Tandberg Codian MSE supervisor - continues to lose network response

Similar Questions

• TimeCapsule loses network connection

  I have a TimeCapsule (new version of turn 2014) and I noticed that my backups are not being every hour. Utility app showed 'device not found' on the network.  I restarted the time capsule - it connects to the network successfully for about 3 minutes and then "Device Not Found".  I restarted my TimeWarner cable modem then restarted TC even question.  My wifi router is the TimeWarner modem and I have 60MB of speed that I'm guaranteed up to 50MB, so all right from the internet side.

  I did a soft reset... same question.  I did a hard reset and used the previous settings - same issue (3 minutes network, and then click device not found a few moments later).  I guess I can do a default network but since absolutely no changes to the network settings have work probably months (7 + months) I don't see why this would happen.  I don't want to lose my entire backup (s) risk is... I have no other way to save my December 2015 MBP.  * Funny, it is the TC network shows, if I hit him "save now" finds TC but TC for 3 minutes then turns off network; However, the backup actually occurs successfully. But will not back up again until I restart then the TC on the network these 2-3 minutes before losing the connection.  Help.

  I have a MBP 15 mid-2015 "and capital El v10.11.6.  My TC etc are all up to date on the versions of software too!

  Many users have posted on the forum with the same number of "Device not found" in the last days. Looks like almost every new post is about it. This is one of a few minutes there are, for example:

  TimeCapsule loses network connection

  Rumor has it that the 10.11.6 recent update is part or all of the problem, according to the opinion.

  The "fix" of the day is to disable Back to My Mac in AirPort Utility, that seems to work for users who have helped with my Mac. Of course, you lose functionality when you do this.

  No solution yet for users who do not use Back to My Mac, because they cannot turn off something they did not.

  Apple is silent, not so much we can do until Apple recognizes that there is a problem (which they are not since yesterday when I spoke to them).

  Stay tuned.

• Satellite C660 continues to lose its wireless connection

  Hello

  We bought the laptop above for our son for Christmas and he continues to lose its wireless connection, we also have a satellite L450 that works well (not to lose the internet connection), we were on our broadband provider that they told us that the wireless connection on our other laptop is fine It's something to do with the C660, one of the pilots is in need of an update, unfortunately I forgot the name of the driver, but it's something to do with the modem, our son is desperate to use his laptop.

  Can anyone help?

  Try it please update driver WLAN.
  Latest version, you can find the portal of Toshiba WLAN > http://aps2.toshiba-tro.de/wlan/

  If you n t know that you need please exact notebook model poster or the name of the template for laptop.
  This info, you will find at the bottom of the thumbnail of Toshiba.

• 6700 hp officejet premium continues to lose its wireless connection

  My 6700 hp officejet premium continues to lose its wireless connection.  I have to restart the computer to restore the connection.  What causes the lost connection & how to fix it?

  Hi radensu3,

  To what extent is the router of the printer?

  What is the operating system on your computer?

  Launch the firmware according to here

• Registration of network response

  Hi again,

  my application hates me! Next problem: save a network response. Finally, I managed to recover a pdf via QNetworkRequest and therefore now try to save the file with the following function:

  void ApplicationUI::pdfFinished(QNetworkReply *reply)
  {
      if(reply->error()!=0)
      {
          qDebug() << "# Error: Request!";
      }
      else
      {
          qDebug() << "PDF loaded!";
  
          // Zielpfad
          QString fn      = "tmp.pdf";
          QString path    = QDir::currentPath() + "/data/downloads/";
  
          QString url     = path + fn;
  
          QFile pdfFile(url);
  
          if(pdfFile.open(QIODevice::WriteOnly | QIODevice::Unbuffered))
          {
              qDebug() << "# PDF saved!";
              pdfFile.write(reply->readAll());
              pdfFile.flush();
              pdfFile.close();
          }
          else
          { qDebug() << "# Error: File!"; }
      }
  }
  

  I get the ' # PDF saved! Message, then I guess I could create the file but when I open the file manager of BB to look for, there is nothing in ' / downloads ", not even a file corrupted.

  My Question: Did you really saved the file and when-> WHERE IT IS?

  Maybe the directory does not exist?

  QDir dir;
  dir.setPath(filePath);
  if (!dir.exists()) {
      dir.mkpath(filePath);
  }
  

  You can also check the write with qDebug function, it returns the size of the bytes written.

  Another option to check the created file is

  QFileInfo fileInfo(file);
  

• laptop continues to lose wireless networks requires restart to work again

  My latitude D630 dell with windows xp will randomly lose all wireless networks. It takes a reboot for it once again, but then only works for a little while until she randomly loses connections again. I tried to disable the firewall, but that can help didin't. Please notify

  Hello JaunitoHortoni,

  What service pack Windows XP do you currently use?
  You can check this by clicking on 'my computer' and selecting Properties. A box will appear showing your Windows Version and Service Pack (if any)
  If you are not running Windows XP Service Pack 3, then I suggest download and install it to see if it solves your problems Wireless:
  http://support.Microsoft.com/kb/322389

• HP1102w continues to lose the network SSID

  My Laserjet 1102w wireless worked fine for about a year.  Now he has started to lose my network connection.  When I print a status page, it shows that it is "connected" to SSID HP8AA7DC, which I assume is the default value of HP, and had no IP address.  I re-installed the printer 3 times in 4 days and it works fine for a day, then the same thing happens.  I am running Windows 7.  To my knowledge, nothing has changed recently other than to have an extra laptop using the network (never printed however).  This could be the cause?

  OK, thanks for that.  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address.  Set the IP Address of the printer to the same as its IP address but replace the latest figures with "250".
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Vista continues to lose a network printer

  I have a computer with Vista home premium (32 bit) networked through a router to a printer (Epson DX4400) on a second computer running Windows 7 Professional (64 bit).

  The network seems to work fine, I can see and access shared folders on the other machine), but whenever the vista computer is restarted the printer must be reinstalled on the subject from scratch. The computer can still not see the printer through the Add Printer Wizard and I have to use the "printer not listed option" in the wizard.

  Someone at - it ideas?

  Thank you.

  Hey MarkMc

  Step 1

  I first suggest you to uninstall the drivers and connect the printer locally on the Windows Vista-based computer. Then install the drivers and check if it works fine after restarting the computer. If the connection is intact and if the printer is visible after restarting the computer, you can connect to Windows 7 computer and reinstall network site Web Epson printer drivers.

  Step 2

  Access the link below and download the latest drivers for your printer and install and check if it helps.

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=lkuCfcvA9czYMwB+2i0olQuJG2hW2FWdwbHRlVgU002Fu18U003D&TC=6

  Step 3

  You can remove or remove all the other printer installed on your Windows Vista computer and reinstall the drivers for your Epson DX 4400 and check if it helps.

  Step 4

  Check if you have any firewall is enabled on your router and try to temporarily disable the firewall of the router and check if that helps you solve the problem. If it works fine after you turn off the firewall, you can contact the router manufacturer to check if you need to change the settings of the router. Later, re-enable the firewall after verification.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Airport Extreme intermittently lose network signal

  For several days, I repeatedly lose my network signal.  I spent an excessive amount of time troubleshooting including going so far as to have a comcast tech come by today, but it's a bit like going to the doctor... When the doctor walks in the room, all of a sudden all the symptoms disappear.  Anyway, has dropped signal, network cannot be found, restart the modem and the router on a regular basis.  some time, restart allows the devices to the network.  Sometimes it doesn't.  And when that happens, it is not compliant and will lower it again anywhere from immediately or several hours later.  Comcast claims signal input in an apartment is good as well as the modem is good.  They think it is my Apple Extreme router.  However, the same missing network behavior occurred even when I bypassed the router and used a direct connection to the modem via ethernet.  For example, if the signal coming from the wall is good and the modem is good but I have the same problems even if without going through the airport, what happens?  Hope that someone out there more knowledgeable and patient I can sort this out.  I am happy to buy new hardware but want to be sure, that I need.  Comcast, recommended, of course, I get a new modem.  Motorola, of course, said that there is nothing wrong with the modem.  So now, I go to the Apple people to evaluate the remaining product that is Apple.  Thank you.

  However, the same missing network behavior occurred even when I bypassed the router and used a direct connection to the modem via ethernet.

  Is your modem or ISP...

  The problem occurs intermittently... the curse of living in any repair technician. If they can see what is happening, then they can work on that.

  You have no choice but to continue to pursue to the ISP.

  For now use mac plugged directly on the modem... and as soon as he left the ring and say that it does not work now.

  This modem do you have?

  Certainly, we have experienced problems with the Modem Motorola... SB6141 is the top of the list.

  The problem with the airport is well known... but I would have thought that the live Mac should be ok...

  In any case a new modem is not expensive and worth it.

  The zoom seems the best solution... check that it is on the list of comcast.

  Zoom modem.

  https://discussions.Apple.com/thread/7360161

  https://discussions.Apple.com/thread/7427491

• Satellite L875D - 106 internet continues to lose connection

  Hi all

  I recently got a Toshiba-brand new laptop, but I have problems with the internet. It connects fine, but he will often lose the connection, and then reconnect again. It usually falls just for a few seconds and when I'm just browsing, and if it's not really that much of an issue, but I also play on this computer, and it's a real problem for me because I keep late because of the loss of the internet and/or abandonment.

  I have a suspicion that this is due to a freezing of the computer gets sometimes, which is very noticeable while watching a movie or listening to music. It freezes for about 1 second and then continues on his business after that.

  When I'm at home I use a cable to get internet i live in a student House, so that we don't have to speak right to have wireless, but it's also goes to school where there is wireless connections. I have not had any problems with the internet connection when using my previous laptop, and my boyfriend (we share the apartment) has a fixed + laptop which work fine with the same switch for internet.

  Really hope you can help me!

  Thank you DBOBA for sharing your experience here in the community.

  You're right: change the WLan PCI power settings in Windows Advanced Power Options can help avoid these annoying wifi disconnections.

• Apple TV loses network connection

  Why my Apple TV loses its network connection? Each article I found said it's your network... It is not my network. I have 4 other Apple TV on my network of 5 ghz and they work great. I've seen articles that say it is the signal of my AirPort Extreme. It is not the case... As I said previously I have 4 other Apple TV scattered throughout the House and Apple TV that has the problem is sitting right next to the AirPort Extreme. All 5 Apple TV are Gen 3 and the updated version. So is there anything else I can try before buying a new Apple TV?

  Other devices work does not have a network problem.

  You can get a report ffrom istumbler, netstumbler or similar to see a current state of the network. This will give you the strength of the precise signal, noise, networks nearby. With the help of Ethernet will also check. You can also test it on another network

• Photosmart 7520: Photosmart 7520 loses network connection once he spends in standby mode.

  Printer is not in the network once he spends in standby mode. Only works after I have unplug and plug printer back in.

  Hi @tilliegirl

  I understand that you're having trouble with your Photosmart 7520. When the printer goes into sleep mode it loses the connection to the network.

  This document contains information on the possible causes of an interruption of the connection wireless, tips to avoid the question, tips to maintain a connection and troubleshooting to help you re-establish the connection Wireless on your printer; The printer keeps Wi-Fi connection.

  In addition to the solutions proposed in the document and you've probably already tried, please make sure that the printer is connected directly to a wall outlet, not a surge protector / power bar. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

• Connection to printer VISTA continues to lose

  OK, simple problem: I have a week old Dell PC with VISTA Business. It is connected to a printer on the Office Server, but every day it loses the connection, and THE only way to reconnect is to remove the printer and re-install. We now have 2 Dell PCs with VISTA that I have this problem. All other PCs are XP and there is no problem with these. This HAS to be a common problem - I'm the thqat one person think Windows updates should take care of this? Is not the kind of requirement very basic that Windows updates is designed for?

  Hey viacom,.

  It sounds like this is a problem quite complicate you have on your hand.  Normally, we do not support server network here, but you will need to go to Technet.  In your case, I suggest to look for local professional help or call Support technique Microsoft for the distance to take a look.  Problem is too big to fix in a forum.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry 9900 Smartphones lose network

  periodically, I lose the network connection for periods of days. Replaced the SIM and battery without change. Also, a few weeks before a horizontal line appeared on the screen.

  If your phone gets warm it could because his tent to search for signals.

  Have you changed the 'network settings' because something had to change on why its giving you problems!

  You must call your Bell because they have one of the service!

  I'm with Bell I trust they need to help you!

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App