Taste Pro CS6 crashes after the PC wakes up from sleep / 2nd monitor blocked by preview

Similar Questions

• delivers USB ports until after the pc wakes up from sleep

  When I put the pc to sleep its all good, but when I try to wake up the pc to sleep, the mouse stop working, it is power as I see the red light on the mouse, but I can't control it I tried to change the power supply to all three options, I put the USB suspend to disable, I enabled device wake up 'allow' the computer or turn off depending It has been verified or not, and the result is the same: works for the first sleep, but after that, he returned. I check the http://support.microsoft.com/kb/266283 link, which seems almost there, but there is also another device that is affected: the wireless card. What happens to her is it turns on and is active but the router should automatically connect to is not. When I go to 'network' and select the router, the "connect automatically" box is checked, even if it does not connect. the only way to get 2 assistive devices is again to disconnect and then reconnect: the mouse moves and automatic network connects again.

  Thank you

  Hi Aromero,

  I suggest to follow the steps below and check if it helps to solve the problem:

  Method 1

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. on the desktop, press the Windows key + X , and then select Device Manager.

  2. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  When finished, restart your computer. Your USB controllers will automatically install.

  If this does not resolve your issue, go to method 2

  Method 2

  Install the latest drivers for your motherboard chipset.

  This method updates the chipset of your motherboard drivers, so that your computer will use your USB devices.

  1 see the documentation for your computer that will contain the name of the manufacturer of the motherboard.

  2. visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers

  (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)

  Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  I hope this helps.

• keyboard and touchpad does not work once the PC wakes up from sleep/standby

  Please help find the diagnosis and explain in detail what to do with the following problem: keyboard and touchpad for PC with Win 7 Ultimate stop responding when you wake up from sleep/hibernate implementation modes. If you plug the USB mouse, the cursor move again come back to turn off the PC is to reload the OS from scratch. Where to look in the PC software?  Thank you for your competent answer.

  Hello
  I suggest that you follow the steps below and check out them.
  You must be logged on as administrator to perform these steps.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the keyboard, and then double-click the device name.
  3. click on the tab power management and then check the option "allow this device to wake the computer".
  4. click on Ok.
  5 locate the touchpad and repeat step 2 and 3.

  See also: http://windows.microsoft.com/en-US/windows7/Solutions-to-common-power-problems

  You can also try to update the drivers for the keyboard and the touchpad.
  For more information: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support Engineer

• 5ooo mouse MS does not recover once the computer wakes up from sleep

  mouse MS 5000 does not restore after that the computer wakes from sleep.

  OS vista.have to restart the computer for recooect mouse.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you to follow these steps and check if that helps:

  Method:

  Check allow this device to wake the computer includes a graduation.

  Here are the steps:
  1. click on start, type device manager in the search box.
  2 Goto Device manager.
  3. click on keyboard, it will display your keyboard, do a right click and goto Properties.
  4. Select power management.
  5 check allow this device to wake the computer.
   
  Follow the same procedure for mouse, restart the computer and check if it works properly.

  Method 2:
  Also, try to update the latest drivers for the video card and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:
  http://support.Microsoft.com/kb/838398

  It will be useful.

• mouse and keyboard do not work once the computer wakes up from sleep mode

  running Win7 64 bit

  Processor Intel core 2duo
  x 2 corsair 2 GB RAM
  ATi Raedon 4800 series gfx
  all the drivers are up to date.
  no idea why they don't work after the release of the mode not sleep? It is very frustrating as I have either stop whenever I'm done with the computer, or reset when it comes out of sleep mode.

  Oops, ok, so I disappeared for a bit there.

  Yes, I tried that as well.
  OK, so, this weekend, I flashed my bios. and that seems to have solved the problem (woohoo)
  for anyone else reading this, if you are not very savvy with computers, I would say DO NOT Flash your BIOS, but find someone who knows a little about computers to do it. If you do not Flash your BIOS correctly, it can damage your motherboard

• Wake up from sleep mode, monitors turn on but no image is displayed. HP ENVY Phoenix h9

  Product: HP ENVY Phoenix h9 PC Series

  Product #: H3Y51AA #BL

  Model: h9-1387

  OS: 8 64-bit Windows

  Monitors: DELL 2407WFPHC x 2

  Updated graphics drivers to the latest version non-beta.

  Hello

  Since buying my PC a few months ago, it has been one of the ' display' problems after another. This is the current problem:

  When executing step by step away from my computer, I block via Win + L and shortly after that my monitor turns off. When you return a few moments later, I try to wake up to the top (but not really "wake up"...) To try to solve the problems of previous display, I already disabled hibernation options and sleep) my computer by moving my mouse. This causes monitors leave standby mode and be able to raise but what is dispalyed is black screens when I should have been introduced to the login screen.

  Mouse clicks and keyboard do nothing and I'm stuck at black screens. To continue, I press the power button on my PC causing the hard drives to spin-up and shortly after the computer turns off. I press the power button and start the computer to the login screen where as soon as I get my password, Windows loads and all my programs etc appear like they were before I blocked my PC.

  You can see previous problems, I had the list below, if all goes well they will help you to detect the cause of the current problem.

  Help, please.

  Thank you!

  Peter

  Previous problems I had:

  (1) when the awakening from hibernation, the computer would not wake up screensavers leaving no way for you to connect and save your work. Hard reboot needed. Solution: Disable hibernation Windows features.

  (2) error in the sense of "driver has no display and recovered." Possible solution: disabled hardware acceleration in Firefox.

  (3) when waking from sleep, I find that my 2 monitors have merged into one and a different resolution than usual. Once entered password to connect, programs that were on separate monitors are now on the same monitor. Right click on the desktop and selecting 'Screen Resolution'-> 'Detect' would set monitors to return to normal until the problem recurs. Possible solution: updated graphics driver. Don't know if this problem has been corrected, it may have just been concealed by the new problem mentioned above.

  Thanks, but the steps above had no effect.

  However, during a windows update, my graphics card driver has been restored and that seems to have stopped the problem.

  Unfortunately, again I see apps that were on two screens before lock/standby, appearing on the screen even after release sleep/wake. So far he did not often so we'll see.

• First Pro CC crashing after the importation of the media

  I just built my first PC a few weeks ago for the sole purpose of editing with first Pro CC, but every time I have import any media and try to use the view, the program crashes. As long as I do not import, the program does not crash. After I imported, it will be crash without worrying if she still a picture or a video.  I even tried to load the project "Eagles_Doc_Final" which gives to Adobe, as practice and which will crash immediatelysince there is already media imported.

  
  

  I'm about to start an assistant job in editing my work and I need to start training at home with first since I've only used Final Cut in the past.

  My system:

  Trial version of first Pro CC - I really want to buy a subscription, but I can't even make it work.

  Windows 7 Home Premium - make all updates using the Update window.

  Processor - Intel Core i7 4790 K - updated drivers using version 2.0 driver Intel (r) update utility

  Motherboard - GIGABYTE GA-Z97X-UD3H -Bios is version F5. There is an update F6 and F7, but do not know if it would be necessary?

  GPU - no - I wait to see how fast first Pro CC is without using a GPU for acceleration. I read that I have doesn't have a GPU to run the program. Is this correct?

  This is the error I get...

  "Adobe Premiere Pro CC has stopped working"

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 8.1.0.81

  Application timestamp: 5426694c

  Fault Module name: devenum.dll

  Fault Module Version: 6.6.7600.16385

  Timestamp of Module error: 4a5bded7

  Exception code: c0000005

  Exception offset: 00000000000016a 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: ec5a

  More information 2: ec5adb2545b190cc19da7bdfa78d5bf1

  3 more information: 52eb

  Additional information 4: 52eb6b5eb5247c23714f771b797ebaa7

  and this is the error in the event viewer application.

  General

  Name of the failing application: Adobe first Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c

  Name of the failed module: devenum.dll, version: 6.6.7600.16385, time stamp: 0x4a5bded7

  Exception code: 0xc0000005

  Offset: 0x00000000000016a0

  ID of the process failed: 0 x 1114

  Start time of application vulnerabilities: 0x01d00202f06d1b2f

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro 2014\Adobe first Pro.exe CC

  Path of the failing module: C:\Windows\system32\devenum.dll

  Report ID: 3bf56dba-6df6-11e4-9734-74d435e5c333

  If anyone can help point me in the right direction, I would gladly appreciate it. I don't want to jeopardize anything with this new job because I couldn't get this to work.

  -JR

  Hi jacobrivera68,

  Before importing anything, go to file > project settings > General and change the GPU acceleration for playback (software only) Mercury engine and see if that fixes the problem.

  Thank you

  Regalo

• Constant crash after the last update!

  History is constantly crashing after the last update, I've noticed the logo has changed. If I use a different application then when I click on new in the history in closes unexpectedly. Any ideas? can I roll back? What to know about me? Thanks in advance,

  Mac Pro running 10.9.1

  32 GB of ram

  Intel Core i7

  Member of creative cloud

  Update: this issue is resolved with the latest version of Adobe AIR. Please download and install the most recent http://get.adobe.com/air

• If I buy one Prime Minister prepaid by annual pro adobe application, after the after the end of the subscription of one year it would be possible to use the program without updating or should I pay each year?

  If I buy one Prime Minister prepaid by annual pro adobe application, after the after the end of the subscription of one year it would be possible to use the program without updating or should I pay each year?

  You will not be able to use the program after the end f the subscription, unless you continue to subscribe.  The only way to use Premiere Pro without subscription is to buy the CS6 version.  Remember that projects CC is not properly open to the CS6.

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

  Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

  It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Halo 2 crashes after the level "Gravemind".

  Halo 2 still crashes after the cutscene at the end of the level "The Gravemind".  The game acts like it's loading to the next level with the logo of Halo 2 and the vertical lighting of back and forth set.

  I had to play at this level twice, otherwise I can't get any achievement.  I'm tired of having to play at this level.
  My computer specs:
  AMD Phenom II X 4 955 3.2 Ghz Black Edition
  ATI Radeon 9870 x 2 1 GB GDDR5 Ram
  1 TB Western Digital Black
  ASUS M4A79T Deluxe Motherboard
  8 GB DDR3 1600 MHz Ram

  Hi Chuckthetekkie,

  Welcome to Microsoft Vista answers Forum!

  The system requirements for your computer is fine.

  I have a few here that might solve the problem.

  I suggest you perform the clean boot which disable the application non-Microsoft temporarily in conflict with programs. It helps us find what third-party application or service is causing the problem. Follow the steps in the link: how to troubleshoot a problem by performing a clean boot in Windows Vista: http://support.microsoft.com/kb/929135 Note: make sure to put the computer in a normal state, proceed to step 7 in the link. After you find out which application is causing the problem, please disable the program or application. If the problem persists, I suggest you to visit the site of the game Halo 2 to find if there are any updates or patches.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.