Tablet cheap for labview?

Similar Questions

• Dashboard of data for LabVIEW with ad-hoc wifi?

  Hello

  We have a laptop and we run a LabView control and acquisition of data on this subject program. We would like to have access to some of the values of the "indicators through an android tablet, so during an operation manual tap on our facilities, we could see remotely what happens with some measured values in our application LabView.

  The ethernet port is not available on this laptop, it is used for a sensor. It has wifi and bluetooth adapter. What would be the easiest solution to access the LabView app on this laptop from the Android device by using the "dashboard of data for LabView" android app? For security reasons, this laptop can't access internet, but of course, we could all just put a near wireless router (and not connect to the internet), and the laptop computer and the android Tablet access the same wifi network. I guess it should work, Yes?

  Or is it possible to make a connection to wifi ad-hoc between the laptop and the Tablet and use the DataDashboard? Anyone has any experience with such a solution?

  Last question: or what a Bluetooth connection? Might work?

  Thanks a lot for the tips!

  Kind regards

  Hi man,

  I recommend you connect your tablet as you described.
  _________

  |                   | ---> Network---> sensor cable

  | DAQ App |

  | Windows | ---> WiFi---> gateway---> Tablet

  |                   |

  ---------------

  I don't think that it is possible to use the Bluetooth with the application of the dashboard of data for Android. I can't find any information on Bluetooth, only for the WiFi.

  Best regards, Stephan

• Data for LabView - Motorolla RAZR dashboard

  When view LabView, the Android Market data dashboard tells me, 'your device is not compatible with this item."

  I have a Motorola RAZR.  Any suggestions?

  Hello duane,.

  At that time, dashboard of data for LabVIEW is available on shelves.  In addition to the Apple iPad and iPad 2, Android tablets only under 2.3 or later are supported.  To support the Tablet 7 '' Android, we had to make some design changes.  It should be even more changes due to the small size of a phone.  We might consider a version for phones based on the popularity of the application on each platform and the information received in return.  For more information, see the product page or the LabVIEW Web Interface Builder and data dashboard discussion forum.

  Grant M.
  Senior Software Engineer | LabVIEW tablets | National Instruments

• Where to get cheap for Equium power cable

  Can anyone tell where to find a power cord AC cheap for an out of warranty Equium laptop.

  Hello

  I think that these spare parts that you can only buy from Toshiba service partner.
  ASP is able to order these parts directly from Toshiba.
  Therefore, contact the service guy in your country and ask offers.

• Support for LabVIEW 2016

  Can someone tell me what VirtualBench drivers will be available for LabVIEW 2016?

  Release date is... right now! NOR-VirtualBench 16.0, with the help of LabVIEW 2016, is available here:

  • Driver 16.0.0 and NOR-VirtualBench Application

  (My apologies for yesterday, does not but it takes a little while to download pages to go live.)

• Support of NOR-DNET for LabVIEW 2013

  We currently use OR DNET 1.6.6 with LabVIEW 2011. I installed LabVIEW 2013 now also on my computer and tried to synchronize all of the drivers with my installation of LabVIEW 2011.

  Well, it seems that NEITHER-DNET does not support LabVIEW 2013, at least officially. compatibility of Version of LabVIEW and NOR-DNET indicates that NEITHER-DNET 1.6.6 supports 2011 NOR-DNET 1.6.7 2012 LabVIEW and LabVIEW.

  The list NOR system driver November 2013 set OR DNET 1.6.7 defined pilot. When I try to install it, there is no support for LabVIEW 2013.

  My question is, if there is a plan to include support OR DNET for LabVIEW 2013 or later in the game to pilot?

  I copied the directories vi.lib\DeviceNet and vi.lib\nidnet of LabVIEW 2011-2013 and I can load my programs without any problems. I always did not build an executable and does not run on the test set-up, but projects can be loaded in LabVIEW 2013 without any screws of brocken. should I expect any problems running LabVIEW 2013 with the NOR-DNET to 1.6.6 and 1.6.7 driver?

  Nick

  There should not be problems but it is a former pilot, we will not be updated for the future version of labview.

• Is there a Module NXT for LabVIEW 2010

  Is there a Module NXT for LabVIEW 2010?  If not, are there plans to bring a available and if so, when?

  Hello

  I found a link to a download for the module 2010 here.

  I hope this helps.

• How to convert the file with VI for LabView .lib to CVI?

  Hello

  I have the .lib file for my lock in the amplifier. The lib file is written for labView and already contains a visual interface (like ActiveX). The point is that I need this file for programming in CVI (8.5). How can I convert a LabView ICB .lib?

  Thank you.

  Denis.

  You said that you had a .lib file and in fact you have an llb file. There is a huge difference between an "i" (eye) and a 'l' (ell).

  There is a LabVIEW Instrument Driver Export Wizard but it's only for new pilots of project lifestyle and you need LabVIEW. There is no other way to convert a LabVIEW driver to a driver of the CVI. If the LabVIEW driver uses methods and properties of the ActiveX, you will need to write the same thing in CVI.

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• Entry value change when he went from teststand for labview.

  Hi all

  I try to spend my labview VI value hexadecimal teststand. When I run the VI independently giving the value as 00000010 I get the expected results of the VI.  But even when value is passed through local variable teststand, when it reached VI of entry it was conerted to 000000 A 0 and so I'm getting wrong output.

  I am not able to understand how the value goes to the value of the input parameter when she went from teststand for labview.

  Any ideas?

  I discovered the error.  I was entering the value in the wrong format in teststand... instead of 0 x 10 I've entered only 010 and was therefore is converted to A.

• Download assessment for labview .vi editor 64-bit?

  I am trying to download .vi lead editor for LabView. I'm using windows 7, 64 - bit os. I installed LabView 8.6 run-time engine. So please can anyone suggest where I need to download the LabView evaluation Editor.

  You can downbload an evaluation version of LabVIEW from here.

  For future questions, please refer to the LabVIEW forum: this forum is dedicated to LabWindows/CVI

• 1208fs for labview 10 usb connection problems

  Hello
  I'm relatively new to Labview and just improved labview 10. I used 6.1 before and had no problems using my mcc Board of 1208fs USB to run experiences before. I tried to connect even to labview 10 on my new computer, and the only thing that will connect to the instacal is. Ive plugged throu instacal, but is not visible in the list of I/O that selects the channel to use. Any help would be appreciated.

  Thank you!
  Andrew

  By the way, my os is windows xp

  Andrew,

  MCC daq devices have a different set of drivers for LabVIEW 8.2.1 LV versions and newer.  See http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx this is ULx.

  I have one of the devices USB-1208 and discovered very recently this issue when I wanted to use it in a LV 8.5 application I wrote.  The new driver is actually nicer and DAQmx drivers a little resembles the way you use them.  While the former pilots of the Universal Library for older versions of LabVIEW looked like using traditional DAQ hardware drivers of OR.

• Mcc usb 1208FS for labview 10.0 connection problems

  I have version 10.0 of Labview installed on windows XP computer. I want to connect MCC USB 1208FS for Labview. Not able to see the device MCC in device of measurement and Automation Explorer interface. It appears? Please let me know the steps to access the device of the MCC in Labview.

  I can see the MCC card detected in the software InstalCal of MCC supported. I installed the latest version of the CMC the CMC site software.

  As far as I know, you will not be able to see physical computer as in MAX.

  From the file of help from MAX: "Measurement & Automation explore (MAX) allows to access your National
  Instruments of devices and systems. "that is material MCC is not a feature of National Instruments.

  Why not stick with the InstaCal software and the MCC screws provided?

  Ian

• Report Generation toolkit for labview 2010

  H all.

  I'm looking to download the 2010 labview report generation tool. When I proceed to download the Toolkit on the site of the national instrumnets, it says that I need LabVIEW 2011 or later in order to install it.

  Is there a version of this for labview report generation 2010 toollkit and can anyone provide a link maybe?

  Thanks for reading.

  Try this: [link removed, can be found on ni.com/downloads OR software downloads, the LabVIEW Report Generation Toolkit 2010 is available to customers with program Service Standard here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other clients can communicate directly with NOR]

• NOR-DAQmx 9.2.2 for 6251 USB works for labview 8.2?

  Driver download OR-DAQmx 9.2.2 USB 6251 work for labview 8.2?

  Thanks in advance

  NOR-DAQmx 9.1.1 was the last version to officially support LabVIEW 8.2

  NIquist: I'm a student as to why this KB seems to have disappeared in the air.  I can see inside, but not outside.  I'll update the post you linked when I tell me what's wrong.