethernet cable is pluged to a port on the back of the CPU that CPU says there is a problem with its ip address is the same as something elses.  the ssid wireless appears and I can connect with my macbook, but the internet does not work. I can connect to the router through 192.168.1.1 and have security etc. settings.  imy mac address appears in the list of dhcp clients... in the status tab everything seems normal, except that the default gateway is all zeros.

  someone has an idea of what's going on?

  I would like to be able to get the net on the cpu but also wireless at the same time but if only I could get the wireless to work at least would be great

  If you are not able to see any default under the status tab gateway, because your Modem and router sharing the same address IP address on the network... To your computers with the Linksys router Online... Connect to the Setup page of the Linksys router and under the Configuration tab to change "local IP address" 192.168.2.1 and click on save settings... and then you must restart your network...

  Disconnect the power from the router and Modem, wait 30 sec and first then plug in the power to your Modem and once all the lights are cover on your Modem, then you can connect the power supply to the Linksys router and...

  Now, check if you are able to go online from your computer connected to the router.

• RV082 to RV016 gateway to gateway VPN

  Hello. I currently have a RV082 to setup VPN gateway to gateway RV016 between my office and home. The tunnel is connected and I have an installation Avaya IP phone and work. The problem is when I try to open a network folder shared on my server in the office. I ping the server and at the office. I can access some folders on the server using internet explore using the method 'name \\server\folder. But I can't open the files I have premapped. When I'm on the network in the office everything is ok. When I get home I get the message "path not found network". I tried to remap and go home empty-handed. Initially, I thought that maybe it's a setting on my server but rejected since I can ping and access through the method of EI. Any ideas? I get very frustrated here! Thank you.

  I thought about it by chance after reading several other posts of similar problems.  Under the gateway to gateway VPN configuration, you must navigate to the tab advanced for the IPSec configuration.  Both options of NAT Traversal and broadcast NetBIOS must be enabled at both ends and it works!

  Thanks for your help.