TE2100 poster error e/s with 40 GB HARD drive

Similar Questions

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• Satellite U840W - replacement SSD with current hybrid HARD drive

  I have this model U840W with a hybrid HARD drive (500 GB + 32 GB SSD cache), I would like to replace it with an mSATA SSD. My warranty is left about 2 months... I understand that if I open the bottom cover, the guarantee may be cancelled.

  Read the following thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68779

  What I don't understand is the "live in the mid under foot rubber", what is the best way to remove it? This seems to be the real challenge. A directive (preferably with photos)?

  Thanks in adv!

  Hello

  I wouldn't recommend allows you to replace the hybrid HARD drive on your own even if hand warranty isn't valid anymore.
  Why?
  Because the after replacing a drive HARD or SSD, RAID and TSRI (quick start of Intel technology) mode will not be available.

  To rebuild the factory RAID mode and allow the TSRI, special tools are needed and this can be done by the authorized Toshiba maintainer.

  So even if you would be able to remove the bottom cover and hybrids of HARD drive, the new inserted SSD would not be able to achieve the best performance.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• The macbook pro is provided with an external hard drive?

  It comes with an external hard drive in the finder, or you buy one?

  It has an internal hard drive, but not an external one.

  (140751)

• Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  No. Windows cannot be installed on an external drive, or start from a.

• Satellite A100 - 065 (PSAANA) - can I spend it with a SATA2 HARD drive?

  Hello Forum!

  I want to upgrade to a hard disk of 120 GB (Hitachi) to a 500 GB (Western Digital). I don't know if this A100 supports SATA2.

  I think it's to do with the hard disk controllers that are on the motherboard. This is information I don't think (using the pc Wizard). I am very happy to use a SATA drive, if it is the one which is compatible, but if it supports SATA 2, then obviously I would install a because they are 3GB of bandwidth instead of 1.5 GB as SATA.

  Any help would be greatly appreciated that my hard drive is full.

  Thanks in advance.

  Hello

  You can use a SATA2 HDD without problems. These discs hard are compatible downgrade to the old SATA1 standard, so you can use 500 GB HARD drive, as you suggested.
  But don t forget it will not work with SATA1 speeds, but this should not be a problem normally.

  So have fun with the new HARD drive! ;)

  Good bye

• Code 8 with a corrupted hard drive?

  I did an analysis of the utility disk system and returned with a corrupted hard drive that needs to be repaired. As well as a Code of 8.  What does that mean? Do I need a new hard drive? Or can it be fixed?

  see this article and proceed according to Apple.

  https://support.Apple.com/en-us/HT201639

  It is also strongly recommended that you back up the disk as soon as POSSIBLE if you do not want to replace.

  Use Time Machine to back up or restore your Mac - Apple Support

• Acer Aspire TimelineX 1830 68U118-t with a new hard drive. How can I get the bluetooth to work?

  I have an Acer Aspire TimelineX 1830 t-68U118.  The original hard drive died, so I replaced it with a new hard drive.  I loaded Windows 7 x 64 and loaded the chipset drivers and the network drivers.  The laptop is always my bluetooth equipment (even if I loaded the drivers Atheros).  Does anyone else have this problem?  How can I get the bluetooth to work?

  It would probably depend on the status of the warranty of the system.

  You must contact the service for options.

• Synchronize folders with an external hard drive.

  Can anyone help? I want to be able to sync my library and office with an external hard drive (Freecom on USB) files.  The goal is to be able to maintain an up to the minute backup of all my files, so that the next time my hard drive failure I have to absolutely all backed up. I am aware that that is not only the problem of accidental deletion of files so periodically I will also manually save the backup to a different folder on the same hard drive, or is it also possible to get windows to schedule this backup type automatically)? Or y at - it another way to achieve this level of security of the files without a mirror raid arrays (or spend more money on hardware or software)?

  Try this:

  MS SyncToy

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C26EFA36-98E0-4EE9-A7C5-98D0592D8C52&displaylang=en

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  This is due to files not movable, scattered in open spaces.  Windows Disk Manager has a few limitations... You can use a thrid party as EaseUS Partition Master Free Edition 9.2.2 freeware utility

  Its very easy to use and you can be dragged and resized your drive...

• Replace an ATA with a SATA hard drive

  I have a Pavilion dv9000 Laptop. My hard drive gets full. Is someone can you please tell me if I can replace the ATA hard drive with a SATA hard drive.

  Not sure where you are seeng anything ATA hard disk. Your page Specs here makes no distinction in one way or another, but the Service manual here specifies SATA hdd.

• To edit first with different computers, with an external hard drive

  Is it possible to have several editors work with an external hard drive in cs6 first so that when the external drive is reconnected to a different computer that the files do not have to be reconnected. It seems that every time that the hard drive is open on another computer, it loses track of where the files are located and we spend a moment to reconnect them.

  Just check that the drive letter of the disk is the same for all computers.

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer