< Table > code rewriting is on its own line

Similar Questions

• Hide the number in a numbered list (or to put on its own line)

  I am writing a document with headers that are numbered and come from the four levels of depth. There are six cases of the title of level 1. I would like to format it as a number with two digits (e.g. 01), then a horizontal rule, then the header text.

  I imagine that there are two options:

  1. Insert a new line somehow between the number and the heading text, and then apply a rule and shift so it lies between the number and the text. The problems I meet here are that I can't seem to add a new line between the number and the text and that when I change the format of the number 01, 02, etc, it also changes for level 2 headers (which I don't).
  2. Hide the number on the list, and then add the number as text and the appropriate format. The problem I have here, is that when I change the paragraph style (bullets and numbers-> Style of numbering-> number of virgins, it messes up my level two lists later (all first everyone start correctly with 1 (1.1, 1.2, etc.), but those in sections 2-6, all start with 0 and do not reset properly (which should be 2.1 is 0.6 after the end of article 1 to 1.5).))

  In the end, I want to see something like:

  01

  ----------------

  INTRODUCTION

  1.1 welcome in society

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.

  1.2 the responsibility

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.

  
  

  02

  ----------------

  REQUIREMENTS AND STANDARDS

  2.1 desktop label

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.

  2.2 unacceptable behavior

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.!

  I came with two possible approaches.

  First is to create the paragraph style title with a rule above and set the vertical offset to move under the first line and set the column width and add dashes left and right to refine the rule. You need to add the line breeze then manually or using find/replace to force the text to the line under the number.

  Better, in my view, is to set up the position that the two paragraphs, the first vacuum, but established the list of numbers with the following style set to a paragraph style that you use for the title of chaperones itself and which in turn the value style following the level 2 header. Together as the two first styles aligned Center and do something similar to above the rule, but I would use the following rule in this case.

  For a numbers level, you want to add the 0 in front of the marker number indicates rather than as part of the style number (this will only work if you have topics 9 or less) but the removal of level 2 and low styles, and for level 1, you must also remove any punctuation or white space after the number so the rating 0 ^ # only.

• Cleaning the table - moving of the values in a table with its own sequence

  Hi all
  
  I was responsible for cleaning up some data. Table has its own sequence and some of these sequence numbers now have empty values, I need to transfer the data about to remove these blanks.
  
  Hard to explain, so I'll illustrate it:
  
  create the table adam_test
  (index field_number number (20),)
  field_data char (20));
  
  insert into adam_test values (' 1 ', ' ');
  insert into adam_test values ('2', 'ADAM');
  insert into adam_test values ('3', 'BOB');
  insert into adam_test values (' 4 ', ' ');
  insert into adam_test values ('5', 'JOE');
  
  SQL > select * from adam_Test;
  
  FIELD_DATA INDEX FIELD_NUMBER
  ------------ --------------------
  1
  2 ADAM
  3 BOB
  4
  5 JOE
  
  I need manipulate the table so that FIELD_DATA whites are no longer there, so go back valid in the sequence lines if any gap is present.
  
  .. the desired end result would be:
  
  FIELD_DATA INDEX FIELD_NUMBER
  ------------ --------------------
  1 ADAM
  2 BOB
  3 JOE
  4
  5
  
  I may or may not remove empty lines altogether once it made, but this isn't important, that I'm struggling with the first bit for now.
  
  Any ideas how I could achieve in PLSQL?
  
  Thank you!
  Adam

  Monty77 wrote:
  What happens if the table has another column, customer_id:

  SQL> select * from adam_test order by custom,field_number
    2  /
  
      CUSTOM FIELD_NUMBER FIELD_DATA
  ---------- ------------ --------------------
      100000            1
      100000            2 ADAM
      100000            3 BOB
      100000            4
      100000            5 JOE
      100001            1 CLIVE
      100001            2
      100001            3
      100001            4 STEVE
      100001            5 MICKEY
  
  10 rows selected.
  
  merge
    into  adam_test a
    using (
           select  rowid rid,
                   field_data,
                   row_number() over(partition by custom order by case field_data when ' ' then null else field_number end nulls last) new_field_number
             from  adam_test
          ) b
    on (
        a.rowid = b.rid
        )
    when matched then update set a.field_number = b.new_field_number
  /
  
  10 rows merged.
  
  SQL> select * from adam_test order by custom,field_number
    2  /
  
      CUSTOM FIELD_NUMBER FIELD_DATA
  ---------- ------------ --------------------
      100000            1 ADAM
      100000            2 BOB
      100000            3 JOE
      100000            4
      100000            5
      100001            1 CLIVE
      100001            2 STEVE
      100001            3 MICKEY
      100001            4
      100001            5
  
  10 rows selected.
  
  SQL> 
  

  SY.

• I recently purchased Photoshop Elements. It has a redemption code on its own card but when I enter the code it says it's invalid.

  I recently purchased Photoshop Elements. It has a redemption code on its own card but when I enter the code it says it's invalid.

  Where you enter the redemption code?

  Try to help the Redemption Code

• View the information from the related table instead of the ID in several line datablock

  Hello
  
  I searched on the web, the forum and the documentation, but I have not found a solution to this problem:
  
  I have two tabs with a relationship of the master / detail of one-to-many. Block detail data shows several lines such that it can be several associations table of mater in the details and I want to display the description of the master data block instead of the field with the ID for each line in the block of retail.
  
  I tried to place an item with the option 'copy value', but then I lose the relationship of master / detail, because that is what forms wih the field id for linking blocks.
  
  Also, I've seen in other posts that I can use a view, but I can't understand how would I update or remove data then.
  
  The only thing that I realized is to the description field in its own datablock in the same tab, a relationship master / detail-detail (or master-detail-master). BTW, I don't think it's beautiful "formulas"programming"and it does too much for my needs."
  
  I guess it must be a trivial thing, but I don't know what to try next. Thanks in advance!
  
  Published by: user10278211 on Sep 17, 2008 20:13

  AAH, I think now I got your management!

  You have 1 Deptno and dname "XYZ" in the master and you want to display:

  EmpNo Ename DName
  1     User1 XYZ
  2     User2 XYZ
  

  -What?

  If so:

  1 create a new element in the retail block, let's call it DSP_DNAME, set database property to point to 'no '.
  2. create a POST-QUERY-Trigger on detail-block with the code: DETAILBLOCKNAME. DSP_DNAME: =: MASTERBLOCKNAME. DNAME;
  3. create WHEN-CREATE-RECORD-Trigger with the same code.

  That's all

• Displays each result on its own page?

  I create a blog based on a guestbook format.

  Basically at the moment I have a page 'Add Post', that stores the details of the message in a database and then when you go to the index page, all posts, including the name of the author etc. are dumped into the order.

  But I want it to be more like a blog, how do I do to display each individual entry on its own page. So, positions are listed on the home page, you click on the title and it will take you to a page with only this post?

  And another question, how would I go on display five posts on the index rather than each page? And then being able to click on "older posts" link to see the previous five positions?

  Thank you.

  Hello

  You create a new page of cfm, whose responsibility is only to display the post... lets call it display.cfm.

  This page has the ID of the post... need an ID that is linked to the entry of the database (can be as a primary key in the table that you store messages).

  All you have to do for this page to have the necessary info to display the message is to pass a parameter in the URL (called query string)... something like this \display.cfm?id=1

  You get this ID... Select the post with this ID from the database and you're done.

  On your home page, you must create the link to this page dynamically as the id will change for each entry.

  If the display page is always the same, but the content changes according to the code passed to the query string.

  With regard to the display of five post...

  You can do it in the select database... or if you have a table of entries display you only the first 5

  Then you have a link to the same page, perhaps with a different query string that displays all the...

  If you have any other questions just ask.

  Kind regards.

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards

• Firefox has its own flash player so I can delete adobe?

  I would like to know if firefox has its own built flash player, like adobe a safety risk and I would delete it please.
  Thank you.

  Unfortunately, no, for sites that require Flash, it isn't really good substitute.

  Earlier today, Adobe has released an update to solve critical problems, he admitted were in the 18.0.0.203 version. You can get 18.0.0.209 on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.

  To ensure that the Setup program can remove the older version, either out of Firefox or close all the tabs using the Flash before you do the update.

  That said, the Flash can still have secret flaws that have not yet come to light. In fact, it seems likely enough. Until this ordeal of previously unknown security flaws shakes, you might want to try this and see how it fits. To set the Flash "Ask to activate", after you have reinstalled it, open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  Then when you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash. You have the choice to allow for a period of time or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification. It will just sit there in case you later want.

• The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

  In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

  In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

  Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

  Please note that I use Thunderbird on Windows XP platform

  Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

  However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

  Thank you very much!

• Why my MacBook Pro restarts on its own?

  Why my MacBook Pro restarts on its own?

  • Note the time of the next involuntary reboot. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of reset. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• R7000 can't access admin page and IP DHCP address range changed on its own

  I noticed recently that my IP range internal from 192.168.1. * to 10.0.1 on its own. I think I got the router configured to auto update to new firmware, so I think that it updated itself and change its settings. When I try to access the admin page that nothing loads. I tried 10.0.1.1 and 192.168.1.1 and nothing comes up. I was wondering if anyone else has had this problem recently. I will be eventually provided to the factory settings and set it back up like that, but I'm hoping to exhaust my options before you go this route. Any ideas?

  I was able to determine the cause. He I warned when you say IP changes when there is a second device with DHCP. I noticed there was some new computers on my network when I watched the network file share. I use the Netgear Powerline device to do wired connections to my living room. What I think has happened is that my recently developed neighbouring apartment unit in place the internet and also uses a feature of current line. I noticed that my DNS suffix changed to a different address, which is the ISP instead of my router. I put 2 and 2 together and realized that my network was overlaps sound via the Powerline. I have never set up an encryption key on the Powerline online so it was still using the default settings and connecting to my neighbors by current carrier. When I added the encryption key, the problem disappeared and my network returned to normal. Next time I should follow the instructions when setting up new network equipment. Oops

• My XP keeps restarting on its own

  My office was just recently moved into a new room, and now his unexpected restart completely on its own! It restarts, I don't know, all 5-6 hours, and I can't seem to stop. In addition, my internet connection must be repaired each time after it restarts. I checked for a virus, but it was not her, then I unchecked the box "Automatically restart" in startup and recovery and got the BSOD error code.

  0x000000c5 (0xFF676984, 0 x 0, 00000002 00000001, 0x805515A1)

  That's all of the info, I have to give you.

  Open the side and check the General integrity... check
   
  1. Drive cable
  2. Power cables
  3. Endsure that any internal devices of part 3 have been inserted correctly.

  -Mike Hall MVP Windows: consumer http://msmvps.com/blogs/mikehall/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• LaserJet 5 PCL Overlay Macro is not 'Overlay', on its own Page impressions

  Hello!  I wrote a macro of overlay PCL.  It contains the PCL and HP-GL/2 commands to draw a shape of statement.  I tried to call the shape on a LaserJet 5 times as automatic overlay and a macro called, but whether I invoke it, filling data print on its own page, followed by a page, print out the form.  I need them to print on the same page together.

  Here's how I'm trying to run it on the command line WinXPSP3, copy the macro and data to the print server LJ5:

  copy macro.txt + filldata.txt \\ps-70ac4a\p1

  I tried to post here macro.txt and filldata.txt, but the HTML form will not let me.

  You can obtain them in ftp tatlow.com, A1234567, A1234567 password username.

  Anyone see what I'm doing wrong?  Thank you!!

  >> ... But with filling multi-page data, only the first page of data to fill overlay; the following pages have no overlap.

  >> ... (Each page in filldata.txt ends with a page break, hexagonal 0C).

  >> ... If you could please take a glance over, I put the new macro.txt and a new filldata.txt of 2 pages...

  I concatenated the two files into a single file and sent the contents of this file (using 'lpr') to the network port on my printer (alone) (LaserJet 1320n).

  Two pages are printed, both with the overlay.

  Like I can't reproduce your symptoms, I don't think that I can try realistically investigate the cause of your problem.

  {I would remove the CarriageReturn character and line break (0 x0d0a) that occur just before the escape sequence "return to PCL", because it is (strictly) should not in HP-GL/2 mode.]}

  The tool used to analyze the print file is the PRN file analysis tool in paraphernalia PCL app, available via http://www.pclparaphernalia.eu

• Installation Oracle BI Publisher and the command prompt closes on its own

  I am following the instructions to install Oracle BI Publisher 11.1.1.7.1 Trial Edition with the instructions available on http://www.oracle.com/technetwork/middleware/bi-publisher/trial-edition-install-guide-1556170.pdf

  The instructions tell you don't not to close the prompt during the installation process.  In my installation, command line closes on its own.

  Don't know what I can do.

  I'm installing on a Windows 7 64-bit PC.  I have Java installed update 7 45 and Internet Explorer 10.

  Make sure that you install the BEEP in a folder that does contain no spaces. For example "C:/Program Files/BEEP...". ». Given that space in "Program Files" the guest back sometimes charge and close immediately telling me error "path not found", but the dos window closes quickly and you will not be able to see the error. Install to a different folder. Say "C:/BEEP".

  Watch the docs below and remove the classpath as well.

  https://blogs.Oracle.com/adfjdev/entry/java_jre7_lib_ext_qtjava

  Let us know if still you faces some challenges.

  Thank you

  ~ KKT ~.