Tablet Wacom issues? Tablet PC is not reading my tablet.

Similar Questions

• My JournE Touch tablet is not read data on USB

  Hello!

  When I plug my USB stick with games and open it I see nothing, as the Tablet is not read data on usb.
  Can someone help me?

  Guide me a bit.

  Journ.E touch manages and supports SDHC up to 32GB.
  Supported file formats are:

  * Image * JPEG file format
  * Audio * file - MP3, WMA, AAC and WAV format
  * Video * format of file - AVI, MP4, 3GP, FLV and WMV

  Other file formats are not supported.

• external dvd writer dvd1260i & it does not read any cd or dvd

  Mr President, I bought (1260i) writer, external dvd hp with one year in a store approved hp

  now it does not read the cd or dvd & it's within the warranty period. I want to repair or replace the product.

  Mr President, I also went to E-48/4, OIA E-44/2, OKHLA, BUILDING CARDINAL-JASOLA, GARDEN RAJOURI C-4 but they said that "we ddo does not address of office and its peripherals, we repair only portable and tablets.they send me to the other.

  "i.e. okhla jasola, jasola to rajouri garden & new garden rajouri to okhla.

  but nobody has solved my problem.

  so

  Sir please tell me the address of the appropriate service center & contact no.. in delhi & help me solve the problem

  Rajat salhi

  [Personal information]

  Sorry for the delay. I spoke with people in the service center below. Please visit them with the reader and the proof of purchase.

  Jabil Global Services India Pvt Ltd.

  107-A, first floor, cardinal Aurum

  Jasola District Centre, Jasola

  New Delhi 110025

  Contact: 8130496898 / 8130496899 / 8130496896

  Service level: carry - in

  It may take 3-5 days to get the replacement if necessary. Let me know if the issue not resolved.

• My Omni10 can not read sd cards

  The tablet can not read my sd card I tried 2 sd cards and still does not work. This after I updated my Windows. And sometimes due to the sd card my screen freeze and I have to disconnect my sd card in order to get works. I kinda want my Tablet factory reset. Anyone know how?

  @ richardgho: I agree, however, I do not work for HP, so I have no authority in the matter. Despite this, describing results from the troubleshooting steps you have already accomplished should demonstrate that your tablet is defective.

  If you are still in yout seller of trading period, which may be an easier option for you, instead of getting the HP Technical Support to approve a sectoral approach. Whatever it is, you've been sick, so I hope that you won't encounter any hassles even when organizing an Exchange.

  When you are satisfied that this issue is resolved, please indicate your message 'Resolved' to make it easier for others to learn what works for you.

  Good luck!

• CC of Photoshop will not read my pen pressure, but Photoshop Cs6 will be? What is going on?

  I used Photoshop Cs6 in the past and decided to get Phtoshop CC, but it will not read my pen pressure then... I think simply do not pay for CC more... is there a solution to this or is it permanent?

  Thank you! In fact, I realized that my Tablet model is obsolete. I always use bamboo not Intuos. Thank you very much!

• My star bookmark icon does not show my favorites already recorded. My Favorites still exist just unordered, bookmarks section that the star icon does not read the

  Hello. My Bookmark star icon does not read my favorites. I can always use it to record the new bookmarks, but I don't see the 'old'. My Favorites are still there, but the star remains white when I open them and shows them as not saved. Thanks in advance for any help!

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  When the star is to check the Bookmarks Manager, he must control
  all the entries in the file. It could be that the bookmark of the webpage has been deleted.
  Or the sea address have changed. I'm not aware of entries to the
  bookmarks being blocked, unless you have something blocking the changes.

• Cross-origin request blocked: the same political origin does not read the remote resource

  while trying to perform the CORS get request I get this error:
  Cross-origin request blocked: the same political origin does not read the remote resource
  In chrome it works fine.
  I'm using firfox version 29

  A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

• DVD - RW DVR-K17LF for the Satellite series does not read DVD but only to CD

  Hello

  I have a serious problem with my DVD player.
  He stopped to work. I mean, he's not reading CD but not DVD discs.
  I don't know what the problem is.

  I went on the internet and found no solution.

  Please help me.
  It is not a software problem, because my laptop does not start the DVD, but due to the CD...

  Hello

  The issue could be linked to the anomaly of the player's laser lens.
  Maybe the lens can not handle the DVD because of a physical constraint.
  In most cases, the lens can not calibrate properly and therefore different media would not work.
  In this case there is not much to do in most of the cases that the drive needs to be replaced.

  But maybe you could try to clean the drive s laser lens using a cleaning professional who could be bought from the other computer dealers.
  I don't very well if this will help but it s worth to try m

  PS: Try this:
  Remove the drive from Device Manager, access the registry and remove the filters top and bottom of this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop and check the functionality of s by car.

• DVD - RAM on Tecra A2 do not read DVD and CD

  Hello world

  I mast * one DVD-ram UJ-820 s, who do not read my DVD but reads CD. I reinstalled my OS to see changes, even without hope. I burned an operating system on a DVD and try to boot from the DVD and somehow it works, but when it goes to windows it stop reading any disc and shows me that the disc is empty.
  Any suggestions please?

  Did you receive any error messages?

  I searched for tips on the Microsoft Web site and found this two links:
  How to troubleshoot CD-ROM or DVD - ROM read problems
  http://support.Microsoft.com/kb/218617/en-us/

  How to troubleshoot issues with reading CD, CD - R, CD - RW, and DVD discs
  http://support.Microsoft.com/kb/321641/en-us/

  Maybe it helps.
  Otherwise, I think the reader will slowly until the end of life

• Mac Pro can not read SD cards more

  Hello

  I need help with a strong issue with my Mac Pro, who can not read SD cards more. Gluing of any player on any USB, an SD card is not recognized more. Strange also when I put a CF card in the same drive, it works and I can see the CF card on my desk.

  Someone at - it a response?

  (Mac Pro 3.1, latest El Capitan, several players used, same problem)

  What do say to recognize?

  Finder?

  Disk utility?

  System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Have SD readers that you have linked?

  When it is connected with an SD card lists what System Profiler under USB?

  You should see the reader and the card.

• Equium U400 is not reading or burning discs

  My Equium U400 is not reading or burning discs.
  Anyoe can help please?

  Hey,.

  OK, your laptop isn't able to read or burn discs, but does that mean exactly?

  Your drive is listed in Device Manager?
  =>, You can try to remove and restart your laptop.

  Do you see yellow exclamation points in weird Device Manager?
  -Online check the Microsoft Knowledge Base. It s known issue.

  You get an error message if you try Brüning a disc?
  -Online try another program like CD Burner XP burning

  Have you checked the Web from Toshiba site for an update of the firmware?

  What operating system you are using?

  As you can see, a lot of answered no question they would be important in helping you.

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD rom will not read after inserting cd

  my cd rom always worked I had not used it for about 4 months. I tried all my CDs in it will go perfectly, but nothing happens after that it does not read that I have vista Home premium desktop. computer is a dell 2007 suggestions?  Thank you mary

  Hello

  Try this to see if the drive is viable at all.

  / Settings (BIOS/CMOS) often F2 then watch the display as you launch - set initialization
  order on CD/DVD first. Don't forget to when.

  Try to start a Windows Vista repair disc, and or a Linux boot disk.

  If the player does not start to these then it has failed, or other hardware issues
  which affect it. However, even it doesn't start that does not mean that there are not a few possible
  other features of the material problems affect the reader.

  The rest of the message is a response above.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• I installed a new driver for CD/DVD; TSSTcorp CDW/DVD TS - L - 462 was of... CD/DVD Driver.but it does not read empty CD or DVD. It is said that there is no disc in the drive.

  After I install TSSTcorp CDW/DVD TS - L - 462 A ATA device of... CD/DVD drive, I played a cd & he played the cd. After I tried to back up my laptop, I was told to "put a DVD selected", so I did it, but it does not reconise dvd I set, so I put in a blank dvd, & press "use a dvd blank." but he did not read.  It keep saying "install an accessible dvd writable", or "there is no cd or dvd in the drive," what is happening please help.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista not read or recognize no matter what disc I insert - maybe he thinks I'm trying to burn a CD, even if I'm not.

  Vista recognizes the type of disc inserted because the icon change CD, CDR or DVD.  But it will not read the disc.   When I click on the drive in Explorer, it ejects the disc & says "insert a disc.  When I reinsert (any drive) it ejects the disc again & says "insert a disc.

  Hello

  Restart and do not open all programs except as necessary here and try this checklist.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.