Table of contents completely destroyed export

Similar Questions

• Saved style table of contents does not export EPUB

  I created and saved a new style of table of contents, tested in its document to ensure that it looked good, added this doc to my book, all saved file and went to export my ebook. In the drop down "Styles KNOCK", the only two TOC styles avaiable are "Default" and "No. Style", and my saved style is not displayed. No idea why?

  Other info:

  -I am running a trial version of Adobe InDesign CS6

  -I'm on a PC

  -I have not yet tried to reset my preferences, but want to avoid if possible

  I've asked this question before, but was not clear on the problem because I did not entirely understand myself. Hope it's OK that I'm the reword for clarity now. Thank you!

  Hi all! POOJA has contacted me via PM and solved my problem. I didn't create the table of contents in the document Source of Style. DUH. I feel like a retard, but I appreciate all the help.

• Characters Czechs corrupt in the Table of contents

  Hello world.

  I'm working on a project large enough help in Czech. This isn't something that I started from scratch, I took during a colleague who recently left our company, so I don't know much about how it was done.

  The project is made of 3 elements, resulting in 3 CHMS which are then copied into the same folder with other CHM using some sort of algorithm.

  Once all of these files (CHMS 4 in total) are copied to the folder Help software, they are shown as a component only when you click the button in the software - which means that you see a table of contents complete with chapters of each 3 files).

  The problem is when I compile the individual CHMS, I get the message " " "characterparameters HTML help a not supported for the selected language. Do you want to continue? »

  If I continue, the file is compiled and when I open it, the table of contents seems ok. However, when I copy with the other files and open in the software (a program of type CAD) some characters are replaced with something else:

  
  

  I use Robo help 10 and the police in the files is Verdana. I read on another thread than the police could be the problem, but I don't know how to change in all files (except perhaps to Internet Options in the chm directly?)

  My regional settings are also defined in Czech when I compile the file, so it shouldn't be a problem. However, whenever I compile, I get this message and corrupt characters are displayed using the software.

  Can anyone help with this?

  Thanks in advance.

  
  Christina

  
  

  
  

  I use RH 9.

  From my experience, namely character such problems can sometimes more an art than a science. This is what it looks like anyway.

  A few issues involved can be:

  1. Language for non-unicode programs office must match the output of the Control Panel, in the dialog box language and region , on the administration tab, make sure that the language of non-unicode programs is set to the target language.
  2. Language settings in RoboHelp - under file | Project settings, ensure that you have set the language in HR in Czech for all projects. In addition, in the pod of single Source Layouts, right-click on the output and choose Properties in the drop-down list, and language , make sure that it is set in Czech.
  3. Encoding of characters in the file itself - open the file (in this case .hhc) within a text editor like Notepad ++ and in menu coding , check its character encoding. By experience, it must be on encode them in UTF-8 encode in UTF-8 without BOM.
  4. Character encoding in the tag XML - also in Notepad ++, check the coding in the first tag line 1. My hhc file that we translated into Czech, it is set to

• a Table of contents a hyperlink in the Pages can be exported to PDF Format, and there is still work?

  We wrote a history of 96 page of our community and have a vast hyperlink of contents table which works fine so that in the Pages.

  But when we export it file to PDF Table of contents is no longer a hyperlink

  Any help is appreciated

  Tom

  Pages v5.6.2 does not PDF export with functional links in the Table of contents. Pages ' 09 v4.3 exports PDFS with active hyperlinks in the Table of contents. Both tested on OS X 10.11.5.

• Table of contents exporting does not correctly - what I am doing wrong?

  Hello

  I have 2 books of ID (CC) I exported to EPUB recomposable. The first one I created worked perfectly.  I created a nice table of contents who when they are imported into iBooks the iBooks TOC was just as it was in my table of contents in the document.  The 2nd book has the file names listed in the TOC iBooks rather than what is specified in the table of contents of the document.  I checked a number of settings and they seem to be the same on both books.

  As a bit of background, the books are almost the same except that they are in different languages.  I used the same template to create documents within each book.

  Any ideas would be GREATLY appreciated.

  See you soon,.

  Lil

  Hello

  If the table of contents style is not set in the original document style, toc file name is generated instead. You have configured by Style of table of contents in the Document Source Style of the book?

  Also, the same style must be selected in the Navigation drop down during the recomposable EPUB export.

  Kind regards

  POOJA

• How to export diferent two tables of contents to epub?

  I have been reseraching french forum of responses to the question I have but could ' t find anything for my case. I am a book of plants convert epub. The layout that gave me was the printed version of the book, I use Indesign 5.5 to convert the epub book. For the results of the tests, I use Calibre and a Kindle.

  I was n style texts and images and everything is great except for the table of contents. The author needs to a content page with all the main chapters (h1 title) and an index at the end of the book with all the names of the plants: this has two titles an eglish followed by the Latin version (h2-h3-Latin and English).

  I've created two different styles of toc, one with only the chapter headings, would be at the table of contents at the beginning and the second style is for the index of plants: with the h2 and h3 titles (I checked the alphabetical button in both to have the section index correctly).

  I have two questions: the first is when I try to place each table of contents at the beginning and at the end of the book. On the page, it looks fine, but when I export to epub, I can choose only in the export Panel, one table of contents. The resulting epub has the same table at the beginning and at the end I tried several times to change the position of the tables, export settings, but I never managed to have two different tables on the same epub.

  The second question is when I had expoorted one of these tests using the style 2 for the index, I get an epub with the two tables of the same material, the index is in alphabetical order, but instead of ordering all the plants of a to z he ordered their "pairs" as they appear on the texts (first English title plants the latin equivalent of a second). How can I do to make this index order alphabetically all the h2 and h3? I need all the a, b, c,... indendently of their position in the page.

  Hope the above makes sense.

  Thanks in advance.

  Thanks for your offer of Ariel, I'm sure is a good script, but I can't affford it right now.

  See you soon

• Table of contents & sections completed

  Hi all, just generally looking for some advice here.

  I develop some e-learning.  For now, assume that there are no quiz items in e-learning.  It's a bit linear e-learning, the user must read the information on each slide, click Next, go to the next slide, etc., and so on.  Assume that the e-learning module essentially contains four sections (call Introduction, Learn, Try and Conclusion).  FYI, e-learning will take place in the Cornerstone OnDemand LMS.

  I want users to have a Visual indicator that shows that they have achieved each of the sections.  I realize account I could use the Table of contents to show this to a certain extent and that is explored in method 2, but I would like your opinion on method 1:

  Method 1:  I would like to e-learning to launch on a Homepage blade I would create, which contains links to the four sections: Introduction, learn, try and Conclusion.  The user completes each section, he was invited to return to the slide of the House.  Whenever they form a section and return to the slide of the House, I would like to a green check mark to appear next to each completed section to indicate that they have made this article.  It is important that the user is able to log out of e-learning and back and that already completed sections still see the completed (indicated by the green check mark).  I guess I would need to use some sort of advanced actions.  Is it still possible in Captivate?

  Method 2:  I realize that I could use the Table of contents and that might just be simpler.  However, I prefer the method described in method 1, because I have much better control over the content.  However, if I use the table of contents, I would like to know the best way to show the State of implementation of the section.  I know that I have to group the slides in a folder in the table of contents, if for example I could group slides 2-10 in the case of Presentation , slides 11-20 in the record learning , slide 21-30 in the folder try and slides 31-40 in the folder of the Conclusion , however each once each article is completed by the user (normally indicated in the table of materials by a check mark green) It is not shown as complete in the table of contents.  The reason for this, is that I want the user to be able to view the article in the table of contents, but not the individual slides, and it appears a section appears only as finished in the table of contents if I show one or more slidesin of this article.  Is there a way to get around this limitation?

  I largely prefer to explore method 1 and method 2 is certainly viable if I can overcome the above restriction.

  I develop in Captivate 4 and Captivate 5 - I prefer Cp4, but happy to come back to Cp5 so is there any solution.  Thanks to everyone for all the advice!

  Hello

  Maybe my blog can help you? I offer a free model as well (it's for CP5), provided that you send me an email address (can be done via private message):

  Model for reuse the script

  Lilybiri

• How to display a complete tree of the table of contents in the body of a page instead of the sidebar?

  How to display a full (project) TOC tree in the body of the pages of the section instead of the default sidebar (left pane)? Is there a simple way to do this in the application? I have not yet discovered a way to do it, but I can't get to the right place. Any suggestions?

  I don't think you can view the table of contents on a page, and even if you could, the sidebar would always be there for indexing and search. The only possibility I can think of is to create a page where you create links arranged to act as a TOC, then maybe iFrame this page in. Each book might be a drop-down list to view links to topics.

  Maintenance would be horrible and she barely meets your requirement to be simple.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Buttons previous as well as the next topic would work in a complete table of contents or only in a book?

  Hi all

  I have a project of webhelp with several books and browse sequences.  The previous buttons as well as the following topic seem to operate with a single book.  Is that how it is supposed to work?  And if so, is there a way to make it work for OCD together through all the books?  With the help of HR 2011.

  Thanks for any help.

  Diane

  Hello

  What you have to do is to create a large single sequence that runs through all of the topics in the table of contents. Exactly how do you this depends on your version of RoboHelp. For example, if you use the version 10 and earlier versions, choose the auto create option and enter 0 for the number of levels.

  

  If it is version 11 or 2015 Release, there is an interesting option provided.

  

  See you soon... Rick

• Table of contents for the edition of ePub paragraph style

  I am trying to figure if InDesign can allow us to the editor the dynamic table of contents. What we have is essentially the following:

  Chapter number (single paragraph style)

  Chapter title (single paragraph style)

  First paragraph (single paragraph style)

  We want that the ToC that gets pulled up in an eBook reader to show this:

  Chapter 1: Chapter title

  Chapter 2: Chapter title

  At present, only InDesign appears to export each as a specific paragraph style, without setting them on the same line side by side. We're stuck with:

  Chapter 1

  Chapter title

  Chapter 2

  Chapter title

  Does anyone know of a way to export the ePub is what we want rather than this broken hirarchically way?

  There is no good way to do it. We must either go to the ePub after export, or change the style, so there's a return between the chapter number and chapter title instead of a return. The second option will involve completely restyling, and get in there colon will be delicate.

• Chapter with Figures OCD does not end up in the main table of contents

  At the end of my document. I have a list of numbers. This list of figures has its name in my chapter paragraph Style. At the beginning of my document, I have a main table of contents. When I update the table of contents, list of figures chapter would end up in the main table of contents. Is there something I can do to fix that? I was thinking of a hidden layer with a second title of chapter for a list of Figures, but it's a hack. Is there a better way?

  I was able to get the table of contents to update correctly. I did two things, and I don't know which was the right one, or if you need to do both, but here's what worked:

  Export the list in the history of the figures to tagged text, and then disable Smart Rflow text and remove all executives who are in this thread, so history has completely disappeared from the file (but the pages are left behind). File > Place... and choose the story exported and auto-flow, then select those images and change the number of columns. Now, select and delete the existing text in the history of the table of contents (I left executives), then layout > TOC and regenerate.

• How to set up this table of contents?

  I want a TOC that looks like this:

  Chapter title, author, page number

  Is this possible? I've always done manually.

  Thank you

  Ian

  I can give you something that will be a little less manual, although not completely automated. This may seem a lot of work, but just a little time in the installation program, and after that, it's all copy and paste. Take a look at this screenshot:

  

  I put in a placeholder text, created a heading style and a different style (magenta text 6 PT) called For the TOC. I put in the title and the author of the placeholders, separated by a tab and set the width of the text block on something just below the width of the text block that contains the body of the text, and I collapsed height to contain the text. I put the placeholder text of non-printing block with window > output > attributescopied the image and paste it just after the paragraph of title (with a space between the title and the framework of the now entrenched placeholder).

  Then, I put the object inserted in a custom position so that no matter where the title was on the page, the frame anchored at the top of the back page. And, because the inline frame is set to non-printable, it will not appear on printed or exported to PDF documents. Once it's all set, just copy the anchor and space (to make sure that you select just those two things, you can use the story editor) and paste next securities (or securities, in your case). You then copy the titles in the main text and paste them on the title in the space provided (I used Edit > paste without formatting so that the headline style would change the style of the placeholder). You must also type the author's name when you enter the title in the space provided.

  In the table of contents, you must select the style of table of contents , rather than the heading style that you want to include in the table of contents. Make a paragraph for the real TOC style and set the tab stop, and you will have:

  Title... Author... Page #.

  The placeholder with the title, so as long as you remember to update any text in the placeholder, if you choose to update the travel documents, you should be good to go.

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• Recording on DVD - "Unable to retrieve the table of contents" error

  Hi all

  Whenever I try to record on a DVD a face "could not retrieve the table of contents.

  I tried to change the recording speed, but no use.

  When I go to properties of DVD and click on activate record it does not recognize the DVD or any CD in the drive.

  Please help

  Hello

  1. what software to use to burn cd/dvd discs? Try using Nero, Ashampoo burning studio, alcohol CD and DVD software of engraving,
  2. then, I advise you to use high quality as TDK or Verbatim media.

  3
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  If your problems persist, there may be a problem with your cd/DVD-ROM

• Table of contents not showing is not on DVD

  I need to burn a DVD with table of contents. For some reason when I test the DVD on my player, there is no content/menu. I came to chapter markers, so I don't know why they are not transferred to disk. Help, please!

  

  What do you get when you insert the DVD? Is - that the video starts to play automatically instead of the menu?

  Note: you can easily avoid wasting disks DVD sharing on your hard disk instead. This creates a disk image, you can ride as if it were a real DVD by double-clicking it in the Finder.

  In this way, you can test the result in your Mac using a DVD player (even in a Mac without and real DVD player) and you can make adjustments and re-export as many times as necessary. When you are ready, use the Finder to burn multiple copies of the DVD that you want - in El Capitan, just control - click on the disk image file and select burn. [In previous versions of Mac OS X, you should use disk utility to burn DVD discs]