tap call

Similar Questions

• Z10 blackBerry CALL FORWARDING

  I am happy with the advice given me yesterday that I can't run the blocking of specific numbers on Blackberry Z10, but the second part of my querry that was the call forwarding was unanswered. Please how can I forward all calls on my Z10 to another number? I need benchmarks on what menu to use, and what measures to take to transfer all calls to my Z10 to another number. Thank you. John

  Hello..

  Go to call Logs

  Drag down to settings

  Tap call transfer

  There you can set the number where you want to forward calls.

  Thank you

• B2BUA disconnected call on the penetration saying "not match the transport type in the answer.

  When I'm peripheral composition of polycom in our bridge number of conference on the appeal of the internet is not connected

  I check call logs in the conductor if call b2bua disconnected on the saying of penetration "not match the type of transport in response.

  Tap call point works well from polycom device

  Polycom > Internet > vcs expressway > vcs control > driver > GST

  You have more information, such as debug log files and traces of the various components,

  How your fields look like, how your area configurations are similar, requiring the use of legs that the Protocol, how encryption should be managed...

  It would be good to understand which component creates an incompatibility and what components

  It detects and why.

  Looking at each leg, first think how you expect how should resemble the call and then see how it looks in reality can give you some advice.

  Please note assignments with the stars below and set the thread if it's an answer!

• Smartphones blackBerry CURVE 9360 WARRANTY terms and CONDITIONS

  I always feel the same response from Vodafone on the Blackberry policy guaranteed only repair.  Please can I get a copy of the warranty of the handset cannot find terms which, so far, I still, so I can see if it is BlackBerry / RIM strategy or Vodafone.  (It does not say that in each of the events inside my box of Blackberry).

  Thank you.

  Hi Marika-05616

  This is for UK limited warranty Pocket . However, there are a couple of taps called Incident support but I'm sorry it's not free it will cost BlackBerry Incident based support . But we all know that the best possible route is always through your operator it will cost you.

  I hope this helps.

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Work at the level of the Document, but not from addToolButton

  I have the code that works perfectly when I run level document Acrobat 8.0 Pro.

  When I try to put it on the app.addToolButton function I get undefined errors.

  Could someone review my code and I would like to know how to apply it correctly in a call to the addToolButton function?

  It works Document level:

  page var this.pageNum =;

  numWords var = this.getPageNumWords (page);

  for (var i = 0; i < numWords; i ++)

  {

  var ckWord = this.getPageNthWord (page i);

  var stringInt = parseInt (ckWord);

  function buttonLocation() {}

  var q = this.getPageNthWordQuads (page i);

  m = (new Matrix2D) .fromRotated (this, page);

  mInv = m.invert)

  r = mInv.transform (q)

  r = r.ToString)

  r = r.split(",");

  }

  function makeCalloutButton() {}

  var l = this.addField (('000'_+_ckWord).substr (-3) + "_callout", "button", page, [r [4], r [5], r [2], r [3]]);

  l.setAction ("MouseUp", 'this.callout' ('000' + ckWord).substr(-3) + "();");

  l.userName = "Location Machine";

  }

  function workMagic() {}

  buttonLocation();

  makeCalloutButton();

  }

  function doTaps() {}

  If (ckWord == 'AA') {workMagic() ;}

  If (ckWord == 'BB') {workMagic() ;}

  If (ckWord == 'CC') {workMagic() ;}

  }

  doTaps();

  }

  So, here is my code that work IS NOT the execution of the addToolButton:

  app.addToolButton({)

  cName: "tapssMaker", / / name of your button

  cExec: 'taps();', call //Function

  cLabel: "click on", //The text on the button

  cTooltext: "Please let me buttons" //The Help Text

  });

  function taps() {}

  page var this.pageNum =;

  numWords var = this.getPageNumWords (page);

  for (var i = 0; i < numWords; i ++)

  {

  var ckWord = this.getPageNthWord (page i);

  var stringInt = parseInt (ckWord);

  function workMagic() {}

  var q = this.getPageNthWordQuads (page i);

  m = (new Matrix2D) .fromRotated (this, page);

  mInv = m.invert)

  r = mInv.transform (q)

  r = r.ToString)

  r = r.split(",");

  var l = this.addField (('000'_+_ckWord).substr (-3) + "_callout", "button", page, [r [4], r [5], r [2], r [3]]);

  l.setAction ("MouseUp", 'this.callout' ('000' + ckWord).substr(-3) + "();");

  l.userName = "Location Machine";

  }

  function doTaps() {}

  If (ckWord == 'AA') {workMagic() ;}

  If (ckWord == 'BB') {workMagic() ;}

  If (ckWord == 'CC') {workMagic() ;}

  }

  doTaps();

  }

  }

  The code you posted seems very well (with the exception of the reference to the document

  object, but it should still work). What exactly is the problem with it?

  You can do much more compact by using this structure:

  If (ckWord == 'AA' | ckWord == 'BB' | ckWord == 'CC') {}

  rest of the code to create a link object

• My new tab page is missing and now when I tap on: newtab in the awesome bar I get a page called subject: topic. Help!

  I use to have the grid pinned Web pages, whenever I clicked the X to a new tab page. It has now disappeared. I figured out if I typed about: newtab in the Awesome bar he would restore the page, but not all the time. Now when I tap on: newtab in the awesome bar I get a page called subject: topic... and I don't want that. How can I get my pinned sites on my new tab page?

  Open a new window or tab. In the address bar, type Subject: config.
  If a warning screen is displayed, press the button to be careful .
  That's where Firefox considers the information he should run.
  At the top of the screen is a search bar. Enter browser.newtab.url
  and press ENTER. browser.newtab.URL
  tells Firefox what to show when a new tab is opened.
  If you want, right click and select Edit. You can change the setting

  topic: Home (Default Firefox homepage),
  on: newtab (displays the more visited sites),
  Subject: vacuum (a blank page),

  or you can enter any web page or Subject: page you want.

  The same instructions are used to the new setting of the window, classified
  browser.startup.homepage.

• Threading and reuse of the node to call using reference of buffers (of the required adhesive tape)

  I tried to get the following information in the public domain for years and now that I have the answers, I'll share with those who might be interested.

  Caveat!

  Wrap your head in tape before reading just for the sake of security.

  My two questions were;

  (1) may LV re - use tampons of VI calling when you use VI serve call by reference?

  (2) is used when the use of call by reference UI thread?

  

  1 when you call a VI using the call through the reference node, the data in the pane of the copied or is node connector - this online as it would be with a Subvi properly implemented?

  Short answer: it's somewhere between the two.

  Long answer:

  The compiler does not know what will be called VI, but there a hint:

  the reference connected to the node of the call by reference. He uses to get the 'Prototype' for the call. Therefore, for optimal performance, use a prototype that has the same 'characteristics placeness' as it is called VI. That said, users don't know what are the "characteristics of the placeness.

  Before getting into the details, I will say that the overhead of these copies should not matter much unless it's a large data structure (a table with lots of items.) or a cluster/class with many fields or containing large networks etc..

  Example 1:

  If the prototype does not change the data, then the compiler assumes that the crux of the call by reference will not alter the data. However, at runtime, a check is made to see if the real called VI will modify the data. If Yes, then a copy is made and past so that the original data can be modified.

  Example 2:

  If the prototype contains an entry that is wired through an exit so that both input and output terminals can use the same buffer memory, but running an audit determines that the real called entry and exit VI do not share a buffer, then a copy will be made from output of the actual call to the original screws (combined input and output) buffer.

  I should also mention that, even with this behavior "are trying to get along with the prototype", it is not always possible to obtain good performance as a Subvi ordinary call. For example, if you have a situation where the prototype does not change the data and passes it through to an exit and then the compiler must assume that the data is changed (because, as in example 2, there are screws that may change even if the called real VI is not).

  And there are a few caveats:

  (1) this behavior "using a prototype" was new for 2009. Before that, we used a method more naïve data of passage that took all the entries will be changed and no outputs don't share a buffer with an entry.

  (2) this behavior can be changed in future versions, if we find additional optimizations.

  (3) this behavior is the same that we use for the dynamic distribution live (when you use the classes in LV)

  (4) If you want to create a VI can be used as a prototype, you can use the features of the Structure in Place to control the "characteristics of the placeness', namely the element nodes in and out of the border, the function"Mark as modifier"border nodes (note the pencil icon on the item), and the node always one copy.

  (5) the prototype is only the first reference ever connected to the node of the call by reference. So if you make a new prototype VI, you can just make a reference out of it plug into the crux of the call by reference. I suggest to remove the node from the call by reference and file a new.

  (6) for remote calls, we still "making copies" by transmitting data over a network.

  I hope that this helps, if you want information/clarification, so feel free to ask.

  2 - is the call made by the reference to run in the user interface thread node? If the call is made by a remote machine via ethernet, thread that host (the computer that makes the call by reference) runs on and thread that executes the target (the machine that contains the file VI) on?

  In the case of premises, the appeal made by the reference node does not require the user interface thread and may work in some thread the VI wants to run in.

  When you call a remote VI, the appeal made by the reference node uses the UI thread (detailed below) on both the client and the server.

  The client uses the UI thread to send the request to the server and there still when the response comes back. The user interface thread is not blocked during the time between the two.

  The server receives the TCP message in the UI thread, and then starts the call to the UI thread. The server also uses the user interface thread to send the response to the client. The user interface thread is not blocked on the server during execution of the VI.

  I hope that people find it when they need it!

  Ben

  
  

• Turn off what, in my view, is called the tapping function

  When I put the cursor over something, it it opens or closes. How can I disable this feature. I think it's called touch option but it's driving me crazy. I want to open and close using the bars left and right on the pavement. (I'm new at this)

  Hello

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.
  Also, look for the settings for your TouchPad.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  Hope this helps

  Rob - bicycle - Mark Twain said it is good.

• Tapping screen smart blackBerry phones don't wake up call service

  Double tapping the screen is no longer the phone wakes up. I have to use the power button or slide open keyboard to get the phone to wake up. I've rebooted etc...

  Hi @Hunt476

  You can check the gestures of awakening setting is turned on?

  To check go to settings > display

  Thank you!

• IPhone 7 people cannot hear me very well on voice calls

  People can't hear me very well when talking on IPhone 7. I can hear them perfectly but they say that my volume is very low

  Hi there johnty53!

  Welcome to the communities of Apple Support and thank you for bringing your question about the quality of the audio calls on your iPhone 7.  Being able to be heard on the calls is certainly of the highest importance so I'm happy to help you today.

  I understand that you have a brand new iPhone, but I have some things that we can test first to make sure that nothing hinders the microphones.  Also, you'll want to make sure that 10 iOS is updated, updates may have software patches to improve the functionality of your iPhone.

  Update your iPhone:

  1. Open the settings app.
  2. Settings > general > software update.

  Please also ensure that your carrier settings are also updated:

  1. Make sure that your device is connected to a Wi-Fi or cellular network.
  2. Tap Settings > general > topic. If an update is available, you will see an option to update your carrier settings.

  Get help with microphones on your iPhone, iPad and iPod touch

  Take care!

• IPhone 7 call log missing

  Hi, I noticed for the upgrade of iphone6 that now when I get a missed call that does not appear in the call logging so I have no idea its been missed. How can I get this working again?

  Hi there, ste_richards!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with the app phone on your iPhone. I know how it is important to be sure you see what calls are missed at any time. First of all, don't forget when you look in the phone application when you are in the log of recent calls, choose ' All'. Then, check out this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone, then the general and reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Transfer the call.

  Hi all, I wonder if it is possible to transfer a call made on the iWatch at the iPhone connected 5s?

  There are times that I answer a call on my iWatch, but because she is a sale of a business call, I'm waiting for a call from the desire to make the appeal more private with my iPhone.

  TIA.

  Hello

  To transfer a call to your iPhone:

  • Speaking of your watch, drag upward on the phone icon in the lower left corner of the iPhone lock screen.
  • Or, if your iPhone is open, press the green bar at the top of the screen.

  It is also possible to check who you called on your watch and then press and hold the call so that transfer you it to your iPhone:

  • After receiving the notice of appeal, turn the digital Crown to scroll down and tap on answer on iPhone.

  More information:

  https://help.Apple.com/watch/#/apd32b6c5658

• remove all logs of phone calls at a time.

  How can I delete all calls in my log of phone calls (and made) both and not one at a time?

  Hi there, GWS007.

  Welcome to the communities of Apple Support! I see that you are wanting in a more easy way to erase the call logs on your 6s iPhone on iOS 10 one both. I tend to mine accumulate over time, and I'll be happy to tell you how to do it en masse.

  When you open your application for phone, tap recent, then at the top right you will see 'change '. Once you touch that, you should see 'Clear' on the left side. Tap on that, and it disappears!

  Have a great day!

• Call button answer set to Apple Watch to take call on iPhone, not the watch?

  It's super easy to do with my rock:

  1 button response call on rollers

  2 put the iPhone to my ear and start talking

  BOOM, done. I just bought a Apple Watch 1, which is not yet there. So far its looking like what I read to do the same thing, it is like this:

  1. turn the Crown to make reply on iPhone button available.

  2. press the button revealed

  3. open my wallet phone box

  4 wide at the bottom left of the screen to take call

  5. close phone box

  6 put the phone to the ear and start talking

  Please tell me that the green button can be set to answer the call on the phone, not my watch. Im not Micheal knight, I want to use my phone! It should be configurable to swap the green button to answer the phone and the button revealed to answer on the watch.

  Hello

  No, it is not possible currently to answer calls in the way you prefer.

  The process you described (steps 1 to 6) accurately describes how to answer a call on your iPhone via your watch. (If your iPhone is unlocked after tapping the answer button of the iPhone on your watch, you would rather just type the green bar at the top of the screen on your iPhone).

  More information:

  https://help.Apple.com/watch/#/apd32b6c5658

  If you wish to submit comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/watch.html

• iPad, Safari froze and was told that I had to call apple for support assistance.

  My iPad Safari froze and was told that I had to call apple for support assistance.  I called and gave the last four digits of my serial number of the iPad.  They wanted me to download app and pay money, but it felt weird, so I hung up. Am I or my systems compromised in any way by calling and giving the serial number or hang up in time that nothing should be affected?

  Do this...

  Tap Settings > Safari and then slide down and tap clear history & data website, then reboot your iPad.

  The number they gave you is not Apple.

  Never give any personal data abroad on the net, including serial numbers.