TC recognizing only no internet modem Frontier

Similar Questions

• iPhone not recognizing only no internet after installing the new cable router attached to the Airport Express Terminal.

  My configuration is modem cable to Airport Express which is connected wireless to a Time Capsule.  I am able to surf with my laptop, it's the iPhone 5 s is no longer is grateful for the internet.

  When I turn off the wifi on the iPhone, Airport utility displays only the Internet icon with the green light. The cable modem has no possibilities of wifi so I do not understand to THE.

  When I turn on wifi, the wifi devices present with green lights and the internet shows a yellow light.

  Through the different ways for a solution.  Power cycling my net and telephone.  Forget this network don't forget the password and I have to choose the wifi and enter a password. Still seeing internet.

  Why should you have the Airport Express? The Capsule is also a WiFi router.

• Updated Internet modem

  My internet provider (Optimum / CableVision) updated the modem cable to a device of 5G.  My Base station / Time Capsule has a yellow flashing light; any other WiFi device (2) don't have the problem.  Open Airport utility and the Base Station / Time Capsule is not found; other devices are visible.  No idea why this might be implemented?  Like I can't 'see' the unit, I can't determine if firmware needs to be updated, etc.

  Suggestions would be appreciated.

  Yes, there is a new update of firmware for devices airport. Maybe that's why the orange light flashes. However, it must appear in AirPort Utility. Maybe try to unplug the unit, wait half a minute and reconnecting. Also, make sure you that there is an Ethernet cable from your modem cable to the WAN port (represented by a circle of points) on your base station, unless your base station is in mode "extend a network" rather than in mode 'create a network '.

• Router will not connect to internet (modem Comcast)

  I have had this router for a few months with no problems. But this morning all my computers says limited connection... I'm still on the network, but not internet available.

  I tried to unplug the power on the modem and the router, but the same thing happens. If I connect a computer directly to the cable modem, I have access to the internet very well, which leads me to believe that it's a junk router.

  R7000 genius says not connected as well...

  Any ideas/suggestions?

  haw1144 wrote:
  Any ideas/suggestions?

  
  Since you seem to be getting an Internet connection very well when the connections of a PC connected to the modem, I would recommend that you try to spoof the MAC than PC. To do this simply:

  From the PC that you are able to access Internet when connected directly to the modem, connect a cable to one of the four on the R7000 LAN ports. Connect to it via http://192.168.1.1/ with admin as user name and password as password. Click Advanced , and then select Setup -> Internet Setup. Make sure everything is set to automatic and dynamic and to the last option for The MAC address of the router you choose to use computer MAC address. Click apply and wait for the page to come back. He should get back to work now!

  If it still doesn't work, please tell us how the Internet light on the front of the router is turned on (the globe).

• MacBook Pro question mark flashing, no wifi, only own internet connection

  I have a flashing question mark on start up with my MacBook Pro. Through the process of restarting, but it asks me to choose a wifi network. I did not, as my computer has its own internet connection, so can not continue to the next step. Help please?

  If you are connected to internet through being directly connected to a modem via ethernet. You should be able to ignore the WIFI configuration prompt. Have you used the option of disk utility to check the repair or erase the disc? The withdrawal volume. You can also try using command/Option/R for recovery to see if you can use ethernet. I did once and trying to remember how I did it.

• I have a P4, XP w / updated to SP3, w / HD 500 G primary and slave HD 160 G - during restoration - primary HD is recognized only as 160 G

  I have a P4, XP with SP3 update, the main hard drive was 500 g, with the disk 160G hard slave.  I have problems with Outlook and my ISP since June 2012. But during a recent "Restore", the first HD is recognized as being only 160 G and not the 500 G. Help, please.

  In the past (around), I was able to fix a lot of things for my computer.  I have all my software disks.  There was a time where I repartioned / reformatted hard drive / operating system.   If I'm stuck, a friend was able to help me through.  It took so long:(pour recharger tous les programmes.)  I think that windows XP allows discs hard more than 160 G, but it could be an additional step to make it work.

  Anyway, in 2012, since June, I used the function "Restore" maybe three or four times, before giving to the machine to a computer SCIENTIST friend.  He spent a little time, so I only mentioned the problem drive hard in passing.  My computer is not a brand name of computer and works a lot slower now.

  He's too old for who spend a lot of time on this subject now.  Is that what I can do to try to get a bit more use out of it?

  Clearly your message is not your comments on the web site of Microsoft Community, so I moved it on forum Feedback for Windows XP 'Hardware and drivers' forum where it will be on the subject.

  Your BIOS see and identify the disks properly?  Have you checked the cables and the power supply for the readers?  Judging by the use of the words 'master' and 'slave', these must be IDE/PATA and SATA disks not.  Have you tried to use the Cable Select instead of master/slave?  Have you moved the readers on the cables?  Have you tried to connect the unit of size reduced to another PC to see if the other PC also sees as smaller?

  Windows XP is quite capable of having large capacity for drive C discs.  It is for the BIOS of the PC hardware /, not Windows.  I used a 750 GB drive as boot drive on my Windows XP system.

• Why my micromax USB internet modem disconnects in 3-4 minutes?

  My micro max 352 G Internet USB modem still disconnects in 3-4 How can minutes, I fix this?

  Hello

  The device disconnects or the Internet connection?

  I suggest that you visit the modem manufacturer's Web site and update the firmware, check if it helps.

  For more information on the firmware update, you will need to contact the manufacturer of the modem.

  You can also run the following methods and check if it helps to solve the problem.

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After checking the problem, you must re-enable the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: update driver wireless if you are connected to the computer via wifi.

  http://support.Microsoft.com/kb/283658

  Method 3: Update Chipset drivers

  I also suggest that you update the drivers from the chipset on the computer by contacting the manufacturer of the computer, check if it helps.

• WRT120N getting only no internet IP through DHCP

  Hello.

  We have a computer playing the role of DHCP server in a network. receives a public IP address to a DSL modem.

  There is a SF100D-16 switch connected to the network and the router is connected to it.

  The range of IP addresses for the DHCP server starts at 192.168.2.121

  I put the address of the router's local network at 192.168.2.200, but by connecting the internet port to the switch give anything else than 127.0.0.1

  What I'm missing here?

  Thanks in advance. -.

  Edit: Sorry, getting into trouble with editing here.

  I've already solved with the support of the conversation.

  2 problems have NAT enabled in the advanced routing configuration and using the router as another DHCP server, when he acted as a wireless switch.

• No internet modem cable grandecom

  I have a Wrt54gs router, a cable modem Ubee DOCSIS 2.0 U10C018. My ISP is grandecom.net.

  I have cloned my pc mac address and can connect to systems of grandecoms with my router. (ie the wan interface to obtain an address of 24.155.x.x)

  I can't connect my internal pc to internet.

  I use a class c internal network 192.168.1.x

  my internal ip address of linksys is 192.168.1.1

  the ubee maybe ping internally in 192.168.100.1

  What should I set my routers gateway?

  I tried 192.168.100.1 and many others. including variations 24.155.x.x

  Any help appreciated.

  Where you found the ip 192.168.100.1 address?

  What is the version of the firmware on your router...?

  The entire network including the router and the modem and check power cycle... If this does not work then, try upgrading the firmware on the router and re - configure the router from scratch.

• Drag & drop doesn't work only in Internet Explorer

  I am no longer able to drag & drop something in Internet Explorer.  I often drag text to a search box or a box on a form.  This feature has stopped working.  As soon as I try to drag text highlighted my cursor becomes a circle with a line through it.
  Thank you.
  DC

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to print a text recognized only without the original images

  I have a scanned PDF with the text recognized by using tools-> Recognize text. But when you print, it remains impressions colors or levels of gray original, even if I want to print only the recognized text. How to do?

  Perhaps someone versed in Acrobat Javascript can build a script to provide a "programmatic."

  I think it would be a non-trival task and therefore not provided free of charge.

  Otherwise, the manual method would be necessary.

  Keep in mind that when ClearScan falls on an image of a character that he does not recognize (so not even a 'suspect' is available) the image of the characters leave as a bitmap image.

  When you slick "background" you can these slick (when present). Find in the printed output would be like finding the needle in a haystack.

  Losing a character can have significant negative implications depending on what is in the content (1.2 seconds becomes 12 seconds).

  The only way to ensure (100%) that what is printed is the scanned image is to print the scanned image.

  Be well...

• Help with an empty space between navigation img roll overs only in Internet Explorer.

  Hello

  Recently, I was able to remove the empty space bugs in IE but it just intrigues me, I was not able to find a solution.  I have empty spaces between my images in my rollover navigation created in dreamweaver.  This is only a problem in Internet Explore.  ANY IDEAS?

  < ! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""

  < head >

  < title > Web Design | Graphic design | San Diego Ca | Print design | Business cards | España Isela < /title > Design Studio

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 ">"

  < style type = "text/css" >

  IMG {}

  border: 0;

  }

  IMG

  {border-style: none;}

  }

  {#Table_01}

  margin: auto;

  min-width: 600px;

  max-width: 2000px;

  overflow: visible;

  }

  background: no-repeat;

  border-top-style: none;

  width: 90%;

  }

  < / style >

  < script type = "text/javascript" >

  <!--

  function MM_swapImgRestore() //v3.0 {}

  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;

  }

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_swapImage() {//v3.0

  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).

  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}

  }

  ->

  < /script >

  < link href = "layout_content.css" rel = "stylesheet" type = "text/css" > "

  < link href = "footer.css" rel = "stylesheet" type = "text/css" > "

  < style type = "text/css" >

  <!--

  TD table tr td {} #footer

  text-align: center;

  color: #AA937A;

  line-height: normal;

  }

  TD tr table th {} #footer

  are-size: 18px;

  color: # 4-7317;

  make-weight: lighter;

  }

  H1 {}

  are-size: 16px;

  color: #830A3B;

  padding-left: 35px;.

  }

  {.pinkletter}

  are-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;

  color: #830A3B;

  text-decoration: none;

  }

  a: link {}

  color: #000;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #850A3D;

  }

  a: hover {}

  text-decoration: none;

  color: #83D91D;

  }

  a: active {}

  text-decoration: none;

  }

  ->

  < / style > < / head >

  "< body bgcolor ="#FFFFFF"background="images/fzm-Canvas.Texture-06.jpg "onLoad =" MM_preloadImages ("images/nav_home_over.png','images/nav_about_over.png','images/n av_services_over.png','images/nav_portfolio_over.png','images/nav_blog_over.png','images/n av_contact_over.png','images/frame_3.jpg'") ' >

  <! - except for the Web Slice (iselaesp.psd) components - >

  < table width = "800" border = "0" align = "center" cellpadding = "0" cellspacing = "0" id = "Table_01" >

  < b >

  < td colspan = "9" >

  < img src = "images/iselaesp_01.png" width = "00" height = "1" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "9" > < img src = "images/iselaesp_02.jpg" width = "1100" height = "299" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "9" >

  < img src = "images/iselaesp_03.png" width = "1100" height = "1" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "7" >

  < img src = "images/iselaesp_04.png" width = "470" height = "1" alt ="" > < table > "

  "< td rowspan ="3"> < a href ="Contact.html"Mm_swapimgrestore" onMouseOver ="MM_swapImage ('nav_contact',", ' images/nav_contact_over.png', 1) "> < img src =" images/iselaesp_05.png "alt ="contact navigation"name ="nav_contact"width ="70"height ="145"border ="0"> < /a > < table >

  "< td rowspan ="4"> < img src ="images/iselaesp_06.png"width ="560"height ="146"alt =" "> < table > < /tr > < tr > < td colspan ="4"> < img src =" images/iselaesp_07.png "width ="320"height ="1"alt =" "> < table >

  "< td rowspan ="3"> < a href ="portfolio.html"Mm_swapimgrestore" onMouseOver ="MM_swapImage ('nav_portfolio',", ' images/nav_portfolio_over.png', 1) "> < img src =" images/iselaesp_08.png "alt ="Portfolio Navigation"name ="nav_portfolio"width ="70"height ="145"border ="0"> < /a > < table >

  "< td rowspan ="3"> < a href ="blog.html"Mm_swapimgrestore" onMouseOver ="MM_swapImage ('nav_blog',", ' images/nav_blog_over.png', 1) "> < img src =" images/iselaesp_09.png "alt ="blog_navigation"name ="nav_blog"width ="74"height ="145"border ="0"> < /a > < table >

  "< td rowspan ="3"> < img src ="images/iselaesp_10.png"width ="6"height ="145"alt =" "> < table > < /tr > < tr > < td rowspan ="2"> < img src =" images/iselaesp_11.png "width ="100"height ="144"alt =" "> < table > < td rowspan ="2"> < a href ="index.html"Mm_swapimgrestore" onMouseOver ="MM_swapImage ('nav_home'") "(,'images/nav_home_over.png',1)" > < img src = "images/nav_home_over.png" alt = "Home Navigation" name = "nav_home" width = height "76" = "144" border = "0" > < /a > < table > < td > < a href = "about.html" Mm_swapimgrestore"onMouseOver =" MM_swapImage ('nav_about', ", ' images/nav_about_over.png', 1)" > < img src = "images/iselaesp_13.png" alt = "about navigation" name = "nav_about" width = height "72" = "143" border = "0" > < /a > < table > "< TD > < a href ="Services.html"Mm_swapimgrestore" onMouseOver ="MM_swapImage ('nav_servvices',", ' images/nav_services_over.png', 1) "> < img src =" images/iselaesp_14.png "alt ="Navigation Services"name ="nav_servvices"width = height"72"="143"border ="0"> < /a > < table >

  < /tr >

  < b >

  < td colspan = "2" >

  < img src = "images/iselaesp_15.png" width = "144" height = "1" alt ="" > < table > "

  < td >

  < img src = "images/iselaesp_16.png" width = "70" height = "1" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "9" > < div id = "layout_content" >

  < p > < span class = "pinkletter" > Isela Espa & ntilde; "a </span > Design Studio is a design studio casual indie chart, which specializes in < a href =" # "Mm_swapimgrestore" onMouseOver = "MM_swapImage ('framework',", ' images/frame_3.jpg', 1) "> < img src =" images/frame_1.jpg' alt = 'framework' name = width of the 'framework' = "396" height = "289" border = "0" align = "right" > < /a > < br / > "

  Web design, logo design and printing services in San Diego, Ca. and all over the world. We < br >

  provide high quality design services at an affordable price. < /p >

  < p > we have a variety of services to meet your needs weither, you are an agent looking for < br >

  in a real estate email flyers or printing real estate hooks-doors, a new small business owner < br >

  looking for a website before store or design web girly. We have something that fits and caters to you. < /p >

  < h1 > Services such as: < / h1 >

  < table width = "705" border = "0" cellspacing = "0" cellpadding = "1" >

  < b >

  < td width = "369" > < ul >

  < li > < a href = "Services.html" > < br > Web of information design ""

  w/social network linking < /a > < /li >

  < /ul > < table >

  < td width = "427" > < ul >

  < li > < a href = "Services.html" > cards < /a > < /li > ""

  < /ul > < table >

  < /tr >

  < b >

  < td > < ul >

  < li > < a href = "Services.html" > creation of Logo & amp; image of brand < /a > < /li >

  < /ul > < table >

  < td > < ul >

  < li > < a href = "Services.html" > door hangers < /a > < /li > ""

  < /ul > < table >

  < /tr >

  < b >

  < td > < ul >

  < li > < a href = "Services.html" > design Blog < /a > < /li >

  < /ul > < table >

  < td > < ul >

  < li > < a href = "Services.html" > Flyers & amp; "" posters < /a > < /li >

  < /ul > < table >

  < /tr >

  < b >

  < td > < ul >

  < li > < a href = "Services.html" > enterprise-product-Headshots photography < br > ""

  Local only ~ Coming soon! < /a > < /li >

  < /ul > < table >

  < td > < ul >

  < li > < a href = "Services.html" > party or a printable event < br > ""

  & amp; email invites

  including social networks < /a > < /li >

  < /ul > < table >

  < /tr >

  < /table >

  < / div > < table >

  < /tr >

  < b >

  < td colspan = "9" >

  < img src = "images/iselaesp_18.png" width = "1100" height = "107" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "9" > < div id = "footer" >

  < table width = "1100" border = "0" cellspacing = "0" cellpadding = "1" >

  < b >

  < th = "351" scope = "col" width > contact us: < /th >

  < th width = "382" scope = "col" > latest projects: < /th >

  < th width = "361" scope = "col" > Social: < /th >

  < /tr >

  < b >

  < td > Mon - Fri 09:00-17:00 < br >

  The < table > Pacific standard

  < td > < p > coming soon check back often < /p >

  < p > < /p > < table >

  " < td > < a href =" "" http://www.Facebook.com/pages/Isela-Espana-Design-Studio/131640063569569?v=Wall "> < img src = images/facebook.png" "width ="59"height ="66"alt ="facebook"> < /a > < a href =" http://www.Dribbble.com/iselaespana "> < img src = images/dribble.png" "width ="57"height ="69"alt ="dribble"> < /a > < a href =" http://iselaespanadesignstudio.wordpress.com/ "> < img src = images/wordpress.png" "width ="53"height ="64"alt ="wordpress"> < /a > < table >

  < /tr >

  < /table >

  < p > copyright & copy; 2010-2011 Isela Espa & ntilde; a < br >

  Let yourself be inspired, but do not steal. All designs, graphics, and content are protected by copyright and cannot not < br >

  be reproduced without the written permission of Isela Espa & ntilde; a Design Studio. < /p >

  < / div > < table >

  < /tr >

  < /table >

  <!--end Save for Web Slice components-->

  < / body >

  < / html >

  IE8 is fine.

  The symptom you describe is only in IE7 and below and is a by-product of another problem.

  In http://www.iselaespanadesignstudio.com/footer.css

  The padding-left in

  table {}
  padding-left: 35px;.
  Width: 1100px;
  }

  is to launch your layout by expanding the master table on the page which in turn the row in the table containing the navigation bar in order to expand the forces and nav buttons spread.

  Try

  table {}
  Width: 1100px;
  }

• Gmail via gtalk is hijacked to open only in Internet Explorer

  When I get alert mail in Gtalk and if I open the mail it opens in Mozilla only. I used 23.0 b version 6. When I upgraded it to 23.0 b7 g maintenance gmail is hijacked to IE even if Mozilla is defined as my browser (default).
  I have deleted23.0 b7 and upgraded to Mozilla 23.0 b8.still the remains.i of problem have you tried all possible modifications and it never helped. I finally decided to turn IE and gmail via gtalk does not open (even in Mozilla).
  What is your suggestion? I think this is a bug in the latest version of Mozilla. Any solution for this.

  Try this

  • https://support.Mozilla.org/en-us/KB/setting-Firefox-default-browser-does-not-work#w_using-your-operating-system

• Satellite X 200-20 s - Windows 7 recognized only two speakers

  After having upgraded to Windows 7 64 bit, but I work notice that the audio driver only recognizes the option "2 speakers", and the subwoofer is no longer. I tried the latest driver from the U.S. site, but still no joy, everyone has found a solution for this?

  NIC

  Hello

  Why you checked Toshiba page we? I searched a bit on the Europe of Toshiba page and there I found your laptop and there you can also download all drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You should try the driver 64 bit Vista from this page. Maybe it will work

  By the way: you have installed the correct version of the BIOS? From Toshiba Web site presents two different versions: one for 32-bit and one for 64-bit.
  Make sure that 64 bit latest BIOS is installed.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!