Tecra 9100 for TV connection problems

Similar Questions

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• Tecra 9100 - unable to connect to the WLan access point

  Hello

  I have a Tecra T9100 with miniPCI WLan. I reinstalled XP Pro and all the drivers (downloaded from the Toshiba site) and I've always had a problem with Wifi:

  I can see all access point (in the windows control panel), but when I click on connect, I received a message that the access point is no more...
  He didn't ask me for the security settings?

  does anyone have an idea?

  Much thanks

  Leclere

  Hello

  To my knowledge the Tecra 9100 was equipped with the wireless LAN standard: 802. 11B mini card PCI ORiNOCO.

  You need to check if the WiFi signal is strong enough for a transmission correctly
  I think that the signal of WLan access points is not strong enough because of the distance.

• Tecra 9100 - no wireless connection

  Can anyone help please?

  The wireless in the toolbar icon has a red x and will not let me connect even though I see my router.
  Can someone tell me how to solve this problem? I have Tecra 9100 with Windows XP SP3.
  Thank you

  Hello

  The icon in the toolbar with a red cross?

  Well buddy, have you checked if the WLan card is properly recognized in Device Manager?
  Usually a first step to clarify if the wireless card is ok or if something breaks down.
  In the device-> network card Manager, you should see the wireless network card.
  If there is a yellow exclamation point, then try to update the WLan driver.

  If the driver has been installed correctly and there is no yellow exclamation mark then the next step would be checking the settings of network connections.

  Check if the wireless network connection is enabled (Start button-> settings-> network connection)

  Check it out!

• Re: Tecra M11 - Outlook anywhere connection problem

  Hello
  Has anyone tried to connect to a server with Outlook Anywhere on the installation of the factory Windows 7 and Office 2010? The authentication window keeps popping up asking for a username and password. (Domain\username)

  I tried to get this working (with Microsoft technology that also supports), but were unable to. I installed a version of Win 7 Enterprise with Office 2010 and 2007 and got the same result. I tried with a Tecra M10 with a Win7 factory restore and a copy of the company of Win7 from my company and it worked perfectly.

  This leads me to believe that this laptop model could be the culprit. I have 2 of M11, and this happens on both. These are not connected to any field. I don't think it's a question of Exchange because Outlook Anywhere works with other models of Toshiba Tecras under Win7 and also several stand-alone Win7 PC running Office 2010 and 2007.

  Any ideas or suggestions would be greatly appreciated!

  Thank you

  Have you tried to exchange experiences with other people who use the same version of Win7 on the different laptop models?
  It is OK to ask this forum to Toshiba, but in history I put t see a link to Toshiba as a hardware manufacturer.

• HP Officejet 5740: HP Officejet 5740 printer for laptop connection problem: "cannot find a printer".

  I'm trying to set up my new printer Officejet 5740 and I got to the stage where I need to connect the printer to a laptop computer or mobile device. I went to 123.hp.com and follow-up stages. My printer is correctly connected to the internet, but when I tried to connect it with my laptop via wifi, I got a screen that says "cannot find a printer". Before that, he asked me to put the IP address that appears in the settings of the printer wireless.

  I have a dual band wireless router, and it seems that my printer can connect only to the 2.4 GHz frequency range. My laptop can connect to the scales of 2.4 GHz or 5 GHz. I made sure that the laptop was connected to 2.4 GHz when I did this step. I even Redid the same process on my sister's laptop (she has 10 Windows), but I came across the same problem. In addition, the screen with the error message says what must I make sure that the firewall has not been in the way of the connection. I tried to disable the Windows Firewall, but I still have the same result.

  I am at a loss for what to do here. Any help would be greatly appreciated. I'm positive, I put the correct IP address, and I even tried to use the host name. Also, I know that my laptop and the printer are connected to the same wireless network. Everything I did for this step in the installation process has been with wifi (not ethernet, USB, etc.).

  Good news! I thought about it. I have all my wireless settings to reset to the default factory settings and that fixed the problem. Something about the State of the router must have been extinguished when I put in place the first time. Thank you for helping me!

• Tecra 9100: Yamaha audio driver problem

  H

  I've just formatted my hard drive and installed Windows XP Pro.

  I ve installed all the latest drivers but I m in trouble with one. audio driver for the yamaha ac device.
  I get the yellow mark next to him.
  So I tried to uninstall, but when I reinstall I cannot start code 10.
  It s the latest driver so I put t know what s causing the problem.

  Can anyone shed any light on the subject, thanks rob

  Hello

  The outcome is known for me.
  The audio driver is simply not compatible with Win XP SP2

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider cannot get operatingsystem version correctly. This problem also happens to Windows XP SP2.

  Yamaha already provides the fixed driver. The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  Welcome them

• Anyone who uses the VMWare adapter? Do you have suggestions for a connection problem?

  I have a connection to a vCenter who works for years. (touch wood).  I am trying to add an another vCenter to tide.  I use the exact same username and password, but I get an error on the valid username and password.

  I tried on 3 different environments of tide.  I can connect to the application of vSphere with the exact same username and password that I updated the current and he succeeds, but the tide connection still does not work.

  Any suggestions are welcome.

  Thank you!

  Michelle Morris

  I suspect that you are facing a known issue in VMware runtime configuration of the user.

  CSCuu49010 - user VMware 5.5 must be created as domain\username.

  Symptom:
  VMware connection is not getting up when the runtime user has domain association
  
  Conditions:
  1. Create RTU for VMware
  2. Specify  and 
  3. Enter the password for VMWare adapater
  4. Now, go ahead and create a new connection for VMware
  5. Connection will not be coming up
  6. Now, remove the domain from RTU and instead specify the username in  format
  7. Connection is now up and running
  
  Workaround:
  In the runtime user configuration associated with the VMware adapter, remove domain name from the Domain drop down and instead specify username in  format.

  You use the areas in your user Runtime used for the new vCenter connection? If so try to remove the domain name from the drop down field and instead specify the user name in format.

• Battery TECRA 9100 - NMI Error MESSAGE problem

  Hello

  I wonder if anyone can help me please.

  So what about the battery power, afer, start the system and after some time, a blue screen appears with

  HARDWARE MALFUNCTION

  CHECK THE SELLER

  NMI: I/O VERIFY ERROR or something like that...

  Anyone help is a star?

  It works perfectly while on the network. Is it a software or a hardware problem. recently istalled new copy of xp and all the drivers.

  Thank you

  Hello

  In my opinion, this is caused by a malfunction of the equipment.
  I found an interesting article about this Microsoft Knowledge Base.
  Check it on http://support.microsoft.com/default.aspx?scid=kb; EN-US; Q315223.

  Good bye

• Network for laptop connection problem

  I received a message on the line that I would not leave my laptop network.

  Nobody never gave me a letter or an email on this issue.  I wish
  much to the network.  Please tell me how to do it.

  Hi Mary,

  1. from which you received the message?

  2. is the source of this trust worthy message?

  3. what operating system is installed on the computer?

  If you have a message of an unknown person, see these articles for more information.

  Scams by e-mail or web: how to protect yourself: http://www.microsoft.com/security/online-privacy/phishing-scams.aspx

  Note: There will be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Online Privacy: http://www.microsoft.com/security/online-privacy/default.aspx

  Thank you.

• How to use the CD of diagnosis of the engineer for Tecra 9100

  Anyone who has used the engineer Tecra CD diagnostic for the 9100 (or any other model if they are similar)? I was able to acquire the CD and have been able to recover part of the diagnostics to run tests starting at BACK 6.22 and the tests directly to the release of the CD. There is probably a "correct" way to use this CD but I have no documentation.

  Specifically, I'm trying to diagnose his painful card problem - it is not recognized by Windows and I can't install the Yamaha riders. I basically JUST replaced on this laptop and still no sound.

  All in ALL, I mean: two mothers (upper/lower case); map its (three different cards!); CPU - what else is one that can be connected to the sound?

  Anyway, if anyone can give some guidance on the diagnostic use of the engineer Tecra 9100 CD it would be greatly appreciated.

  no_bones

  Where did you get this CD of engineers?
  I m scared but in my opinion these CDs are not intended for common use of the user and, therefore, you will not find many people who has experience with those CD.

  But it would be very interesting to know how to get this CD

• Tecra 9100 wireless network problem

  I'll have a chance by putting my Tecra 9100 with my home wireless network. The network seems to work very well. My other laptop connects to it without any problems and I can connect the Tecra with the ethernet cable. But the wireless connection, it cannot be successfully established by the Tecra.

  She claims to be connected, but he receives no package, and could get no internet connectivity. When I try to 'fix' the connection, it sits there for a while before telling me that the IP address may not be renewed.

  I managed to connect the Tecra to the network of the next door without penalty, which suggests that there is some kind of problem with our network interface. I tried to reproduce the exact settings from my other laptop, so I don't understand what the problem is.

  Any idea would be appreciated with gratitude!

  Hello

  It's really not easy to say what is happening here. The functionality of the laptop is ok and it's very confusing if it works with other local wireless networks.

  I recommend putting your access point to the factory without some specific parameters settings and try to connect it.

  Sorry, but I don? have another idea.

• Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

  Hi all

  I got a Tecra 9100 and like many others I had problems after installing SP2.

  I tried to install the sound card with the driver downloaded from the toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  but I get a windows pop saying that the file yacxg.sys is missing.
  Once the installation is complete and the sound card is not installed.

  Is there anyone who can help me?

  Thank you
  Joazinho

  The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

  I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

  Yamaha already provides the fixed driver.

  yacxg.sys 6.13.10.2152 with software synthesizer

  yacxgc.sys 6.13.10.3152 free software synthesizer

• Problems of its Tecra 9100

  I have reviewed all 54 pages of messages of the Forum TE and Tecra here and found only one that relates directly to the issue I'm having. He titled "Tecra 9100 major sound issues" and has been locked, unaswered with the last post on 21 July with some response on the use of a new pilot.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13809

  I recently bought two used Tecra 9100 (guarantee is expired, unfortunately) and they are both in great shape. I couldn't be happier with them, but alas, the sound came out on one. I checked through all the General solutions, Device Manager, reinstall drivers, purchase new sound card on eBay, test with a sound card in the other system of work...

  I tested the drive with a 16 MB SD card and a 1 GB card, of which none were detected (even though I updated the driver for that also).

  Installing the driver for the card his Yamaha returns a warning message telling me that "the driver has been installed not."

  I cleaned all contacts with alcohol and q-tips several times.

  There is no device not recognized in Device Manager.
  The OS is a new installation.
  The BIOS is updated to the latest version (ver 1.60).

  If there is someone tha can you please help me to diagnose more this problem I would be very grateful.
  Thanks to a bouquet.

  Hello

  According to your link that you have posted, the detachment was answered.
  The noise problem was caused by the installation of SP1.
  However, you have bought a second hand units and changed the cards his etc.
  Sorry, but no one knows what you have done on your laptop.
  I found that this unit has been delivered with a YAMAHA YMF753 sound chip.

  In addition, the SD card slot supports are not all sizes of SD card.
  Additional it doesn t support MMC and SD-card/o

• Tecra 9100: Installation of the printer with docking station connected

  I have a Tecra 9100 with a docking station that run under WIN - XP SP1. Trying to install my printer, an Epson 740 with USB connection, I found that I need to create 2 entries for the same printer, 1 environmental off-STATION and 1 for MOORING environment, known as the XXX (1 copy). Is this normal or have I done something wrong.

  This is different from my old Portege that keeps the 2 hardware profiles, 1 connected uindocked and 1, and there is only 1 entry in the Printers folder.

  Also, if I unplugged the printer from the docking station and later taking again on another USB port,
  He will ask reinstall me the printer again.

  Thanks for any comments from anyone.

  I have Tecra M1 and use it on the same port replicator as you have your 9100. The same happen to me if I want to use the webcam on different USB ports. Use it on the same there is no message but using the second port he asks the driver.

  It seems to be normal. :)