Take a brush calligraphic, limited choice

Similar Questions

• Brush is limited to 90 ° and as a color sampler tool

  I have a problem with my brush tool because its cursor appears as a color sampler icon and it is limited to 90 or 180 degrees paint (sometimes just 90). Everything was working normally with my last use a day or so there.

  Other facts:

  I downloaded the latest update

  Shift caps lock is not on.

  I am unable to right click in the options bar and reset all the tools

  I'd appreciate any help available. Thank you!

  http://forums.Adobe.com/thread/784569?TSTART=0

• Can limited choice for the Type of paper - I add Types?

  HP Photosmart 5514.  I print on all kinds of media - paper looks, photo paper, wrapped, labels, magnets, etc.  When I go on my page of print properties before each draw, I can choose my Type of paper; However, the list is mainly limited to paper Photo HP and its variations of 8 or 9.  No ads for labels, cardstock, etc.  Can I add these types or what to choose when my type is not listed?

  Annie, check under "Paper handling specifications" for a complete list of the supported paper types. Paper types not listed here are generally not supported because they may cause equipment malfunction if the paper is not through the path of the paper in the correct way.

  http://goo.GL/zuJJq

  The other option might be to try an older driver with a wider range of print capability, here's a post on how to do it on the forum: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alternate-Print-Drivers-in-Different-Versions/td-p/1957011

  I advise to use the Deskjet 9800 990c driver in this case.

  I would like to know if this information helps!

• BlackBerry Smartphones enter e-mail address site - limited choice of symbol

  I need to enter my email address to connect to a website (BT Openzone) but there is only a single page of symbols instead of the usual two, and it does not include the 'at' sign or a full stop (period). Space bar product - well, a space! This could be a bug? Anyone knows a solution please.

  For the symbol @, press ALT (lower left corner of the keyboard) and press the p key.

  For the period, press the SPACEBAR TWICE, or press ALT + M

• Passing a Variable presentation for a 2nd guest in limiting choices

  I want the user to select only one doctor from a single dashboard command prompt, and then I want to pass this value of doctor (let's call it "PV_Doc") to 3 different datafields in the query:
  Primary care physician
  Surgeon
  Doctor's referral
  
  The query will return the patients for which the chosen doctor was listed as on or more of these 3 areas using a statement like gold in the filter... like:
  Primary care physician = @PV_Doc OR
  Surgeon = @PV_Doc OR
  Referring physician = @PV_Doc
  
  The problem I have is that the list of unique doctors is about 5 000 entries. What I want to do instead is to have the maximum number of users results in a table edge invited by entering a value like 'Smith' and then in the 2nd dash prompt only show 40 entries of the 5,000 that contain this text string, by usign the box "constrain".
  
  I can't do thpugh because in order to limit the 'Show' the 2nd prompt values requires that I do a SQL statement that says Doactor is like % @ % PV_Doc, but using a SQL statement, I can't assign the value they choose in a new variable of presentation.
  
  Any ideas? How to make it easy for the user to select a doctor and then passing a variable presentation so I can pass it to all fields of 3 doctor in the filter?

  Use the dashboard separated guests, not constrain option between fields in the same dashboard prompt.

  1. make the first dashboard invites with a field only and put it in the first section:
  column to change the formula: '1'
  control: edit box
  variable of the set of presentation: pv_name_like

  2. make second dash invites with a field only and put it in the section two:
  column to change the formula: YOUR_TABLE. DOCTOR_NAME_COLUMN
  control: in the drop-down list

  SQL results:
  SELECT YOUR_TABLE. DOCTOR_NAME_COLUMN
  "Your CATALOGUE presentation".
  WHERE
  YOUR_TABLE. DOCTOR_NAME_COLUMN '%' |' @{pv_name_like}' | ' %'
  AND RCOMPTE (YOUR_TABLE. DOCTOR_NAME_COLUMN)<>

  variable of the set of presentation: pv_doctor

  3. make sure guided navigation report for the dash prompt in section two (point 2) to show only in pv_name_like is not null, or length('@{pv_name_like}') > 0.

  4. make or update your target destination to trigger only when the second GO touch (when the variable pv_doctor of presentation is filled). Put it on Chapter 3. You can resolve report hide-with navigation guided in Chapter 3 report.

  5. as the reference see this:
  http://108obiee.blogspot.com/search/label/guided%20NAVIGATION

  Initially, you see only the first line (edit field, name) and when you click on GO the second prompt appears with the filtered values. After you click on the second GO report is displayed.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.

• Step.Limits Set with ActiveX

  Hello

  I work on the development of a VI to create a TestStand sequence based on a set of inputs to an excel file.

  With LabVIEW, I was able to create a new file of sequence and insert a test "LabVIEW digital limit" in the sequence (VI attached for adding new digital step). I don't know how to take this additional numerical limits and put 'Step.Limits.Low' & 'Step.Limits.High '.

  Grateful if someone can let me know if/how this is possible.

  Thank you best regards &,.

  Don1

  PS: Please advise if I should have posted this on the set of LabVIEW.

  With the help of the reference step change for a reference of PropertyObject (Step.AsPropertyObject), then you can change the default values using the PropertyObject.SetValNumber using the search string for "Limits.Low" and "Limits.High".

• Limited number of app in the store

  I use a full update preloaded Windows 8 pro 64-bit on a touch of carbon lenovo x 1
  with full access to all my account settings.
   
  I get only showed a limited number of app in the store. for example, only 3 in the category economy and two in the health and training, etc.?
  By changing the language in the Control Panel, for example English of the United States, can I have access to many applications, but so can I change the language in my Outlook calendar, for example, also
  How to display all the apps in the store without changing the language in the control panel?

  You would replace your location in the control panel settings to access the applications not available in your area... If your current region has a limited choice of applications, these applications are simply not available for this region (defined by the developer/publisher

  Remember that you can only make App purchases for the region as your method of payment/preferences(located in your Microsoft Account billing), then change your local area on your PC, you will be able to install free applications

• Can't paint, "with brush" inside the selection after a STROKE.

  on an empty layer "layer 1", I've created an oval using selection tool elliptical that go to edit stroke. I caress with a black brush of 2 pixels. If I go back to the layer and ctrl-click, PS puts Mobile dotted around him that designate this option is selected. However, if I take a brush and try to paint inside I can't on the layer, "in or out of the selection", unless I have clear. Goes against everything I've learned so far on selections. Any help is appreciated.

  Try and get used to the use of many layers.  For example, the layers panel below shows that the top layer contains a Red Cross, but it is visible that where it overlaps the black circle because the layers are "clipped" together.

  

  To do this, place the cursor on the line between the layers and hold down the ALT (Opt) and click.  You will see the icon displayed below (I made larger than life for clarity) and the top layer will become indented with the tiny arrow facing downwards.

  

  You can also "clip" adjustment layers so that they affect only the layer that they are cut.  It is such a fundamental tool, there is an icon at the bottom of the Panel property of the adjustment layer (highlighted in red below.

  

  There are many ways of doing things with Photoshop.  For example, the same effect with the Red Cross and the black circle with the help of a layer mask.  CTRL click on the layer with this selection and black circle to load the selection in place, add an adjustment layer to the layer of the Red Cross.

  

  Perhaps the only thing more fundamental to the use of Photoshop that what precedes, control selections, but do not all learn in one day.

• Lag on the brush strokes - Photoshop CC 2014

  Hello

  I tried with a Wacom tablet and even a MagicMouse and the problem is exactly the same. If I take a brush and a draw by lot, for example, consecutive hits, each line gets more offset than the previous, do a quick sketch tedious and overwhelming.

  It can be the cause of this shift of race? I tried to remove the acceleration graphics and even using native brushes, rather than custom, but the problem persists.

  I use Mac OSX with Yosemite and Photoshop CC 2014.2.2

  Any help?

  Thanks in advance

  https://forums.Adobe.com/search.jspa?place=%2Fplaces%2F1413024&sort=updatedDesc&q=Mac+Waco m + Lag

• limited resources questions

  The following instructions are correct please?

  -When the resource_limits parameter is set to FALSE in the initialization parameter file, used by each user PROFILE is regardless of the value of the PROFILE is on in dba_users?

  -When the resource_limit parameter is set to TRUE, it is same as above?

  -If the above two statements are true, what then is the purpose to set resource_limits to TRUE in order to change a parameter of dba_profiles resource?

  -What are the implications of implementing resource_limit = true?

  -When the LIMIT value in dba_profiles = 'DEFAULT' for a given resource, the real value is probably all that is defined in the 'DEFAULT' PROFILE to this resource?

  Thank you

  The DBA_USERS PROFILE is always the user profile if resource_limit is set to TRUE FALSE.  The definition of resource_limit false indicates Oracle to ignore the limits of resources defined in this profile.  The user still has the profile and the profile still affects other resources limit things (i.e., password lives and others), but Oracle does not take into account resource limits defined in the profile.  If you set to true resource_limit, Oracle imposes limits of resources defined in the user profile.

  Yes, when a profile setting is set by DEFAULT, it means that it inherits the setting from the default profile.

  Justin

• What brush I used?

  I find the brush very confusing organization. I have a photo to illustrate here (CS5) and some brushes numbered issues (numbered so that they can be more easily processed).

  (1) Let's say I start using a brush, then three brushes later, I want to use this first brush again. Is it possible to find if you don't remember what it was?

  

  (2) how do you know what predefined list of brush you use yet? It does not appear anywhere on the screen? (Assortment of brushes, calligraphic brushes, etc.) I don't see anywhere.

  (3) is it possible to rename brushes in a predefined list? All brushes are named right (I guess) for their digital size. Sometimes, there are several with the same digital name in a preset. If I use #60 in the calligraphic brush preset frequently, I renamed it 'Favorites' so I can find it faster? If so, how?

  4) related to question 3, I can pick up brushes favorite of several different lists predefined and form a new preset with these brushes that I use most often? If so, how?

  Virtual machine of chocolate to anyone who answers. Thanks in advance.

  You can rename all kinds of presets under Edit--> Preset Manager. Presets can be merged / attached by simply loading the corresponding files in the flyout, but naturally, different types of brushes will be always separated since for example mixer brushes simply to work completely different compared to conventional brooms. You can set brush different display modes found in the drop down palette preset, including various combos with trext, so if you name your protect brushes you can keep the lines in this way.

  Myleniuum

• LR 3.2 keyword delete problem with brush tool

  I can't delete any keyword with the Brush tool. The brush icon wasn't rubber icon changing when I take the brush with a keyword exist on a photo in the grid.

  Uwe

  New behavior in Lr3, hold down the Alt/Option key.

• How to create a collection of brushes?

  Hi guys.
  even if im not new to photoshop, I am new to brushes.

  I have a list of many brushes, but also of many brushes collection (ABR files) and I know how to create brushes from scratch.

  what I don't know how to do, it's how can I take a brush to a brush collection (a single ABR) andadd to another collection of brush.
  and if I don't have this big list of brushes (more than 50 brushes that I have loaded some ABR files) that how can I arrange them in a comfortable control

  Among the dozens of brushes I there are many I don't want (I know I can delete any specific brush) but I don't know how can I change the order of the brushes so that it will be comfortable for me to browes them.

  is this even possible in photoshop CS (which im using)?

  Thank you

  You can use Edit-> Preset Manager

• Satellite A100 - 003 (PSAARE) - disk HARD help upgrade

  Hello

  I have a Satellite A100-003 (PSAARE) Windows 7 Home Premium 32 - bit installed and 3 GB of RAM 667 MHz.
  I want to spend my hard drive. But I don't know which model is most suitable for my computer.

  There are two options: 7200 rpm or 5400 RPM HARD drive.
  What are the advantages and disadvantages of this type of hard drives?

  If I buy a 7200 RPM HARD drive, do I have a problem with the heat and noise?
  If you can give me some names of HARD drive model that you suggest, it will be better for me.

  Thank you.

  > There are two options: 7200 rpm or 5400 RPM HARD drive.
  > What are the advantages and disadvantages of this type of hard drives?
  The 7200 RPM drive is faster than the or 5400 RPM HARD drive. This allows read and write faster data on the HARD drive, but to be honest; in most cases, this difference is not noticeable

  > If I buy a 7200 RPM HARD drive, do I have a problem with the heat and noise?
  No, normally you should not get any problem the two type of HARD drive are compatible with laptops

  > If you can give me some names of HARD drive model that you suggest, it will be better for me.
  To be honest, you can use any HARD SATA 2.5 drive. The SATA controller is not limited to a capacity of HARD drive that you can take any disk of your choice