Taking a long time to power laptop

Similar Questions

• V10.11.3 OSX El Capitan taking a long time to open

  Why after update to OSX El Capitan v10.11.3 its taking a long time to open?

  Do you mean that it takes a lot of time for your computer to boot?  There could be several reasons for this.  Start by going to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  It goes we will see what is currently on your system, and if there is something on this issue causing the extreme slowness of start-up, we see and advise you on what to do next.

• I have tried, using the, trial version, creative, cloud, I, signed, until and started, the, download, download, is taking a long time, so, I, decided to cancel, she and buy, year, plan, pay, mont hly., I, started, download, creative, cloud, once again, bu

  I, tried, using the, trial version, creative, cloud, I, signed, until and started, the, download, download, is taking a long time, so, I, decided to cancel, she and buy, year, plan, pay, mont hly., I, started, download, creative, cloud, once again, but, downloading, was interrupted, by, ma, firefighters dau, by inserting, key usb, peripheral, in , the, USB port. , Could, not, I believe, downloading, I, signed, in, adobe, and now, tells me, that I, a, 30, day, trial, My, account, shows, that I have, I, p helps, my, first of all, every month, slice, but, I can only use a, trial, version, who, says, goes, e arentheses, 30, days., which can, I, do, for, get, the full, each year, the intention, version?

  Jacobm51486856 please see in Sign, activation or connection errors. CS5.5 and later for more information on how to resolve the error of connection that prevents your membership being authorized.

• MacBook Pro (13-inch, late 2011) taking a long time to start

  Hey everybody,

  I have a Macbook Pro (13 inch, late 2011), which takes a long time so that it starts about 1 min. This should automatically start since I have an SSD. Right? Specs are below:

  2.4 Ghz Intel Core i5 processor

  8GB memory

  Boot disk (my hard drive name)

  Intel HD Graphics 3000 512 MB graphics

  500GB Solid State hard drive

  I reboot mac, remove all items from the startup items, reset the SMC. What else is there to do?

  You have installed TRIM?

  Ciao.

• Executions of dynamic query taking a long time

  Dear all,

  During the race the query below, it takes a long time to execute.

  [code]

  DECLARE

  statement varchar2 (1000);

  BEGIN

  FOR c1 IN (SELECT tenant_id FROM tenant WHERE tenant_id! = 0)

  LOOP

  FOR c2 IN (SELECT alignment_id FROM customer_alignment WHERE affiliation_id IS NULL AND tenant_id = c1.tenant_id)

  LOOP

  FOR c3 IN (SELECT vw.affiliation_id, vw.customer_id, vw.alignment_id, ca.customer_alignment_id

  OF ca_primary_address_vw vw, ca customer_alignment, WHERE ca.affiliation_id IS NULL

  AND ca.alignment_id = c2.alignment_id

  AND ca.customer_id = vw.customer_id

  AND ca.alignment_id = vw.alignment_id

  )

  LOOP

  Statement: = "UPDATE customer_alignment SET affiliation_id ='|" C3.affiliation_id | |' where customer_alignment_id =' | C3.customer_alignment_id;

  execute immediate (statement);

  END LOOP;

  END LOOP;

  END LOOP;

  END;

  [/ code]

  Can you please help me on this issue.

  I use the version of Oracle 11 g.

  Thanks a lot for your help.

  Miriam.

  Never perform a treatment by data line. SET the computer base. Direct use of the joints and cut single SQL. Your condition can be obtained by using the merge statement.

  merge into customer_alignment c
  using (
          select vw.affiliation_id
               , ca.customer_alignment_id
            from customer_alignment c
            join tenant t
              on t.tenent_id       = c.tenent_id
             and t.tenent_id       != 0
             and c.affiliation_id is null
            join customer_alignment ca
              on ca.alignment_id  = c.alignment_id
             and ca.affiliation_id is null
            join ca_primary_address_vw vw
              on ca.customer_id   = vw.customer_id
             and ca.alignment_id  = vw.alignment_id
        ) t
     on (
           c.customer_alignment_id = t.customer_alignment_id
        )
   when matched then
   update
      set c.affiliation_id = t.affiliation_id;
  

• Query taking a long time to run

  Hello
  
  I have a query that takes a long time to run. There are 191 000 records. This is static data only. This is the query.
  
  
  SELECT X_FIRST_NAME,
  X_LAST_NAME,
  X_MIDDLE_NAME,
  X_MEMBERSHIP_ID,
  X_ASSOCIATE_ID,
  X_MEMBER_KY,
  X_MEMBER_EXP_DATE,
  X_JOIN_CLUB_DATE,
  X_MEMBERSHIP_KY,
  X_ADDRESS1,
  X_ADDRESS2,
  X_CITY,
  X_STATE,
  X_ZIP,
  X_DELIVERY_ROUTE
  
  OF Canceled_Customers S
  WHERE THERE ARE
  (SELECT 'Y' FROM Canceled_Customers WHERE)
  (By SELECTING COUNT (P.X_MEMBERSHIP_KY) IN Canceled_Customers P)
  WHERE P.X_ADDRESS1 = S.X_ADDRESS1
  AND P.X_ADDRESS2 = S.X_ADDRESS2
  AND P.X_CITY = S.X_CITY
  AND P.X_STATE = S.X_STATE
  (AND P.X_ZIP = S.X_ZIP) > 1);
  
  
  Thank you
  
  Kelly

  Kelly wrote:
  I'm trying to capture duplicates. However, only the address information will be duplicated.

  For example:

  There might be a Jody Smith and Tim Smith with different Membership_Ky with the same address. I need to find these documents.

  Hi Kelly,

  Then you can try this statement instead, which uses only a full table on your table scan:

  select x_first_name
       , x_last_name
       , x_middle_name
       , x_membership_id
       , x_associate_id
       , x_member_ky
       , x_member_exp_date
       , x_join_club_date
       , x_membership_ky
       , x_address1
       , x_address2
       , x_city
       , x_state
       , x_zip
       , x_delivery_route
    from ( select x_first_name
                , x_last_name
                , x_middle_name
                , x_membership_id
                , x_associate_id
                , x_member_ky
                , x_member_exp_date
                , x_join_club_date
                , x_membership_ky
                , x_address1
                , x_address2
                , x_city
                , x_state
                , x_zip
                , x_delivery_route
                , count(*) over (partition by x_address1, x_address2, x_city, x_state, x_zip) cnt
             from canceled_customers
         )
   where cnt > 1
  

  Note: not tested.

  Kind regards
  Rob.

• WANT to m6: Windows Update taking a long time

  My laptop recently had an update waiting for a 'new feature windows 10', I decided to update by clicking on update and close. Once that the screen says of things such as the update of preparation and installation of update.
  Then a black screen pops up and had a white buffering the symbol on the bottom, similar to the start, but without the hp logo screen. Since the update, my laptop has slept on this screen for about 30 hours now, with the buffering continuous symbol.
  Is this normal? Is there a possible way to speed up the process?

  Hi@Jaysonic,

  Welcome HP forums . The best place for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Stuck Windows Update. Is this fair?

  I will definitely help you.

  Try to restart the PC once and see if that starts the process of update quickly.

  Let me know to learn more.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click "Accept as Solution" if you feel my post solved your problem, it will help others find the solution.
  Click on ' Bravo Thumbs Up ' to say 'Thank you' to help!

• Recycle Bin taking a long time to display confirm delete

  Then, when I right click > Recycle Bin empty, I could 5 to 15 seconds for the confirmation dialog to appear before allowing me to delete what was there, even if it is a single file.

  If I open the trash, it can also take some time to load.

  It seems windows knows how many files, the discrepancy between the loading of confirmation is reduced to normal.

  I have the latest Windows.

  RESOLVED:

  It turns out my hunch was right, I did a few tests every few hours.
  Whenever I had my on and not running outside, he crawls.
  Whenever I had my cut outside or not unplugged, no lag.

  I guess that's just something with the way windows checks the files to delete because he wanted to check if my outside was marked for deletion, even if there are no files. It would be nice if Microsoft should fix this but it's not exactly high priority.

  I wouldn't have spotted this problem without going through everything in the response but thanks for your efforts!

  Have a good day.

  Hello

  Programs such as Norton, McAfee and others can monitor or affect the trash
  so to use the clean boot method to see if there is something in the appearance of starting the
  issue. Use the rest of the troubleshooter if necessary.

  ================================================================

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Windows 7 taking a long time to connect to the wireless network

  When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

  Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

• Query taking a long time to 12 c

  Dear all,

  We have a query that returns no output in 12 c. but same query gives output with in 2 seconds in the Database 11 g.

  Select a.id_place as id_place1, b.id_place as id_place2, minors (a.id_place) as minors1, minors (b.id_place) as ss_city_place_temp1 minors2 an inner join b on b.id_place_name ss_city_place_temp1 = a.id_place_name and b.id_place! = a.id_place and b.fl_active = a.fl_active and b.id_low_nbr = a.id_low_nbr and b.id_high_nbr = a.id_high_nbr and b.id_useing_area = a.id_useing_area and b.cd_side = a.cd_side and b.id_sub_ City = a.id_sub_city where a.id_city = 84 and a.fl_active = 'Y' order of a.id_place_name, a.cd_side, a.id_low_nbr, a.id_place;

  If I remove the order by cluase, its giving out in 12 c.

  I collected stats for the table. but no use.

  compared to 11 g, 12 c has more SGA.

  Please help me find the problem.

  Thank you and best regards,

  REDA

  problem solved,

  I think that his bug in 12 c,.

  After you change the settingoptimizer_features_enable='11.2.0.3' , its working fine.

  Thank you

  REDA

• Windows 7 takes a long time to load the desktop after login

  Hello

  I am using windows 7 on my HP 530 laptop. My friend who installed and activated, but I think that it has installed the cracked version. After installation, it was really perfect. but after a while when I connected to the internet, some updates have been installed, and then when I logged in the windows, he invites me that you are using a pirated version or something like that (I don't know more actually). then I restored to my previous state and then everything was fine. After that I stopped the automatic updates, but these days my startup window is having a few problems. After entering the password, its taking a long time to load the office and its keep on the list "loading, please wait...". »

  I'm so sick of that, also, I have to restart my laptop by pressing the power button, and after the reboot, it works fine. But I need someone to answerwhy its taking a long time to load the desktop...?

  Also, please give me some advice to solve this problem, keep this idea in mind that my computer is virus free and got a good processor and RAM. I installed my windows in the C drive, and in my C drive only almost 2 GB of space is left (or almost). and there is no program running auto in msconfig, other than gtalk, Skype, etc.

  I'll be really grateful if someone please give me the solution.

  HP would have provided your preinstalled laptop with win, they would also have provided a way to recover your laptop to the specifications of the factory, either through discs of recovery or a hidden restore partition that you need to access in order to make recovery disks. How do you access a recovery partition is an option of HP, is not dealing with a MS - visit the HP website, specific to your model for more details on how.

  If an illegal win7 version has been installed, or you have to buy version of win7 you need, or you need to recover your laptop provided that the factory provided, by doing so, you lose everything on the phone, if you have lost or that you can not do the restore cd and then telephone HP support they would usually provide records for a small fee.

• The update takes a long time

  Hi we have a customer_status of the table where we have the following columns such as contacted_date and status

  Under certain conditions, it will read all lines and update the data

  as the customer_status UPDATE

  SET contacted_date = < some_date >

  When status = 0 and contacted_date is set to null

  It's taking a long time and have hanged...

  Please let me know what I need to check in what concerns the DB from Redolog setting or any other setting that I am basically a developer all

  The current version of the DB is:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  CUSTOMER_STATUS

  CONTACTED_DATE TIMESTAMP

  STATUS NVARCHAR (1)

  Any suggestions would be much appreciated.

  I've seen this kind of problem before and there is no simple answer.  You are better off watching a redesign, otherwise, you will have to resort to brute force tactics to improve performance.  And even then the best you can do is still very limited.

  If you have a table "customer_status" with a "status" column that has probably only 2-0 and 1 values.  This means that the optimizer will believe, in the absence of all histograms for each value to roughly half of the rows in the corresponding table.  Think about it, it makes sense.  In turn, that means that the optimizer is more likely to choose a full table scan to run the UPDATE.  In turn, which means that as time passes and the table grows then the update becomes slower and slower every time that it is executed.

  Solution?  A redesign.  Really, it's the "best solution".  Otherwise you still go to the fight against the problem that the "Status" column has only 2 values in it and Oracle can assume that half of the lines end with each value.  With these statistics, the optimizer will always choose a full as table scan being the cost lowest and as the table grows so the update is slower.

  You can try to create an index on the status and contacted_date on customer_status (status, contacted_date).  But that works only if the "status" has a NOT NULL constraint on it, which does not appear in your column definitions.  Without that the index would be always useless and Oracle would still do a full table scan.

  You would also go the questions that your query uses a 0, which is a NUMBER, but the definition of the column is of type NVARCHAR and Oracle will add an implicit conversion around the column to convert number in the execution of the query, which again once stops using the index on two columns.  Data types must match for an index to use.

  You could create a histogram of frequencies located on the 'Status' column so that the optimizer has more precise statistics.  But this can depend on when in the day, the table statistics are collected.

  These tables tend to be very dynamic with data changing in their breast. How many lines in this table?  Are all deleted?  Or they stay there forever?  How many times does change the status value?  Or it fixed once and stay the same forever?

  I've seen problems of treatment of systems with a table of 'work' with a "status" column on work, and depending on what time of the day, statistics were collected from this table, it could have vastly different numbers of lines in there and a different number of lines with different values for the 'status '.  Ultimately we did an overhaul and separate tables used - one for in the expectation of work - and one for completed tasks that kept the data sets smaller and meant that the table 'pending' only pending works in.

  John

• Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But i

  Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.

  If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.

  As a fundamental step. Leave the creative Cloud desktop application.

  Delete the contents of the Temp folder:

  Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.

  Please press Windows + R and you will get a command window run, get hit and type %temp%.

  Delete all the content inside the temp folder.

  
  

  
  Then try again to install application InDesign CC again.

  Just in case, if you are still having the same issue.

  Creative application cloud thus released, do not close it.

  Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.

  Then leave Creative Cloud application and try to install.

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• computer Dell laptop under Vista Home Basic are taking too long to wake up from its sleep. __

  computer Dell laptop under Vista Home Basic are taking too long to wake up from its sleep.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner