tap and click

Similar Questions

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Disable tap-to-click on the touchpad for coming 11 Pro and Mobile keyboard?

  Is it possible to disable tap to click on the laptop with the V11Pro keyboard?

  It looks like there is not no custom drivers for the touchpad. It would be nice, because the keyboard is so small that I keep key fat-palming.

  Thank you.

  Oddly it's under settings of the mouse and keypad touch-> 'Touchpad Delay' - simply on "Turn Off Taps" and it completely useless and annoying 'feature' bother you no more! Honestly - manufacturers test never actually such things? That devil wants a touchpad that clicks every time that they put the finger on it to move the mouse, when this touchpad has a press-more difficult-to-click function perfectly well?

• Deactivation of the "tap to click" on the touchpad and disappear the taskbar

  I LOVE Windows 7 and all its new features. But:

  • When my computer wakes up from the screen saver, when my computer is idle and disconnects me to save energy, or when I start my computer, the taskbar disappear. I got a quick fix for it, but it's annoying to have to do it every time I start a session on my computer. I go to the options screen sleep, hit preview, then I move the mouse out of the eve preview screen, and my taskbar are back. I'm assuming that this is a bug, is there a fix yet?
  • I have small hands that often brush against the Mouse touchpad on my laptop when I type, causing my mouse "tap to click on ' and I often find myself typing away in my document elsewhere. It is really annoying, especially since I'm working on a paper of 10 pages right now. I looked all OVER for a way to disable this feature, but I'm not. It's kind of ruin the ease with which I'm typing emails, documents and even this help forum.

  Important things... I have Windows 7 enterprise, which my college loaded on my laptop. I upgraded from XP, where I somehow fixed the mouse thing to not be a problem for me.

  Hi Magruderjc,

  Thanks for the information. What type of laptop do you have? You have downloaded the latest driver for touchpad for this laptop? Generally in this driver, you will see the tap to click options.

  Thank you. Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The Magic Trackpad ' tap to click on "no longer works after update to 10.11.6

  I have a retina 15' MBP mid 2014. My magic trackpad was working fine before the update. After the update to 10.11.6, I could no longer "tape for click on ' even if the option has been enabled in my preferences. The trackpad on the macbook works fine but the magic trackpad isn't.

  List of things I've tried so far:

  1. the removal of the plist file: com.apple.driver.AppleBluetoothMultitouch.trackpad and restarting

  2 reset the smc

  3 reset pvram

  4 disable pairing and repair the magic trackpad

  5. activating / deactivating ' tap to click on ' option within the system pref

  I'm running out of things to try here. Someone please help. Thank you!

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• Tap to click on Windows 10 Macbook Pro

  Hi, I was wondering if it is possible to enable tap to click on my macbook pro on windows 10. It annoys me really how I have to physically click the trackpad when running windows. Please help me!

  Open the Boot Camp in Windows Control Panel and the value of your touchpad to work the way you want.

• Tap and highlight does not work

  Hey, I hope you can help me with the following problem:

  In system preferences, there is the possibility to switch on ' tap to click on ' or something like that. I would like to have this option so that I don't have to press the trackpad physically. Yesterday I turned it off, just because of curiosity, then I turned it back on and now I can't type on the top of a window to drag around the screen, nor can I tap and drag the text to select. It's very frustrating. I already contacted support, we did a SMC reset, memory NVRAM reset and I have even reinstalled OSX 10.11. Always the same question.

  I appreciate any kind of help.

  Greetings from the Germany.

  In the menu bar, you select

   ▹ System Preferences... ▹ ▹ Mouse and Trackpad ▹ Trackpad Accessibility Options... ▹ Activate drag: with locked slide

• HP spectrum x 360 13-4195dx: how to disable permanently "Tap to click" on Synaptics Touchpad?

  Just bought the HP spectrum x 360 13-4195dx (13 "laptop convertible) and have updated the BIOS and windows 10. I always disable the function ' tap to click on "laptop, but every time I restart the laptop, tap to click reactive himself. I tried to create a profile in settings of synaptics but that doesn't work either. Has anyone found how to disable this feature on a permanent basis?

  Thanks for your help.

  I found it!

  For any one looking for a solution to disable way permanent synaptics tap to click...

  go to the windows registry (regedit search)

  expand "HKEY_LOCAL_MACHINE."

  Expand "SOFTWARE".

  Expand "SYNAPTICS".

  Expand "SynTP.

  Click on "install".

  Under 'Install', double click 'DeleteUserSettingsOnUpgrade' and change the value of "1" to "0".

  This will make it so that when you restart your CV, your tap to click remains disabled.

  Becareful with the windows registry, if you don't know what you're doing and you start to change the values on the things shouldn't you it can harm your system.

• Satellite E300 - troubled 'disabling' TAP to CLICK

  I am novice PC user and I just new E300 satellite high tower.
  I'm unable to 'disabling' TAP to CLICK function permanently - the user manual instructions don't seem to work properly.
  I am operating windows 7.

  I spoke with the technology, but they attend the fresh wtihout and they refer user manual only back.
  I also downloaded updated bios on their recommendation without success/change.

  Under MOUSE settings I select: properties for synaptics click pad - and then in detailed settings.
  I have a tab of TAPPING that I select, and then a pop-up box and screen with "ENABLE TAPPING" next to the white box. the text and explanation indicates tick or mark this box will allow eavesdropping. To leave empty so should delete function "tapping."

  It does not work. When I look at the icons hidden on the Ribbon at the bottom of the computer - each time after I closed it restored the service TAP to CLICK.

  Does anyone know how to solve this problem. I apologize in advance for my lack of computer savvy, but I also note that the user manuals do not seem to solve this problem and it is not aid of telephone technical support. ?

  If someone could help, I would be very grateful. Thank you coral.

  Hello

  E300 satellite does not for me, but there seems to be a series of Asia for Toshiba laptop.
  I found the download driver page:
  http://PC.Toshiba-Asia.com/SG/support/drivers

  Here, I would recommend downloading the Synaptics Touch Pad Driver - 15.2.4.4
  Uninstall previous installed touchpad driver in Control Panel-> software
  Restart the laptop and install the Synaptics Touch Pad driver.

  Now restart and check the water from the tap to click on option once more

• Satellite Pro A200: I want to disable "tap to click".

  Hello

  I want to disable the "tap to click" on my machine

  I tried to go to the settings of the control panel - mouse - device - settings - buttons, but the only choice there is 'enable the buttons' and if you clear the check box that you can not get out.

  I put the static status bar in the task bar and if I right click on the option "Tap to Click" is there, but greyed

  Help

  Maybe this thread can help you:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=121137𝤱

  * Mouse-> last tab-> settings of Synaptics TouchPad device settings *.

  In a new window, choose the second option called tapping.
  You have to uncheck the option allow eavesdropping.

  Good bye

• How to disable the TouchPad 'tap to click' on Satellite A200 - 15L Vista

  Until mid-December, I got the Synaptics Touchpad ' tap to click on "disabled. Then it became somehow activated, the context menu item to change to gray and the properties of the mouse, etc. settings contain no reference to it. It was suggested that updates nui Windows somehow. I tried to uninstall and reinstall the drivers for touchpad both directly from Synaptics and on the Toshiba site, but it did not help. Aside from using the disk recovery and reformatting what can I do?
  Toshiba Satellite A200 15 laptop (PSAE2E). Windows Vista Edition Home Premium.

  Hi Juliana

  I also read on the Vista updates that affect the parameters of the touchpad for me it sound very mysterious
  I thought about the same procedure of reinstalling touchpad driver.
  But it seems this helps doesn t to get the click back features.
  I think the recovery CD would be the last resort.

  Good luck

• HP ENVY 15: Tap to click stops working

  Tap to click stops working after the computer goes to sleep. It worked fine until about a week ago. Scrolling and swiping still work just fine, I just manually left click as it will not respond to tapping. If I restart the computer, it works perfectly again until I close the laptop and reopen, date on which it will no longer work. What can happen?

  Hello

  As soon as you remove the Synaptics software, Windows will load a generic driver that will give you the basic functionality (pointer control, click right and left etc.) until you reinstall the other packet of synaptics.

  DP - K

• How can I disable tap-to-click on the Satellite C660/C660D?

  There is no option to disable it on this laptop, I looked for the answer online but nothing, there seems to be no way to do it on this laptop model. I tried to download the new driver for touchpad of the site but had absolutely no effect and gave me more options to turn it off, it has changed nothing. Now completely stuck and its driving me crazy!

  The mouse click also on its own randomly even if Im not to touch, always seems to hurt when im game.

  I still want to use the touch pad to move the pointer autour, just don't want to use it to click.

  As far as I know the Satellite C660 supports Synaptics touchpad.
  The Synaptics touchpad driver should support the tap to click option.

  In order to ensure that Synaptics driver has been installed.
  Then go to control panel-> mouse-> last tab (button settings)
  Now, you need to access the properties of Synaptics and here you should find the option called tapping

  

• Two fingers tap right-click (ALPS, Yoga 500) - here's how...

  Hello

  I just wanted to share and in which case I need information later it's nice to be able to find it on the internet if I forgot.

  I bought a Yoga 500 14 - IBD (born to Win10 - not upgraded) as is was on sale and I thought why not I need a second machine. It's actually a very nice machine and the Pentium seems much better in daily chores that I imagined (but her as Atom - like execution but in fact it's more like just below i3)

  However not everything is rosy red. Like the 900 and probably many other laptops of Lenovo, he got a very annoying problem. NO TAP TWO fingers FOR a RIGHT CLICK ! Argh! Beyond me a deemed manufacturer manage to get two bad finger tap!

  The Yoga of 500 I got is like the low end version of the 500 (although it got FHD IPS) and that's probably why they put in a touchpad ALPS while my 900 has got a Synaptics.

  I have not found any information about to enable two finger tap, right-click on ALPS touchpads on the internet so I messed up a little round in regedit (I'm confident enough so has not been worried, worst restore values) thought why not share.

  1. open regedit

  2 Goto - HKEY_CURRENT_USER\SOFTWARE\Apls\Apoint\Gesture

  3. change the value of 2TapShow to 1

  4. change the value 2TapSupport to 1

  5. modify 2TapSetting value set at 13 decimal hex d

  6. do the same for HKEY_LOCAL_MACHINE\SOFTWARE\Alps\Apoint\Gesture

  7 restart the machine

  Step 5 is optional. You are now in the control panel of the ALPS under multi finger set what you want two finger tap to do! Most likely, you want to have in the context menu, but there are also other options if you care right click.

  This information is for Windows 10 ALPS driver v8.201.1611.252 so things are not exactly the same on your laptop and of course the use of information is at your own risk. Messing around in regedit can make operating system unusable if you make a mistake!

  - ENJOY YOUR 'NEW' TOUCHPAD! --

  Also while adjusting your touchpad settings you can adjust the speed. Diffinately scroll speed to the maximum and sensitivity to the max as well. ALPS seems to jerk and get the fantom clicks if you're the type who just slightly touching the touchpad. Affecting sensicity max and the touchpad features very well no involuntary jerkyness and click.

  Sorry for a minor error!

  I was writing this in my OneNote and discovered an error.

  Point 5 is 2TapFunc NOT setting (!) However, this doesn't mean probably much - only that you should open the ALPS Control Panel to then hit the function instead of working just after regedit and restart both with the fingers together.

  Sorry for inconvinience but the forum does not allow me to edit a post efter sometime!

• Satellite L50-B-1NL - how to disable tap-to-click on the touchpad?

  Hello

  I have a Toshiba Satellite L50-B-1NL running on Windows 8.1. I am trying to turn off the tap to click on the touchpad, option I think it's way of sensitive causes increased frustration.

  I searched on Google and it says there is an option to turn of the touchpad, but when I go in my option to disable settings, it is the only one missing? Is there a way I can turn off the tap to click as it makes me mental.

  If I understand you well want to disable touchpad, right.
  You can do this using the combination of keys FN + F5 or F5 key only.

  Please open the operating manuals and page 58. It you and find information very useful on the use of the F-keys.