CD rom will not read after inserting cd
my cd rom always worked I had not used it for about 4 months. I tried all my CDs in it will go perfectly, but nothing happens after that it does not read that I have vista Home premium desktop. computer is a dell 2007 suggestions? Thank you mary
Hello
Try this to see if the drive is viable at all.
/ Settings (BIOS/CMOS) often F2 then watch the display as you launch - set initialization
order on CD/DVD first. Don't forget to when.
Try to start a Windows Vista repair disc, and or a Linux boot disk.
If the player does not start to these then it has failed, or other hardware issues
which affect it. However, even it doesn't start that does not mean that there are not a few possible
other features of the material problems affect the reader.
The rest of the message is a response above.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
CD/DVD-Rom will not read the CD
I just upgraded from vista to windows 7 Home premium database on my laptop and now my CD-DVD-Rom will not read any CD I put in the drive. He reads that DVD very well so I'm up for a loop now. My drivers are all far better that I can find. I know it's a CD-DVD-Rom, because before I updated I had no problem reading CDs and DVDs. This is a problem because all my anti-virus and other programs are all on CD. I don't know how to fix this. Any suggestions would be greatly appreciated.
-Thank you
Thanks for the post with suggestions. I have tried it all and still had the same problem. I called Dell and got the laptop computer and an hour with a tech restarted my computer and try to fix it, they decided that something in the upgrade process damaged my CDRom and they sent me a new to replace my current one. I'll get it Tuesday and weather post or not, that is the question. Just in case where there are other people out there who might have the same problem.
-Thank you again for your help
-
Optiarc bd rom will not read bluray after upgrade to windows 7
I tried a year ago to find and to address this issue and give it all up. I'm trying again now because it really peaves me that I pay for a product a fork over the extra money just to be able to watch a bluray disc and then when I spend more money to upgrade to windows 7, my driver is no longer recognize blurays. the pilot is optiarc 5500 s, I really hope someone has solved this problem by now, or, worst ever customer service. Help, please.
It is a puzzle game. According to Windows 7 compatibility for this drive, there should be no compatibility issues.
I don't hold much hope that it will help but I would like to remove the device and allow the system to reinstall.
Go to the Control Panel Device Manager. Sanicle unit on the list and uninstall. Reboot the power off. Let the system re - detect and re-install support. Reboot once again and test.
Let us know.
Tom Ferguson
-
CDDVD rom will not read the dvd rom or DVD
my cd/dvdwrighter reads only cd rom not my dvd rom or DVD
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
DVD rom will not read the original (only) dvd.
There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.
There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.
====================================================
If it is a recent issue, it may be worth trying to do
a system restore to an hour before the beginning of the question.Windows 7 system restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsMore info...
The free VLC Media Player may be worth a try...
It will play anything.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player (32-bit Version)
http://www.filehippo.com/download_vlc_32/
(works on XP, Vista, 7, 8)
(the name of the file to download is: vlc - 2.0.7 - win32.exe)(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player (64-bit Version)
http://www.filehippo.com/download_vlc_64/
(works on XP, Vista, 7, 8)
(the name of the file to download is: vlc - 2.0.7 - win64.exe)And the following links may be worth a visit:
(2004673) Windows Media Player cannot
read the DVD because it is not possible to
turn on analog copy on the output protection
view
http://support.Microsoft.com/kb/2004673Windows Media Player cannot play the DVD because it is not
possible to put on the protection against analog copying on the output screen
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167 -
Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd
OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
This cannot be a hardware problem, it must be the software should not it?
Can anyone help?
Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
Unfortunately the computer is just out of warrantyHi Robert,.
Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.
I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.
Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.
Kind regards
-
Original title: Dvd rom problem
Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?
Hello
1. When did you start to question?
2. did you of recent changes on the system?
3. you receive messages or error codes?
You can check the following link and try to run the Fixit and check.
-
Original title: no dvd
I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer
Hi Lesliestones,
· Did you do any change on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Method 2: You can run the fixit and check if it works.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
I hope this helps.
-
My E drive will not read the DVD-RW/DVD-ROM
So here is the problem
I have a vista Home premium 32-bit with sp1 computer laptop
who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfullyI tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
the CD turns, stops, turns, makes a strong ' loading ', but stops then
nothing happenes
I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normallyHelp, please
Hello, tyINtrouble
The device is listed as a DVD player?
You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.
You can also check your connections are secure.
If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.
If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.
We can't wait to hear back on your part.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Optical drive will not read anything else professional films
So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.
I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.
I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.
Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.
I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...
If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?
Good luck
JB
-
Vista PC will not read or play my CD
my pc will not read or play my CD. fix Microsoft Center ran a test and said that the media isn't readable but did not offer a solution. I'm looking for a way to fix it?
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
my pc will not read my cd anymore.i put the cd in the CD and it does not read them.it used to before
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Why my player will not read CD or DVD?
Why will not read my cd rom CD or DVD? whenever I insert a cd or dvd it will not read and I click on computer, double-click dvd player it comes out saying please insert the cd. Thanks in advance for your
Why will not read my cd rom CD or DVD? whenever I insert a cd or dvd it will not read and I click on computer, double-click dvd player it comes out saying please insert the cd. Thanks in advance for your
====================================
The following article might be worth a visit:(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)It is also possible that the CD / DVD drive requires
repaired or replaced. -
Hello.
I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.
The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.
The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA
I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.
Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.
What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?
was soon Dan
Hello
Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily
Completely remove the Upperfilters and Lowerfilters from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
and restart the laptopSee also this article from the Toshiba FAQ:
http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htmand the Microsoft Knowledge base
http://support.Microsoft.com/kb/314060/en-usGood bye
-
Tecra M1 will not read any type of SD card
Help!
According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
I obviously lack something, so any help or pointers are welcome.Thank you very much. Craig
Hello
Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.
But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications
Maybe you are looking for
-
taskbar has changed size - too big - and I can't change it back
my modified taskbar at the bottom right of my screen. When I moved it to the bottom, the taskbar has grown from a single row of icons with windows open applications in the same start line on the right side to basically two lines - senior a start ico
-
Microsoft office client virtualization Manager
Hoi, ik ben René en heb een klein en dat location is: "Elke keer dat ik mijn laptop aanzet zie ik ' microsoft office client virtualization Manager works niet en dat ik maar moet wachten dat er naar een Word gezocht opl. IK squeeze said al een week no
-
Wireless connection: adapter with no signal router
The adapter wireless in my Dell vista basic laptop deoes does not receive signal wireless to my router.
-
BlackBerry Smartphones Blackberry user just a few Questions
First of all, I have the Curve 8330 and it is a totally new gadget for me that I must have lived in the dark ages! In any case what exactly is Facebook? Also, I was wondering if the "BOLD" would be off I'm in my test with the curve of 30 days and lov
-
AACG upgrade 8.6.3.6032 to 8.6.4.7181
HelloWe are in the process of RCMP i.e AACG 8.6.3.6032 upgrade to a higher version of 8.6.4.7181. If you need help of how to perform the upgradeWe're currently on weblogic 10.3.4.0 and according to the guidelines of the matrix of the RCMP the basic v