Tecra 8200 will not boot - Frezzes on WIN XP startup screen

Similar Questions

• VAIO will not boot xp. Crashes with blue screen error.

  VAIO will not boot xp.

  Sony Vaio PCG - 691L
  XP, installed at the factory has SP3 update.

  .5gig ram

  I worked on the machine to get to start XP. Sometimes it will boot in Safe Mode, but most of the time (and when it does not start in 'normal' mode), it crashes with a blue screen. The blue screen flashes fast to read, and then the machine tries to restart.
  Once I do start safe mode and got WIndows update but can't update due to the update that needs to be in normal mode.
  I was able to install Malwarebytes and a full scan. Also installed Spybot S & D and performed a full scan.

  When it does not start in normal mode it is slow, very slow. I tried rkill and it causes the machine down.

  It starts in normal mode today, but it crashed before I can get open IE and go to the windows update.

  Help...

  Thank you

  Rick

  Tired of playing with this. Re-install xp.

  Thank you...

• Elite 8200 will not boot XP CD

  One branch just a few computers HP Elite 8200 us with i3 processors.  Beautiful machines, but for the life of me I can't have our XP CD to boot from it.  I changed the boot order to boot from CD first and tried to manually start CD with no luck.

  Is there something special that I'm missing?  I can boot to PXE however.

  I understand.

  We are the same here. must use XP for commercial purposes.

  He me bugs without end, why is this issue of CD/DVD.

  There is something defintely goofy and I don't know what it is.

  My Blu - Ray DVD is the latest firmware. I even deleted and installed a former plain DVD - RW. No help.

  I have the latest version of the BIOS installed also. I turned off in the BIOS boot manager and that did not help.

  I hope that someone reported it and there may be a revision of BIOS on the way.  We are not the only 2 people out there with this problem.

  Paul

• Computer now put in hibernation, Vista will not boot. Computer stuck on black screen after startup. Help?

  I put my computer on 'Hibernate' when I went to bed. When I woke up, I started the computer learned to manufacturer (HP) computer screen introduction as usual, but windows doesn't not load afterwards, as he usually does: I just get a black screen. Lights supply and all the rest are on. Just nothing happens. Any ideas?

  Can I use the firmware from HP (I guess that's what it is) to confirm that my memory and hard drive are very good. I tried Googling the problem, and some signs indicate a problem with the powercfg parameter. I can't get in cmd.exe to reset because I can't get into windows (although through HP firmware, I can enter in "Administrator: X:\windows\system32\cmd.exe - cmd", which seems the same, but the orders that I see offered on websites do not seem to work - help?). Ditto with Safe Mode. I don't have Vista installation disc.

  Any help is very appreciated.

  Hello

  You need to contact HP and install recovery disks command to perform a repair.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

• Network card not working plus-nouveau that bought now PC will not boot!

  Hello

  Mounted LAN realtek network card gave up the ghost so I bought this pci-e card on ebay.

  I installed it in each of the 3 slots of alternative but the PC will not boot with it in.

  This card is not compatible, or do I have to buy something else?

  Desktop HP Pavilion HPE h8-1070uk

  12 gig Ram

  Yes, exactly.

  Here is a link to many others...

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene & DEPA = 0 & Order = BESTMATCH & N = 100006519 & isNodeId = 1 & Description = USB + RJ - 45 + Network + adapt & x = 0 & y = 0

  I would like to know well why these PCIe NIC cards cause the PC does not start.

  People install PCIe firewire cards, cards network wireless, sound cards and all work fine, but .they wired NETWORK card doesn't seem to work.  Not every PC is but several.

  A lot of confusion.

• Satellite L300-1AS - error PXE - boot error - will not boot from USB

  Startup error - error PXE-L300 1AS - will not boot from USB

  I recently bought a new HD to replace the original that my laptop takes an hour to load.

  I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

  I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

  Any help or advice will be appreciated.

  Thanks in advance.
  Abul

  New HARD drive has nothing to do with it. Problem must be your USB key.
  In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

  I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• PC will not boot or start the recovery console

  Windows XP 2004

  AMD Athlon XP 3000 +.

  AVG 8.0

  My friend tried to jailbreak his ipod. Now his PC will not boot the OS. It will go to the screen with the options to choose each time you start upward into the safe, normally last good known etc.. Choose one of these options results when control of the PC for the IDE drives and soon after an accident to return to the screen that says "a problem has been detected and Windows has shut down to prevent damage to your computer." I try to start the recovery console, but then I get a blue screen that gives the same spiel, then this Stop error message:

  STOP: 0X0000007B (0XF79BA524, 0XC0000034, 0X00000000, 0X00000000).

  In addition, I changed the boot order in BIOS and tried to use the recovery through an ISO boot console. He ends up crashing this first screen appeared. Even if the BONE is fatal, these guys really want to the GET data out of their hard drive.

  Thank you.

  http://support.Microsoft.com/kb/316401

  http://support.Microsoft.com/kb/324103

  Or, if you just want to back up your data and do a clean install:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Windows Vista update (April 1, 2011) now the computer will not boot.

  1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

  Hi Ema1976,

  Do you have an error message when you try to start?

  Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

   

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Vista will not boot

  Since auto-updates 2nd week of February 2010, my PC will not boot.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And read this update problems:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Creative cloud icon will not appear in the top of my screen

  Nice day

  Even though I am connected to Adobe, the creative cloud icon will not appear in the top of my screen. I do turn my software on a Mac with the latest updates have been installed. You are able to help please?

  Hi Alan,

  Please, try the following steps:

  n ° 1)

  Click on Finder and then in the Ribbon of apple. Click on Go > utilities. Both Manager dustbin of adobe and adobe creative cloud records applications.

  Step 2)

  Click this link to remove the creative cloud.

  Using creative cloud | Uninstall the creative cloud desktop application

  Step 3)

  Click on finder, again option on the Ribbon of apple to go > go to folder

  In the search bar, type ~ might.

  Then go to the Application Support > Adobe.

  Open the Adobe folder and trash folders named AAMUpdater and OOBE.

  Step 4)

  Click on finder, again option on the Ribbon of apple to go > go to folder

  Type / library in the search bar.

  Then go to the Application Support > Adobe.

  Open the Adobe folder and trash folders named AAMUpdater and OOBE.

  Step 5)

  Click on the link below and download creative cloud

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let me know if it helps.

  Concerning

  Megha Rawat

• Tecra 9100 will not read burn them

  Hello.

  I have a Tecra T9100 and CARPET * DVDROM has now won ' t * burned to CD playback.
  He has no problem reading manufacturing CD / DVD.

  I noticed this after upgrading the BIOS by version 1.6.

  Is there anything else I need to do / configure / install?

  Thank you.

  Hello

  Maybe you need to check the different CDs from different manufacturers and should change the slower burning at that speed.

  If this will not help then a CD/DVD drive problem could be the reason why don't not all disks are readable.

  See you soon

• Tecra M9 - will not power on and flashing LED

  Can someone tell me where I can find a list of what means the various sequences of flashing of LED on a Tecra M9?

  I have one that will not be running at all and the power light flashes a particular model of amber.

  Toshiba Tecra M9
  PTM91E-04R03TEN

  Hello

  I think that such a list of error codes for the LEDs are not available. I've never seen such lists on the Toshiba site, I guess they are no longer available to the authorized service provider.

  But you can try this: remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start the laptop.

  If it doesn t work an ASP needs to ask for help. They can give you professional help and fix it.