Windows 8 Pro freezes on my Samsung NP300E5Z-A07IN

Similar Questions

• Windows 8 Pro x 64 boot Samsung SSD

  Hi all

  I tried to figure this out for the last couple days. I'm at work now, but I'll try again when I get home. Here is my question-
  I recently built my own computer. My pieces are-
  Motherboard ASRock Z77 Extreme 3
  Intel i5 3570 k
  SAMSUNG SSD 120 GB (I think that 840 series)
  Western Digital 1 TB hard drive
  Graphics EVGA Geforce GTX 660
  8 GB RAM (I don't remember the brand of the stick on the top of my head)
  I tried to do a clean install of Windows 8 Pro x 64 bit for the SSD. In the Setup screen, it detects two drives and I select the SSD drive and install it on the SSD. He moved very well I can say because no error message appears. But when the computer restarts and boots to the top, rises the symbol of Windows 8, the loading wheel little rises and they are there for about 2 seconds and then they disappear and the screen stays black with no mouse cursor or anything. Just a black screen and there just like that. I end up having to reboot the machine. I've done everything I can think of - I went into the BIOS and made sure the boot sequence is correct. I tried starting the SSD after restarting the machine with no result. The only difference is that when I did this and also removed the x 64 installation disc, Windows 8 comes and says that he was not able to load because it lacks a partition and so I try to troubleshoot it by performing an auto repair and diagnose the problem. When I do this, Windows says it can't auto repair. I did a reset and wiped clean car and tried again, but without any result. I get the screen that shows a partition is missing (and this happens only when I boot from the SSD with the x 64 disk drive) or I get a black screen.
  Another thing I tried last night was to reformat the SSD and wipe them off, clean, disconnect the hard drive regularly so that the only smart thing was the SSD and then reinstall windows and try again, but again, nothing has changed; just black screen.
  As far as I know, all my pieces are compatible with Windows 8 Pro. I'm at work at the moment, but as soon as I go home, I go back to work on that and I hope that you guys can give me some new approaches to this problem.
  Thank you all

  Hello

  It would be better to install Win 8 to the SSD with the other hard drive unplugged...

  Win 7 and 8 hide additional start install files on extra drives\partitions to the course. If you install with the attached HARD disk and then remove it later, windows does not start...

  Generally, this can be corrected with a startup repair, but I would rather avoid it in the first place...

  Format your SSD BEFORE installing Win 8. I prefer to use a 3rd party for this program...

  You could get by reformat everything by doing a 'Clean' installation without future issues...

  For what is the real cause of your problem, I suspect that you may need to set the SATA mode in Bios to AHCI... I got an OCZ Vertex, which would install OK and start OK after... After that win 8 detected all new material, I would get is a black screen.

  Also, make sure that the SATA connector you are using is not configured for Raid...

  In addition, try to remove the graphics card and install Win 8 with the HD4000 Intel. Once everything works, then add the NVidia.

  I built a similar machine with a surfboard Z77 Extreme 4, and it is on this forum that I had the problem of the AHCI pop up.

• Windows will ask drivers during the installation of Windows 7 Pro on samsung SSD 950

  I'm doing a clean install of windows 7 Pro on a new Samsung 950 m2 Pro drive. My motherboard sees the drive but the windows 7 install is not and wonder which I can't find a driver. It is a new construction. Asus motherboard. I'm installing from the DVD, and everything starts fine until the Setup program cannot find the 950 pro. The 950 pro is the only player at this moment, I installed. Is there any solution for this?

  Thanks for looking into this but I found a solution, all I had needed was the pilot for the 950 pro, once everything went as smooth as, say Kalua. Feel good that here the monster has increased.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• PCI-MXI-2 causes w/SP3 Windows XP Pro to freeze

  Here are the specifications of the test machine which is the gel with the PCI-MXI-2.

  Motherboard: C7P67 (supermicro)

  Mobo has no embedded video so I've tried three different cards PCIe...

  Currently installed: Geforce GT 430 DDR3

  RAM: VS2GB1333D3 total (Corsair): 8 GB RAM

  PSU: 550W

  No other devices are installed.

  We have 2 cards PCI-MXI-2 and the two freeze Windows XP Pro w/SP3 at startup.

  It gets to the desktop and then, about 30 seconds everything is frozen, unresponsive keyboard/mouse, nothing...

  Removing the PCI-MXI-2 causes the operating system to work properly.

  I installed the NIVXI331 software for the driver. We tried an another C7P67 motherboard, same problem.

  I also tried different revisions of the BIOS as well as the latest BIOS for the motherboard, the same question.

  We are trying to solve this problem with this particular motherboard (C7P67) for our client.

  I have read the manual for the PCI-MXI-2 card and the rocking U17 matches what is on the card for a 'normal' functioning (1, 2, 3 switches are "off" with the exception of switch 4 "CT")

  I also tried the two PCI expansion slots are available on the motherboard, the same question.

  Any suggestions please? Thank you!

  Thanks for your response! For some reason, the cards work now with the motherboard. Nothing has changed.

  It was strange.

• I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

  I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

  Hello

  1 is it only during the use of the internet?

  Method 1.
  a. click on start and then right-click my computer.
  b. click Properties.
  c. click on the Advanced tab and then click settings under Startup and recovery.
  d. under system failure, click to clear automatically restart it the box.
  e. click OK, and then click OK.
  f. try to reproduce the error message.

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also I would ask you to update all the drivers of material from the manufacturer's Web site.

  I hope this helps.

• HP DM1-4110SD touchpad freeze and sometimes keyboard under Windows 8 Pro

  Hello

  I have the following problem:

  When I use the netbook with Windows 8 Pro (64-bit) after some time, the keyboard or touchpad will freeze. I have seen under drivers and downloads there is a fix Windows 7 (KB2621491), but this fix is not available for Windows 8.

  I tried to disable the sleep for the USB root hub, but that doesn't seem to work.

  Is the fix is going to be available for Windows 8, or y at - it another way to make this work?

  Hi Speeder.

  Most of the W7 drivers will work W8. I'm not sure that an individual. More than likely HP won't to material support for W8 on any system purchased before October 1, 2011.

  Take a look at this document http://goo.gl/CO6uV , which provides information on the upgrade of Windows 7 to 8, driver compatibility and much more.

  Please let me know if it helps.

• Intermittent USB mouse freeze on Windows 7 Pro 64-bit. Tested with several mice that work fine on other computers.

  I am having a frustrating problem where my Wired Optical mouse appears to 'freeze' for 10 seconds on my machine Windows 7 Pro 64-bit. Meanwhile, everything else on the computer works fine, including the keyboard (connected through PS2). The mouse does not seem to lose power because down the red LED stays on. At the end of the freeze period, I hear the sound of Windows to disconnect USB, but there is no error or windows pop-up ads of any kind on the screen.

  Some more info about the configuration:

  * Core i7 950 processor
  * 12 GB of RAM
  * Radeon HD4950 video card (or almost)
  * The main SSD drive
  * 2 external powered USB drives, 1 powered MIDI keyboard, 1 USB dongle
  * Windows experience score 7.3

  I tried things that did not work:

  • Turn off all the power management, including the management of power supply for USB, USB hubs-> suspend to win power, etc.
  • Permutation of mouse. The problem came with three different mouse from different manufacturers.
  • Try the mouse on different computers of W7 Pro. Confirmed that the mice are not the problem.
  • Disconnected all other USB devices except the mouse. Problem persists.
  • Uninstalled all the drivers for the mouse and use MS default drivers.
  • Installed the software Microsoft mouse & keyboard center.
  • Installed the software from the manufacturer (ie. logitech) specific mouse driver.
  • Tried every USB port, the front and back, on my computer, including USB3 vs USB2.
  • Scanned for malware (using Malwarebytes)
  • Search for viruses (using Nod32)

  I must point out that NO other devices are having problems on this computer. My external hard drives all work perfectly. My printer when I plug it, works great, like my USB dongle. My MIDI keyboard never loses connection. Even when I have my phone connected Android, which normally creates a huge noise if I unplug it, never disconnects even for a second. It is therefore clearly a kind of mouse problem.

  The problem seems to occur regardless of what I do, although it seems MORE common if I use actually the mouse. If I'm just typing (as I am now) it seems not really to happen. On the other hand, sometimes hours go with no problem and other time it happens literally every few seconds.

  Remove the check to "improve the accuracy of the printer" logic. I had two computers windows 7 x 64 that gives me the same problem. When I tried a wireless mouse, the problem disappeared. they do not use the windows controls.

• Genuine Microsoft windows 7 pro suddenly saying that he is not after 3 years, it has activated and provided by samsung?

  Hello

  Can someone help me on this please, all of a sudden my windows 7 pro machine is popping up on the screen of genuine advantage claiming he can't validate my machine. I haven't changed anything on my machine because I got it several years ago and it has been activated a long time ago.

  I ran diagnostics of genuine advantage from microsoft, it's out, what should I do?

  Thank you

  Ang

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 76HMH - M4RKY-V4HX6
  Windows product key hash: CegQyzk5Zd0qxFdtmueCy9UmviY =
  Windows product ID: 00371-OEM-8992671-00013
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {63CEAAF4-02B5-4C00-98D5-E02330FF6B54} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130318 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Professional Edition 2003-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {63CEAAF4-02B5-4C00-98D5-E02330FF6B54}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-V4HX600371-OEM-8992671-000132S-1-5-21-1180976754-291495307-1985554706SAMSUNG ELECTRONICS CO., Ltd.. P580                       Phoenix Technologies Ltd. 06JM. M014.20100903.Ksy20100903000000.000000 + 000EC1D3407018400FC08090409GMT Standard Time(GMT+00:00)03SECCSDLH43STAR100100Microsoft Office Professional Edition 200311A28810AA593CDD28Es8iIR/tvVHonHzxe7ANLtWMHs =70145-745-6302996-573871

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700013-02-2057-7601.0000-2502014
  Installation ID: 006732564226349160458242469416619292799903544266779954
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: V4HX6
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 09/08/2014-00:39:58

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 9:7:2014 13:58
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: MgAAAAEAAQABAAEAAAACAAAABAABAAEAln1cP2oDIO3COF5syizMguwO2O6uWj5kXF0 =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC SECCSD LH43STAR
  TCPA PTL CRESTLN
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• Reinstall Windows 7 Pro on new 2 TB HDD freezes on Windows startup screen

  My 160 GB hard drive crashed and I am trying to install Windows 7 Pro from the installation disc that came with my computer on my new hard drive 2 TB.  I read the posts that took even freeze on Windows startup screen and I disconnected all devices and devices except the mouse and keyboard.  I don't have 2 GB of memory simms, 8 GB installed, but has released simm all but one.  I tried to reinstall Windows 7 Professional several times and whenever it crosses the screen of facilities, then when the computer restarts it freezes at the Windows startup screen.  Help!

  Evelyn,

  (1) I have an idea which may simply not work. Install the software of Western Digital's Data LifeGuard Diagnostics.

  (2) then select / click on the Seagate 2 TB of disk.

  (3) then click on the little icon above the list of player who scored "click to run tests.

  (4) in the popup windows choose the option "write zeros". Click 'Start' and select the fastest two write options who writes zero for beginners / before the command and at the end / last sectors on the disk. It will take about 2 minutes or less. Once the zero finished writing your drive will be in a State of 'Raw' (just as if you removed from the box for the first time).

  (5) open "Disk management", you should see a windows asking you to 'Initialize' the reader. Choose the MBR (Master Boot Record "option.

  Now try to install Windows.

  J W Stuart: http://www.pagestart.com

• Windows 8 Pro upgrade on Samsung ATIV Smart PC Pro XE700T1C-A01IN

  Hola,

  Got ATIV Samsung Smart PC Pro XE700T1C-A01IN
   
  Here is the configuration of the system:
   
  Edition of Windows: Windows 8 single language
  Manufacturer: Samsung Electronics
  Processor: Intel Core i5-3317U CPU @ 1.7 GHz 1.70 GHz
  Installation of memory (RAM): 4.00 GB (3.89 GB usable)
  System type: 64-bit, x 64 processor operating system

  Hard disk: 128 GB
  Pen and touch: pen and complete Windows Touch support with 10 Points of contact
   
  I want to upgrade to Windows 8 Pro because I am a .NET developer and I have Visual Studio Ultimate 2012 and SQL Server installed 2012. Also, I had MS-Office and Norton 360 installed. I was only 35 GB left.
   
  I'm working on the Windows Phone 8 App development requiring Hyper-V.
   
  What are the advantages and disadvantages of the upgrade to Windows Pro 8 given that it is a Tablet and also, this Windows Blue is on the cards.

  Should I switch to Windows 8 Pro or not?

  Thank you

  First of all, Windows 8.1 (blue) will be a free update for users of Windows 8 and Windows 8 Pro.

  There isn't really any disadvantages of the upgrade to Pro, just additional benefits;

  -Hyper-V client

  -Remote Desktop

  -BitLocker Drive encryption

  -Network backup

  To the top of Windows 8 for Windows 8 Pro:

  http://Windows.Microsoft.com/en-us/Windows-8/feature-packs

• Is there a driver for Samsung ML-1640 for Windows 8 Pro?

  Hi, I bought Windows 8 Pro recently, but my printer (Samsung ML-1640) don't work, even after installing drivers, I know that the drivers from the CD are not compatible with Windows 8, and I searched through the Internet and can't find anything, so any ideas?

  Hello

  Welcome to the Microsoft community.

  According to the description you provide that your printer does not work after having upgraded to Windows 8.

  I suggest you try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Also I suggest you to download and install Windows 8 drivers from the following link:
  http://www.Samsung.com/in/support/detail/supportPrdDetail.do?menu=SIA00200&prd_ia_cd=&prd_mdl_cd=ml-1640/XIP&prd_mdl_name=ml-1640&srchword=ml-1640%20%7C%20ML-1640/XIP

  If you have any further questions on Windows, feel free to let us know. We will be happy to help you.

• Windows 8 Pro startup problem

  Dear friends

  I have a Pc assembled with 8 GB of Ram. Hard drive 1 to, 1 GB memory graphics + DVD Writter.

  There the partion to C. H. I have a licensed version of Windows 8 Pro 32 bit (Dick Original). Win 8 pro is installed in C: (space is 100 GB).

  It was working fine. Latest installation has Samsung Kies.

  But the day before yesterday when I swtich on the machine it started but I noticed that it took more time to start. and sudddenly he freezes on.

  So I stop it and new Rebooted

  He then suddenly splashed the message below (or similar) I would not even read. The only offer I got was ' your PC encountered a problem '.

  So I googled and got the other party. It could be another message but I am sure that the ' your PC encountered a problem ' part is the same.

  "Your PC ran into a problem and it restarts. responsible for collect just some info the error and then put back on well for you (100% complete). »

  The message did not sleep there. Immediately another message showed so wording

  "Prepairing for the repair of some/automatic '.

  I waited about 1:30 hours and nothing happened. No Progressive bar (which Microsoft shows everywhere). So I sat there like a statue. I didn't know what was going on inside. No message, full of persentage nothing.

  Yet once restarted, it with my dvd pro Win 8. And selected repair my computer from the installation screen.

  It is said

  Diagnosis of your computer... Two hours went by. Suddenly the message changed to check for disk errors. I waited for more than 3 hours. Nothing happened. So I closed the computer.

  I am really frustrated because I have important data inside. I need to start it up in any way.

  Please, help me to enforce. I do not have backup.

  Hi Baro

  Happy news. I got it to work. Yesterday, I have issued an order to repair the MBR (bootrec.exe /fixmbr). After that I again checked with no luck. I unplugged my hp printer. Removed all the software I installed by inserting my victory 8 dvd and boot from dvd and then using evil taken view option. When I start the computer it goes immediately to "auto repair mode. So I decided to leave it as such to see what will happen. After 3 hours the mode changed to mode "Diagnostics of your computer".

  After that the 3rd hour, it changed to "Disk error checking" Mode  I left and went to sleep.

  I woke around 02:30 and checked state. Identical to the latest fashion. The benben8484 came after 45 minutes. When I came back, he showed my login screen. Immediately, I've connected and then turn off the computer correctly. Today, I'll check and start to reinstall what I removed.

  Sort of thank God it's fine now.

  I tried to go back my memories as I was able to pin point the exact reason, why this happened.

  Please, do not try things.

  1 if please do not connect your mobile phone then turn on the computer. Put first on the PC and after login, connect you Mobile.

  2. do not try to stop updates (Windows updates).

  3. do not stop between updates.

  Windows 8 takes more time for average error Windows 7. In my case, it took 7 hours.

  Thank you once again

  Sen

• Maximum supported size of HARD drive for HP Elitebook 8440p Windows 7 Pro 64 bit runing

  Hello, I just bought a HP Elitebook 8440p "off lease" of Tigerdirect and seeks to upgrade the two memory (from 4 GB to 8 GB) and put in the eligible of the biggest HARD drive I can. Either a 512 GB SSD or a 1 TB WD hybrid WD BLACK2 (1 TB HDD / 120 GB SSD Combo drive in a single package!). I would like to see more large disk addressable by using Windows 7 Pro 64 Bit OS since I don't seem able to find this info on the web. HP offers only only a 256 GB SSD in its specifications. but I didn't know if it was do limitations of BIOS or availability at the time of production, even for the HARD drive to 512 GB.

  Also, I would like to know if 9.5 mm compliant Bay that it needs to be for the WD drive. Can't find that either, and while the new laptop has not yet happen, all measure exactly the same way regarding what works and what simply cannot be "cheated".

  Thank you for taking the time to read this and NO information to that effect would be Greatl appreciated!

  Essentially the reason why you do not have a maximum size of hard drive is because there is not everything. Between SATA and 64-bit OS', worrying about maximum size of hard drive is a thing of the past. Are the biggest readers found in the manual, as you suspected him, just a function of the market at the time of manufacture. It was a few years ago now, it is so understandable that the offerings were "at the time" more thin than now.

  Here is the Service Manual:

  Manual

  Page 4-9 shows the procedure of the Bay and the replacement of the hard disk. The Bay is made for a 9.5 mm thickness 2.5-inch wide SATA hard but the new 7 mm readers also works. The black hybrid drive requires some software (included in the package) to treat the two drives in Windows and I read a modest amount of disappointment in the documentation about them. If you can afford the 512 GB SSD go in this direction and you will not be sorry. I use a Samsung 840 Evo and it has worked perfectly for me for almost 2 years and the most recent 850 I hear is even better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).