TCP/IPv4 properties

Similar Questions

• How can I activate the TCP/IPv4 properties button?

  Hello everyone, I am trying to solve a problem on my Windows 7 netbook. When I run ipconfig he returned only this line "IP Configuration of Windows" with later data. When I go to the wireless adapter and select Protocol Internet Version 4 (TCP/IPv4), the properties button is disabled. I unchecked the IPv6 checkbox. The wireless adapter is connected to the WiFi hotspot, but the status is not 'connected' for IPv4 and IPv6 connectivity connectivity. I already used the netsh command to reset the interfaces by this link ( http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/tcpipv4-properties-button-disabled/347899fa-b60a-40a3-ad2c-78ef5e0dca37 ). I also have the same problem with my Wired NETWORK card. Please can someone configure me this adapter to get a static IPv4 address or via DHCP?

  -Also reset the TCP/IP stack via (http://support.microsoft.com/kb/299357?wa=wsignin1.0#letmefixit )

  -Also tried re-installing the drivers (http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/the-tcp-ip-v4-protocol-for-the-built-in-wireless/a28c5096-d1c4-4cc4-ab56-236a163e3a96 )

  I had the same problem.

  I noticed that the button of properties available on the network security mode. So I started to disable suspicious services then I found the problem: his "Service to safety nut.

  Doing some research, I discovered that it comes with adware 'Movies Toolbar'. Even if you uninstall the "Toolbar Movies", "The safety nut" always running.

  To uninstall it just open services.msc, double click on 'Service of safety nut' and change the Startup Type to disable, and then restart Windows. When Windows are online again, the button of properties will be available and the safety nut will no longer appear on the services.

  It will be useful.

• How to static ip configuration for computer laptop windows 7 ultimate 32 bit on area (locked setting ip Tcp/Ipv4 properties)

  My English is not good. I often meet customer mobile computer'customer use window 7 ultimate up field (not the working groups). They want to connect to the internet to work. These computer' laptop computer customer being locked setting properties ip address it guy in place they work. So I can't open affecting properties connection - Local static configuration network ip for them to connect internet work. ?
  Please help me. Thanks a lot of.

  Hi Trong,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• No TCP/IPv4 under my network connection properties

  Today, that I had the problem of wake up and find myself unable to connect to the internet, currently limited connectivity and I have not had this problem before, I decided to spend several hours frustrating myself trying to fix it and then I realized that under my properties of the Wi - Fi, I do not have a TCP/IPv4 I tried to reset under cmd but when I do I get an echo of reset request failed, basically does anyone know how I can enter my wireless network properties ipv4?
  Just remember forgot to mention im running vista home premium SP2.

  Run system restore to return to a time before the problem occurred. Boulder computer Maven
  Most Microsoft Valuable Professional

• Properties TCP/IPv4 button disabled...?

  Hello
  I have searched for a solution for over a week now and have found nothing to answer this question.

  I am trying to configure my Ethernet card, but the 'Properties' button to the 'Internet Protocol Version 4' element (TCP/IPv4) is disabled (grayed Out)... and I cannot understand why.

  The Ethernet card is enabled and it is actually connected to my university network.
  I am able to use the internet through it, as I currently do.

  I don't have that one adapter installed, nothing else appears in the "Network connections" box of "Control Panel."

  I am "Windows 7 Professional" and tried to find the differences between my PC and the other 2 PC running the same operating system still have been unable to do.

  Any help would be greatly appreciated.

  Hello

  It could be that IPv6 is enabled and supported by the network.

  Scan your computer and make sure that it is clean of viruses and malware.

  Next, try this.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• LLTP responder and TCP/IPv4 for SP3 upgrade

  I downloaded SP3... and it works very well... but it has not installed perturb or TCP/IPV4... I tried to install the perturb topology after you install SP3, but because I have already installed SP3, Microsoft say I don't need to install the perturb topology... So I'm puzzled!

  What can I please!

  Edit...  Can I somehow install topology perturb, (KB file) separately without removing SP3... That would be my preferred method...

  Thanks in advance

  See you soon

  The perturb topology LLTD Responder (Discovery) for Windows XP SP3 is available for download here .

  TCP/IPv4 is a standard part of all versions of Windows XP, and it appears in the connection network under Internet Protocol (TCP/IP) properties.  If you have access to your local network or Internet, IPv4 is installed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• TCP/IPv4 obtain DNS automatically

  Hi all

  I have my router configured to use dns to opendns servers, and everything works fine except for my desktop under Vista SP3 PC.

  I have my router set up because of the IP based on MAC addresses, so I have the TCP/IPv4 set to obtain an IP and DNS address automatically.

  My problem is the PC of Office Watch reset itself and registering an address in the DNS server box. How do I delete these addresses and force it to Auto adjust.

  I don't really want to put in the openDNS servers, in case I decide to go back to my ISP servers. I prefer to keep auto and make the changes on the router.

  It becomes very frustrating to have to keep resetting.

  Go to start / Control Panel / Internet Options / connections / select the connection and click settings.  Click on properties and go to work in network and select TCP/IPv4.  Under TCP/IPv4, select properties and make sure that the first page says get an address of DNS server automatically.  Click Advanced and then click DNS.  Make sure that the only two boxes checked are Append primary and Suffixes connection specific DNS and add relatives of the main DNS - nothing else suffix suffixes.  Click OK and save this.  This should solve the problem.  But I suspect that you already did (probably several times) so let's move on.

  The only other option that I can think of is to reset the TCP/IP stack that can get rid of the incorrect addresses and run and fresh with the correct settings.  Here is the procedure:http://geekswithblogs.net/mattcampbell/archive/2007/09/30/Resetting-your-whole-IP-stack-in-Vista.aspx.  I don't know if this will help, but if you are having problems with TCP/IP, it is one way that many people use to solve.  Then you will need to reconfigure the TCP/IP settings and then you can see if that does the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't access TCP/IPv4

  Hello

  When I double click on TCP/IPv4, it does not open. I can't even click on properties, when I click on install---> Protocol, it displays a message: access is denied.

  Help please

  I saw at least a similar situation which was fixed by running a full scan with MalwareBytes AntiMalware.

  Download, install, update and run MBAM and report results.  https://www.Malwarebytes.org/

  Use the free version, not the free trial of the pro"" version.  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

• Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

  Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

  Hi all

  I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)
  A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:
  STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)
  AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801
  I couldn't find anyone with the same problems. Can you help me?
  Thanks in advance,
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• Not able to click on internet protocol version 4 (TCP/IPv4) it does not open.

  Original title: about ipv4.

  I could not click on internet protocol version 4 (TCP/IPv4). I want to put the mannul ip but I can't do because of what is not open by clicking. y at - it a solution? Please give me answer fast as you can.

  Try this:

  Go to start-> type cmd-> right-click on->, click run as administrator. Click Yes, if UAC prompts. Then, type the following commands and press ENTER after each command:

  netsh winsock reset

  netsh interface ipv4 reset

  ipconfig/flushdns

  Finally, restart the PC and then check.

• to disable TCP / IPv4 on window 7

  I want to disable tcp /ipv4 on some computer don't not to access Internet

  but you need to connect to the local network.

  Just remove default gateway while maintaining the lan ip address as it is...

  

  The gateway it the thing that confuses wants external to the internet...

• No Internet TCP/IP protocol properties

  Hi Sir,

  I have a HP Pavilion dv4, properties tcp/ipv4 is disable, I'm unable to set the IP address,

  Please I need your help.

  Thank you

  Hi @SamirSaber ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your TC / IPV4 is disabled and you cannot configure IP addresses.

  Here is a link to a YouTube video that provides 4 methods to try to resolve this problem.

  How to fix tcp ipv4 properties button disabled (gray)

  Here is a Windows document to help you also. Change TCP/IP settings

  Here is a link on the Microsoft answer forum which can also help.

  Properties TCP/IPv4 button disabled...?

  I hope this helps.

• Reset TCP/IP v4 DNS guard!

  I want to set to automatically obtain DNS my TCP/IPv4 properties. However when I check the box it works for so long and then resets and seizes the addresses in the DNS address areas.

  How can I delete these addresses and get it to 'paste' in automatic mode?

  Thank you

  Try resetting TCP/IP: http://support.microsoft.com/kb/299357.  Make sure that you take note of the appropriate settings before doing this so that you can restore when it in fact.  This should remove all stored DNS addresses there and then they hopefullly will not be able to come back and you won't get them automatically.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My local network works, but why I can't ping? LAN works but not internet. A simple quest to the Jedi.

  Hi all!

  I have weird problem and I hope some of you can enlighten us if necessary.

  The background:

  My OS is Windows Vista Home Premium SP 2.   One day, I installed an application proxy - ProxyCap - as a free trial for 30 days.  The application installed a few dll Winsock provider.  After the 30 day trial, I uninstalled the app.  Then the problems started.  Even if the application proxy has been disabled, regular internet links have been completely normal and not affected.  It was only after uninstalling the app that I have problems.

  The problem:

  • The computer is unable to connect one more to any website using the browser.
  • My local network seems to be fully functional, which involves a problem of setting the software.  I say that my LAN is functional if I am going to sign--> Network and Sharing Center--> view status and look under the "Activity" section, I see the link send and receive packets without problem.
  • If I go into control panel of--> Network and Sharing Center--> view status of--> diagnosis, I get the message: "cannot communicate with DNS Server (xxx.xx.xxx.xxx) Network Diagnostics ping to the remote host, but has not received a response."
  • Indeed, if go to start--> cmd and ping my DNS server, I get a general failure for all 4 packets sent.
  • However, I am able to ping my localhost to 127.0.0.1

  My settings:

  • My ipconfig/all output: http://pastebin.com/Ksn2k2ja
  • DHCP is enabled.
  • For the properties of connection LAN--> Internet Protocol Version 4 (TCP/IPv4)--> properties, I 'IP automatically get an address' and "Obtain DNS server address automatically" selected.
  • The same goes for--> Internet Protocol Version 6 (TCP/IPv6)--> properties.
  • The Sysinternal autoruns--> tab providers Winsock application, tells me that I have the "Hello Namespace Provider' active as a WinSock2 registry entry. It is mdnsNSP.dll and published by Apple Inc..  Who was present before installation of the proxy, and this is for iTunes.  Screenshot: http://i1300.photobucket.com/albums/ag86/applemeetworm/winsock_zpsb41ca872.jpg

  What I tried:

  • I tried to reset Winsock for Vista by clicking Start--> cmd and type netsh winsock reset , and restart the computer.
  • I tried to reset the TCP/IP stack by clicking Start--> cmd and type netsh int ip reset c:\resetlog.txt and restart the computer.
  • Restart my router.
  • Deactivation and activation then my connection to the local network.

  Thank you all for helping me with my problem.  I would be happy to provide more information as needed.  Thanks for the research and thanks offering solutions.

  See you soon!

  Hi all!

  I contacted ProxyCap and support staff has been able to solve the problem.

  Apparently, one of my entries in registry Winsock2 (Winsock2, Namespace Catalog5, 5 catalog entries) has been disabled somehow, uninstalling or in my first attempts to address issues after uninstall.

  Thanks to ProxyCap and for other people who have tried to help.

  ~ Congratulations ~.

• Computer shows it's connected, but unable to connect to the Internet

  Original title: also connected but unable to connect

  I have a HP Pavilion a1710n 64 Dual Core Processor running Windows Vista Home Premium.

  The computer shows that I am connected to the internet, but I can't connect to IE or firefox.

  My Internet Protocol Version4(TCP/IPv4) properties shows that the two buttons marked for obtain an IP address automatically as well as the use the following DNS server address.

  My network card is NVIDIA 10/100/1000 Mbit / s, and the computer shows that it works correctly. I tried to do a back roller and re - put to date but still the two marked buttons.

  Large number of background information...

  I was trying to understand why the windows installer did not work on my son's account. I went in systems and changed to start and automatic manual. Rebooted PC and the firewall do not come. Tried to do a restore, but failed and lost all my restore points.

  At this point, I lost my internet connection to know after vainly trying to figure out the problem I contacted an ATT(my internet server) of things ATT me had to do was change the properties to get the use of a DNS server address automatically and had typing me the address. After reviewing the many things ATT concluded there was not a problem with my connection and the PC is configured correctly and suggested that I should speak to technical support and of course, it was not free.

  Tech support determined there was something that crashes me to connect to the internet and had run me malwarebytes. He detected 24 traces of adware and 2 traces of a virus in the registry database. I deleted everything and still no connection to the internet. Next Tech had me run Combofix and says everything should run fine after that. Still no connection to know Tech # 3 had executed me guests of orders with ping commands. Finally, he had me check the auto config button and that's where I discovered the two buttons were lit. Tech said "can't be." Well it is. That's when I tried to roll back the driver, but no luck so tech says only option is to restore the whole system.

  GRRRR... After several internet searches that I'm about to do except nothings saved and whenever I try to use my backup and restore fails.

  Any help would be appreciated. I'm still fairly new to PCs so please be patient with me. Laughing out loud

  I know that my options have been counted, I was able to save what was important and made a full system recovery. I am happy to say that I'm back on the internet.

  Thank you very much for your help and support. I learned a lot on my computer, as well in location wonderful are the microsoft forums :)