Tecra 8200: Question about replacing the 14.1 screen

Similar Questions

• Question about replacing the battery in Aspire E15 E5 - 574 G

  So, I bought an Aspire E 15 E5 - 574G from newegg because I need a new laptop and did not want to spend a lot of money. What never occurred to me until after that I paid because it was the battery was replaceable, further research after that newegg delivered to me, I discovered that it wasn't. I wonder if someone could tell me if the battery goes bad can I send the computer to acer and I got the fixed battery or I'll essentially having to buy a new laptop when he dies. I need a laptop with a battery that is replaceable, because I handle my machine a lot, if the battery is really not replaceable reliable, so I was wondering if I should ship the computer to newegg a refund and look for a computer acer laptop with a battery that I can replace.

  Thanks for any help

  First thing, you need to check, the laptop that you bought from Newegg is under warranty or not. To help you check this, please find the link given below and enter the computer laptop serial number of product on the area of warranty status:
  http://www.Acer.com/AC/en/SG/content/SG-check-product-warranty-expiry

  If it is under warranty, you can request a replacement battery, please find the link below to contact Acer's Support Center:
  http://www.Acer.com/worldwide/support/

  If the laptop is not under warranty, it is recommended to approach Newegg to replace the laptop.

  If you are considering buying a new laptop, it is suggested to buy HP, Lenovo or any top brand laptop Acer configuration according to your choice.

  Hope this will help you.

• 2400-103: question about replacing the HARD drive

  I'm trying to figure out how to replace my laptop HD. It is of a Satellite 2400-103. The HD is broken. I got it removed, but I'm not sure what to replace it with. Maybe a Toshiba MK - 3021 GAS, what can I get away with? Can I get a more general e.g. 40 GB storage device? Can I use a SATA device?
  The broken HD that came out is a Hitachi DK23DA-30F, but I find it difficult to find a local supplier of this exact model.

  Help, please.

  Hi guy,

  Your original drive is a 30 GB device, so you can replace it with a similar model from a different manufacturer and at the same time, to increase capacity (any where up to 80 GB should be fine according to your needs). I replaced my 30 GB with a Toshiba MK8025GAS drive there are many moons with no problems.

  One thing to know the rotation speed. Your Hitach1 drive is 4 200 rpm and you could in theory use a disk with a faster rotation (5 400 or 7 200 RPM), but this can generate excessive heat when using a lot of the hard disk activity.

  Kind regards

• Tecra A4: Question about HARD drive replacement

  I have a Toshiba Tecra A4. Can someone tell me where I can find instructions to remove the HARD drive?

  Hi Niek

  As much as I know replacing the HARD drive is not complicated.
  The HARD drive slot is placed at the bottom of the unit.
  You will find a HARD drive cover is fixed with a screw.
  Please remove this screw and remove the cover.
  Then you can remove the HARD drive attention.

  PS: I think that the HARD drive is placed in the chassis. You may also remove this framework to place the other HARD drive.

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Question about replacement for the P100 broadcast Pro motherboard

  I bought a satellite Pro P100 August 1, 2007 in the United Kingdom.
  Thursday, August 21, went to the turning on and nothing.
  I'm in Malta and took the laptop for the dealer to be informed the next day motherboad was interrupted and must be replaced.
  The laptop is only 3 weeks old, how many others have found the motherboard to go so fast?
  Should I trust this laptop or can I request a replacement?
  If the motherboard is replaced, the operating system must be reinstalled and all of the following software?
  We are in the business of yacht charter and need Windows XP Professional installed to be compatible with our navigation and weather software.
  Any comments welcome.
  Sue Clarke

  If the machine is only 3 weeks and then bring/send it to the next service partner available because you still have a warranty on this machine. And why it s going down so fast - we will be able to answer that. The machine you have is very reliable, so maybe just a "Sunday" - machine if you know what I mean.
  In this case, you have a guarantee, and you should use it and require replacement.

  After the replacement of Don t you need to reinstall anything since only a part is exchanged and nothing significant on your system will be changed.

  Welcome and good luck

• Tecra A2 - Question about the different stacks

  You have a problem with getting a new battery for a Tecra A2 PTA20A 20R002. The battery that came out of the laptop is a PA3356U-2BAS. Product Toshiba says that the battery is a PA3356U-1BAS or PA3357U-1BAL (high capacity).

  Is the PA3356U-1BAS PA3356U-2BAS and PA3356U-3BAS (incidentally)?

  Also can I can use PA3357U-3BAL instead of the PA3357U-1BAL?

  I find it difficult to source the battery the numbers indicated on the technical specifications of Toshiba in Australia (can't find compatibiles). PA3357U-3BAL seems to be pretty easy to find.

  Thank you

  Andrew

  Very interesting! :)

  Thanks for this feedback!

• Tecra 8000: questions about memory, mouse and screen

  Hi, im using a tecra 8200, mouse keeps drifting upward left after 30 minutes? keyboard problem?
  Sometimes the screen displays changr, from very dark then normal?
  Finally I was told that I can put in a module of 512 mem alongside 256 existing will this work.
  Thanks for any reply Biffo

  Hello

  As you know on this path it is not easy to give you a good answer on all these problems. The same happen to me with my mouse, but AFAIK it's normal because the mouse must obviously be calibrated again and again.

  Daniel is right about the memory. You can use two modules with 256 MB (PC100 256 MB - PA3069U - 1 M 25). 512 MB should be max according to the specifications of this unit.

  Good bye

• Equium P300-190 - Question about upgrading the processor

  Hello

  I just have a question for my CPU PC Toshiba laptop, I have a can of Equium P300-190 full to give model number if necessary the cpu is one supplied with the laptop.

  My question is I want to upgrade the processor but do not know which would be the best option and there are limits with the BIOS, etc. on board.

  Any help would be greatly appreciated.

  Probably it is not known to you that upgrading the CPU is not officially supported by the manufacturers of portable.

  The CPU upgrade is a tricky thing... the fact is that the CPU must be supported by chipset and BIOS.
  Where a party would not support the new processor, the unit will not light.

  So even if you use a CPU that is supported by the chipset (Intel GM965) there is a risk that the BIOS could not support the new processor...

  The laptop was equipped with processor Intel Pentium Dual-Core processor T2390 (Merom code name) probably the other CPU Intel Pentium Dual-Core family-owned would be compatible, but to be honest, you won't see a performance improvement...

  So in my opinion it is not worth trying to upgrade the processor...

  In my opinion, you need to replace the HARD drive with an SSD... in that case you will get the performance improvement...

• HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

  Recently, I messed up my CPU and bought a replacement (exact same kind). I am running windows 7 ultimate and for about 6 months prerequisites with no problems. After replacing the CPU I get intermittent lock ups, sometimes with a small portion of the screen flashes. I say intermittent but at least every 15-20 minutes. Different programs, different habits, but still the screen freezes.

  I went in and deleted the driver under graphics cards, pick a 'completely remove the option' - it after restarting the system on its own charged for a Standard VGA Graphics Adapter and since there is then no more accidents. Of course the functionality is not as complete, large icons and such, but it works.

  If it certainly seems to point to a driver conflict I think. But for this machine, is there ever any single Vista Windows 7 driver. My skills are not so, but I'm moving.

  Any guidance?

  Hello

  Yes, your PC has integrated graphics controller: ATI Radeon XPress 200, we don't find drivers compatible Windows 7 ATI.

  The BEST OPTION: Buy a video card, then insert it into slot PCI Express 16 on the motherboard to better display and multimedia performance with Windows 7 to a value using else, it looks just like Windows XP

• Tecra 8200: If I use the moniter decrease brightness battery power

  I have a laptop Toshiba tecra 8200, when I use it on battery moniter decrease brightness, I tried to adjust the power to the control panel settings, but there is no option for brightness (win xp)? anyone has idea how to adjust the brightness on battery?

  Hello

  If I remember right you can set the brightness of the display by saving settings. Please start Toshiba Power saver. Check the part runs on batteries. There must be some NORMAL called marker profile. Click details, and then click standby power mode tab.

  There monitor the brightness option. All the four options set at the maximum level. Now when you use your laptop on battery power the brightness of the monitor will be defined to the maximum level.

  Please test.

• Tecra 8200: How to get the WPA encryption?

  How can I get wpa running on my tecra 8200. I installed Windows XP SP2, but it still doesn't work.

  Where can I download an update of the firmware of WLAN card because it's my last hope...

  Hello

  It depends on the properties of material WLan if you use WPA encryption option.
  You cannot enable this feature by updating the BIOS or the installation of SP2.
  As far as I know, this wireless network card supports only WEP, but not a WPA encryption.

• Equium A60 - question about replacement OEM DVD - RW

  Hi all

  The DVD - RW in my Equium A60-692 went faulty and reads discs input/output of windows is no longer.
  My Question is: can I replace the drive with any portable computer OEM DVD - RW drive, or should it be replaced with the drive from DVD - RW original it came with?

  Thanks for your time...

  See you soon

  You can replace it with any player, only with a compatible. I have no time to search the list for you and you can do it alone. Check it please s manuals for your model of laptop. Usually, at the beginning, you find a part on information in optical disc players. Should there have listed all the compatible optical disk drives.

  Choose the one that suits.

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• question about cleaning the sensor of the A57

  Dear community of Sony,

  I have several questions about the cleaning of the sensor of the A57.

  Recently, I noticed several dark specs appearing on images when shooting at low opening (F20, F22), especially when there are high for them (like the sky in a landscape photo) contrast. To my knowledge, I've categorized as possible of dust on the sensor. I have read the section of the manual about cleaning the sensor and followed the procedure. However, the problem remained. I have previous experience with cleaning of the more resistant the probe of a Sony NEX dust particles, so I applied it to the A57. I used the specialized sensor cleaning tools combining two parts kit - wet and dry. Noted little dust on translucent mirror as well, so I cleaned up afterwards. Later, I considered this mirror could have some specialized coatings.

  So my first question is: should I have done some permanent damage the mirror or the sensors? Currently, the camera works OK, although some features of dust still remain. It seems that I had pushed some of them to the edges of the sensor.

  I'm not so happy with the tool that I used. I'm thinking about this one for a more thorough cleaning:

  http://www.digitaltoyshop.co.UK/Eyelead_sensor_cleaning_kit_SCK-1_Sony_Alpha_A57_t2836_6789

  It is marketed as a tool for A57. Should I use it?

  Thank you in advance?

  Best regards Angel Marinov

  PS: I'm really happy with my Sony A57 and the NEX. They made me a fan of Sony. So, I want to use this topic to also say thank you to the developers of Sony.

  Hello Angel!

  Read the following steps carefully and let us know if you have any other questions.