WRT120N getting only no internet IP through DHCP

Similar Questions

• get internet connection through another computer...

  Hello

  I would go straight to the point :)

  I have a desktop running windows vista. I have a normal internet connection through a router that connects to the internet on this desktop computer.

  now, I also have a laptop with windows xp and here is what I do. my laptop's wireless was always bothers me, sometimes it connects, sometimes it doesn't work out... so I saw that there is an Ethernet card installed in the laptop with an Ethernet port.

  My question is this:

  I have a lot of Ethernet cables at home and I was wondering if there is a way to get internet to my laptop via the Ethernet port on my desktop, but without needing the desktop computer to be running, cause I only use my laptop these days and my router is too far to connect from my room. I hope you understand my problem. In theory, I think it's possible to do, but I'm not sure how, so please help me on this one. my laptop also has firewire, but I prefer ethernet for some reason any.

  Thank you

  Hello

  Sorry, but you cannot get a connection via another computer if the computer is off.

  I'm not sure that I understand completely the topology.  However, if the office is connected by cable to a router for Internet connection, you can solve the problem by buying a simple network switch.

  You take the cable from the desktop and connect to the switch. Then you plug the desktop and laptop computer at the switch.

  That this switch network does, it divides a cable to feed many computers.

  Example of a switch that can be connected with a cable to a router and feed 5 computers.

  http://www.Newegg.com/product/product.aspx?item=N82E16833166034-

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I have an internet connection 100M but getting only 30 M wireless

  I have the internet connection of 100 M but getting only 30 M wireless.  How to increase the speed?

  Turning off time Capsule

  Turning your Mac off

  Locate your Mac... about 9-10 feet or 3 metres from the time Capsule to clear line of sight between the Mac and the Time Capsule

  Turn on the time Capsule and let it run for a minute

  Turn on the Mac and let it run for a minute

  Check the speed once again using a site like www.speedtest.net and report on your results.  (Do NOT use an iPhone or iPad to check wireless speeds.)

• I can't get my Powerpoint to view through the projector. It only shows my office.

  I can't get my Powerpoint to view through the projector. It only shows the desktop image and not my slides.

  You have mirrored screen checked? If this isn't the case, you must drag the PowerPoint window on the desktop appears on the projector.

• I get this message - internet Explorer - data execution prevention has stopped the program

  I get this message - internet exployer - data execution prevention has stopped the program and it freezes

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• Get only the Apple logo on my iPhone 5 s

  I get only the Apple logo on the iPhone 5 s.  Tried to update and restore through iTunes but it would not be completed that.

  Hello

  On the computer, make sure that iTunes is up to date.

  Mac

  1. Open iTunes.
  2. In the MenuBar at the top of your computer screen, choose iTunes > check for the updates.
  3. Follow the prompts to install the latest version.

  Windows

  1. Open iTunes.
  2. In the MenuBar at the top of the iTunes window, choose Help > check for updates. Learn what to do If you see not the menu bar.
  3. Follow the prompts to install the latest version.

• iPhone not recognizing only no internet after installing the new cable router attached to the Airport Express Terminal.

  My configuration is modem cable to Airport Express which is connected wireless to a Time Capsule.  I am able to surf with my laptop, it's the iPhone 5 s is no longer is grateful for the internet.

  When I turn off the wifi on the iPhone, Airport utility displays only the Internet icon with the green light. The cable modem has no possibilities of wifi so I do not understand to THE.

  When I turn on wifi, the wifi devices present with green lights and the internet shows a yellow light.

  Through the different ways for a solution.  Power cycling my net and telephone.  Forget this network don't forget the password and I have to choose the wifi and enter a password. Still seeing internet.

  Why should you have the Airport Express? The Capsule is also a WiFi router.

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Overview of the images by getting only.

  Ive just made a complete analysis. problems have been detected and removed, but Ive always had this problem. When I open my email or open internet I get only the outline of the images.

  If I keep repeating the action it will correctly open a few times. I tried to change settings but to no avail. Help, please!

  What did you do a full scan with?

  Please download and install Malwarebytes Anti-malware (free version) www.malwarebytes.org and update and run a full scan (DO NOT enable the option of real-time protection!) in your main account and quick scans in all other user accounts.

  Remove what it finds

  Then go to Internet Options, click the Advanced tab.

  Click the restore advanced settings. Click on apply

  Click the Security tab, click the "Reset all zones to default level" button and click on apply.

  Out OK and restart.

  now test and post back with the results and more information.

  What OS, what browser?

  What AV?

  What other security software is installed?

  Have you ever used a "registry cleaner"? (NE)

• I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  I have these multiple .exe running on my registry? security of wireless modem?

  I have 2 questions:

  1. I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  2. I think that someone is due to ghosting my PC. On my registry, I have 2 of the following: iexplore.exe attributed to administrator. Then I have an explorer.exe attributed to administrator. I have 6 svchost.exe running 2 assigned the Local, 2 assigned to network service and 2 running service attributed to the system. Can anyone provide an answer why I have these multiples, exe running on my registry?

  Thank you very much

  GreenGiant

  Hello
   
  Yes, it is possible to gain access to your computer; but not without your permission. The firewall on the computer prevents any unauthorized entry. Refer to the following articles.
   
  What is a firewall?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall
   
  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
   
  How will I know if a wireless network is secure?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure
   
  When you say "Record" do you mean "Services" in the Windows Task Manager. Its common to have these processes or services to run in the background.

  'iexplore.exe' means 'Internet Explorer'.

  'explorer.exe' means 'Windows Explorer'.

   

  What is svchost.exe?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Svchost-exe

   

  You can scan your computer with MSE to check the virus or malware if it affects your performance.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• I get only a skeleton display when I go online, why? everyone has an easy to follow the answer

  I get only a skeleton display when I go online, why? everyone has an easy to follow the answer

  Hello

  1. is this issue happening with a particular Web site? If Yes, then which is the Web site?
  2. what browser do you use to go online? If you use Internet explore, then what version of Internet Explore do you use?
  3. you receive an error message when you try to go online?
  4. have you made changes on the computer before this problem?
  If you use Internet explore, you can read the following article.
  The video problems when you use Internet Explorer
  http://support.Microsoft.com/kb/2532294

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   
   
  You can also provide us with the screenshot of the screen, when you sign in. See the following link on how to do i: after a screen shot on this forum?
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/take-a-screen-shot
  Here are the steps to upload a screenshot:
  (a) on the private domain of my post, click download file.
  (b) click on select.
  (c) navigate to where the download file is saved on your computer and click on submit.
   

• Windows CE 6.0 on netbook - cannot get on the internet w/wifi or w/sprint aircard.

  I bought a netbook 7 "which has the Windows CE 6.0 operating system.  I can't get on the internet OS w / this to the free wifi locations (like McDonald's).  In addition, the difficulties to find an aircard (card mobile broadband) which is compatible OS w / this.  My cell provider is Sprint, & they have not.   Ideas or suggestions (a constructive nature, please).  Do you know another aircard, wifi device that I could use to access the internet?   Thank you.

  I tried to find a networking forum on Windows CE 6.0 on the Windows site, but could only access XP, Vista, Windows 7, & forums.

  Ditto. As far as I KNOW, it is not all the specific windows of THIS forums for answers. And I couldn't find anything other than the specific developer forums in theMicrosoft forums (for example,http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact, http://social.msdn.Microsoft.com/forums/en-US/windowsmobiledev/threads).

  Maybe the manufucturer provides community instances appropriate for users of devices?

  In any case it really has nothing to do with Internet Explorer. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 6224 does not get to the internet on vlan-111

  Unable to get to the internet, ran tracert, and when it does respond it shows 192.168.98.254 as next hop.  not good.
  

  On switch port 8 is vlan-1  management port   192.168.2.0/24
  

  on switch port 5 is vlan-111  end-users             192.168.111.0/24
  

  on switch port 21 is vlan-98  Mitel voip phones  (not active yet)    192.168.98.0/24
  

  Unable to get to the internet when on a Win2k8R2 server on switch port 5 vlan-111
  

  running-config                                                                 !Current Configuration:!System Description "PowerConnect 6224, 3.3.1.10, VxWorks 6.5"!System Software Version 3.3.1.10!Cut-through mode is configured as disabled!configurevlan databasevlan 98,111vlan routing 98 1vlan routing 111 2exitsnmp-server location ""snmp-server contact ""hostname "TS-1"stackmember 1 1exitip address 192.168.2.1 255.255.255.0ip default-gateway 192.168.2.254ip domain-name xxxxxx.netip name-server 192.168.111.2ip name-server 216.136.95.2ip host fs-bafb01 192.168.111.2ip host ln-bafb 192.168.111.3ip host tl-bafb 192.168.111.4ip routingip route 0.0.0.0 0.0.0.0 192.168.111.1interface vlan 98name "MITEL"routingip address 192.168.98.254 255.255.255.0exitinterface vlan 111name "111-END-USERS"routingip address 192.168.111.254 255.255.255.0exitusername "admin" password fd358f7bed5ecdd318abe6b925e513cc level 15 encryptedvoice vlandhcp l2relay!interface ethernet 1/g1switchport voice detect autodescription 'To_SRX220'switchport access vlan 111exit!interface ethernet 1/g2switchport voice detect autodescription 'To_TS3_Port26'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g3switchport voice detect autodescription 'To_MITEL_SYSTEM'switchport access vlan 98switchport forbidden vlan add 111voice vlan 98exit!interface ethernet 1/g4switchport voice detect autodescription 'To_TS2_Port26'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g5switchport voice detect autoswitchport access vlan 111exit!interface ethernet 1/g6switchport voice detect autodescription 'To_LN_BAFB_ETH0'switchport access vlan 111exit!interface ethernet 1/g7switchport voice detect autodescription 'To_TL__PortETH0'switchport access vlan 111switchport forbidden vlan add 98exit!interface ethernet 1/g8switchport voice detect autoexit!interface ethernet 1/g9switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g10switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g11switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g12switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g13switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g14switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g15switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g16switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g17switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g18switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g19switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 98,111 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g20switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 98,111 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g21switchport voice detect autodescription 'To_FS__Port_ETH01_VLAN98'switchport access vlan 98exit!interface ethernet 1/g22no negotiationspeed 10switchport voice detect autodescription 'To_T4_Port10'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g23no negotiationspeed 10switchport voice detect autodescription 'To_W7_Port10'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g24no negotiationspeed 10switchport voice detect autodescription 'To_W6_Port10'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/xg1switchport voice detect autoexit!interface ethernet 1/xg2switchport voice detect autoexit!interface ethernet 1/xg3switchport voice detect autoexit!interface ethernet 1/xg4switchport voice detect autoexit!interface port-channel 1switchport voice detect autoexit!interface port-channel 2switchport voice detect autoexit!interface port-channel 3switchport voice detect autoexit!interface port-channel 4switchport voice detect autoexit!interface port-channel 5switchport voice detect autoexit!interface port-channel 6switchport voice detect autoexit!interface port-channel 7switchport voice detect autoexit!interface port-channel 8switchport voice detect autoexit!interface port-channel 9switchport voice detect autoexit!interface port-channel 10switchport voice detect autoexit!interface port-channel 11switchport voice detect autoexit!interface port-channel 12switchport voice detect autoexit!interface port-channel 13switchport voice detect autoexit!interface port-channel 14switchport voice detect autoexit!interface port-channel 15switchport voice detect autoexit!interface port-channel 16switchport voice detect autoexit!interface port-channel 17switchport voice detect autoexit!interface port-channel 18switchport voice detect autoexit!interface port-channel 19switchport voice detect autoexit!interface port-channel 20switchport voice detect autoexit!interface port-channel 21switchport voice detect autoexit!interface port-channel 22switchport voice detect autoexit!interface port-channel 23switchport voice detect autoexit!interface port-channel 24switchport voice detect autoexit!interface port-channel 25switchport voice detect autoexit!interface port-channel 26switchport voice detect autoexit!interface port-channel 27switchport voice detect autoexit!interface port-channel 28switchport voice detect autoexit!interface port-channel 29switchport voice detect autoexit!interface port-channel 30switchport voice detect autoexit!interface port-channel 31switchport voice detect autoexit!interface port-channel 32switchport voice detect autoexit!interface port-channel 33switchport voice detect autoexit!interface port-channel 34switchport voice detect autoexit!interface port-channel 35switchport voice detect autoexit!interface port-channel 36switchport voice detect autoexit!interface port-channel 37switchport voice detect autoexit!interface port-channel 38switchport voice detect autoexit!interface port-channel 39switchport voice detect autoexit!interface port-channel 40switchport voice detect autoexit!interface port-channel 41switchport voice detect autoexit!interface port-channel 42switchport voice detect autoexit!interface port-channel 43switchport voice detect autoexit!interface port-channel 44switchport voice detect autoexit!interface port-channel 45switchport voice detect autoexit!interface port-channel 46switchport voice detect autoexit!interface port-channel 47switchport voice detect autoexit!interface port-channel 48switchport voice detect autoexitsnmp-server community public ro ipaddress 192.168.111.9exit
  

  I didn't imply that you need another switch.  In my example of switch 2 is your firewall.

• Internet connection through different VLAN

  Could someone help me here please.

  Have a cisco SG500 2 (mode layer 3) configured with 3 VLAN connected to a modem adsl (Trendnet) - vlan voice 1 data, vlan 2, vlan 3 tests.  Routing between VLANs is ok I can ping any device in any vlan and have access to the internet through the vlan 1 but no internet access on the other vlan is the vlan 2 and 3. No ping to adsl, if I plugged in a device in the vlan 2 or 3. My question is do I have a router or firewall in order to provide internet access through all my VLAN or is it possible with the SG500 connected to adsl? a turn on ip Routing and the default route in my SG500, but still no luck. need internet connection for the PC as well as voip devices.

  Thank you

  Hi Paul, the switch performs no NAT function so if your modem is only a modem giving public IP addresses then you would need a router to support the NAT function and support the vlan or the static routes.

  If your modem works as a router, need you a static route on the modem to point to the SVI to the switch to allow the clients of vlan connection to connect to the modem to turn, what makes the internet work.

  -Tom
  Please mark replied messages useful