Tecra A2 - BSOD when going on the WLan

Similar Questions

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

• When going to the site once again?

  Hi all
  
  When I went to http://apex.oracle.com, I found it gives me
  http://www.Oracle.com/splash/collabsuite/maintenance/index.html
  
  When going to the site once again?
  
  I hope to be as soon as POSSIBLE
  
  Best regards

  It's the weekend of the new year!
  They chose to do the interview!

  He will be back and available when they are done.
  ... and this web page redirected gave you many alternatives if you really have a problem.

  ---
  Furthermore, I don't bother to check until I had a moment of inactivity, about 14 hours after your post. The original URL works fine which suggests that the maintenance is finished...

• Tecra S10: BSOD when inserting adapter duo memoystick in the card reader

  Hello

  I have a Tecra S10-12 b PTS3BE.
  As soon as I insert a memorystick duo desk with or without a memorystick inside in my card reader, I get a BSOD.
  Similar to the user in this topic: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=165760
  Unfortunately the user did not post a link for the driver that solves the problem.
  I've updated to the latest driver for the controller card on the Toshiba site reader: Ricoh 3.54.04 however no change.
  Can someone suggest another pilot to try? I tried searching the site Web of Ricoh download but have not found anything useful.
  Any help appreciated as I now have to use the USB cable to transfer my photos :(
  FYI, SD card works fine.

  Hello

  I have no idea of what OS you use but the card reader controller
  Driver for Win XP downloaded on 15-10-09. It seems that it s among the newer versions. This time it s a 3.54.04.

  I think that you will not find a more recent version

  PS: Check if you BIOS is up to date. If this is not the case, the update.
  Moreover, as far as I know that not all card sizes are supported maybe you should try another card with the smallest size.

• Tecra R850 starts when you open the lid

  Hello

  I recently bought a 2nd hand Toshiba Tecra R850.

  Is it normal for the laptop start loading Windows, open the lid?

  I always perform a clean shutdown when I won't be using the laptop - and I always waited to push the button to start.

  So is it normal for the laptop to start when I open the lid? Is there a substitution?

  Thank you
  Brian

  I can answer myself. I went to the BIOS and there is an option for the laptop to start automatically on opening the lid. I put this to disabled.

• Tecra M3 - BSOD if I install the graphics driver

  I bought a Tecra M3 about 4 years ago. He has recently started to give the BSOD.

  I started in safe mode, and it is fine. I uninstalled the graphics driver and rebooted and it works - just without the graphics driver. As soon as I reinstall the graphics driver it BSOD.

  I'm sure that the GPU/VRAM has a problem of 99.9%. Sometimes as the priming of the laptop there is a random corruption on the screen (before xp load).

  Of course, the GPU can be replaced without replacing the motherboard together. Replacement motherboard is 800AUD + 200AUD for install it.

  In the google search; I found many people with the same problem. Perfect condition laptop Tecra with dead graphics.

  The Qosmio is a reminder for the defective Nvidia GPU. The M3 has a Nvidia GPU. Why it can't be fixed too?

  Hello!

  BSOD code, you get exactly?
  Maybe the problem is a driver or a software problem.

  You try to install display drivers from Toshiba or Nvidia website?
  Have you tried reinstalling the laptop using the Toshiba Recovery disk?

  Sorry, but for the moment I can say more about it.

  Good bye

• Tecra A8 PTA83E, when you open the splash screen

  Hello, I'm me Tecra A8 and when the screen is closed and I open it (computer is not turned off) I get a black screen and he finds "starting windows" and low on the screen, he finds "press F8 to start advanced and looking bad."

  What's wrong?

  I recently clean the computer with the cd and I recently got a service and they change fan and dvd player. I wrote about this problem too, but now it's back.

  Anyone who has this too?

  /Anki

  Hello Anki

  To be honest, it is not easy to understand what is the problem there. You can try to update BIOS in the hope that the problem will be solved.

  I recommend to check the settings of standby power and test it by changing the settings for when I close the lid option. Test also with profiles of different powers.

  Sorry Anki, but it is really not easy to say what the problem is here.

• Tecra S1 stops when you use the Port Replicator III

  Hello

  I ve you have a problem with a Tecra S1 Notebook and Port Replicator III. When I anchor the portable station, it turns off immediately. It doesn´t so serious I m in Windows or not. The same notebook works in a Port Replicator II without any problem. My first thought was, the Replicator III may be damaged, but I tried with an another Tecra S1 and it worked! Can someone help me with this?

  Thx a lot!

  Mathis

  Hello

  AFAIK that should not be any problem as Tecra can be used with the two PRs. The only thing I can recommend is to reinstall the Toshiba Mobile Extensions.

  Good bye

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Tecra 9100 - unable to connect to the WLan access point

  Hello

  I have a Tecra T9100 with miniPCI WLan. I reinstalled XP Pro and all the drivers (downloaded from the Toshiba site) and I've always had a problem with Wifi:

  I can see all access point (in the windows control panel), but when I click on connect, I received a message that the access point is no more...
  He didn't ask me for the security settings?

  does anyone have an idea?

  Much thanks

  Leclere

  Hello

  To my knowledge the Tecra 9100 was equipped with the wireless LAN standard: 802. 11B mini card PCI ORiNOCO.

  You need to check if the WiFi signal is strong enough for a transmission correctly
  I think that the signal of WLan access points is not strong enough because of the distance.

• When going to the next iTunes update?

  Screw the "how to write a good question", I'll be explicit enough here.

  I have an iPhone with the latest firmware 6. I have an iPod nano 7th generation with the last update of the firmware. I also have iTunes version 12.3.3.17.

  I've been using apple and iTunes for my music and it works well. The biggest advantage of the apple ecosystem is its General ease of use (at the expense of the power user who wishes to have more granularity and control more changes, but I digress).

  Long story short, before I updated to iTunes 12.3.3.17, I could sync my iPhone 6 and my iPod nano 7th generation very well. After update iTunes 12.3.3.17, it will recognize that I'm trying to connect my iPod nano 7th generation, but you will encounter an error. iTunes 12.3.3.17 does not yet take into account that I connect any type of device when I try to connect my iPhone 6.

  I tried the following:

  (1) I checked the cable. I tried 2 usb cables of lightning. The two cables are fine. Connect to iTunes still does not work

  (2) I tried all ports on my laptop. My USB ports are fine. Still doesn't connect to iTunes.

  (3) I tried to uninstall and reinstall iTunes. Still doesn't connect to iTunes.

  (4) I tried to roll back to an older version. I encounter an error of the library where the old version of iTunes cannot read the new version of iTunes library.

  No, restoring an older version of iTunes and follow the measures to ensure that the library is read isn't a real solution, it's a work around until the next update.

  I'm not willing to mess around with the files, potentially lose my library and the money I've invested there.

  I like iTunes because it is the online library of wide, I know where I can buy the music. I'm not in the trend of premium internet radio, where people subscribe to get full access to a huge library of songs. I am a young old school (going on 24 years) who prefers physically possess (or in the case of apple, license) copies of music that I like. I get many premium internet providers allowing you to download songs for offline listening, but it's only for as long you pay their subscription.

  Apple is currently working for me because I have a "safe" online to buy and download songs, as well as synchronize with my devices in a simple and direct way. However, I am fiercely musical, and I know and understand the other side of the economy of music where people are downloading freeware music software to manage their libraries and/or download music from sites such as BandCamp and SoundCloud (in some cases, legally and for free).

  I ask because I want to know when I can expect the next real solution to this problem. This isn't some minor, the issue of 'oh, we have abandoned in favor of this product'. Right now, I am unable to manage my Apple ecosystem because of this blunder. And I searched through the forums and the "solutions" that have been given have been workarounds for this problem.

  When can I expect the next version of iTunes to spread and apple knows about this question and to devote resources to solve? This isn't a race of the issue of the factory, is a huge blunder, and I read support wires that date back to when the first version was released in March. We will get a solution soon? or will we have to wait for the next stable release?

  In response to the question in your subject line, only Apple knows when they will release the next version of iTunes. Until they announce, nobody here can answer your question.

  Good luck.

• Tecra A2 - BSOD when installing Windows

  Hello

  I have a Tecra A2, I have not used for some time. I decided to start again and he gave me the blue screen of death just after loading Windows XP (before selecting your user profile). He continues to do so after I restarted several times, so I decided to reformat the computer.

  I have reformat the computer and Windows XP begins to resettle. After installing I go through all issues of installation such as name, country, time zone, recording etc.. After that's done, I get the blue screen of death again. I restart the computer and it tries to load Windows XP. Then he told me that "the system is not fully installed. Please run Setup again. "Then he gives me the blue screen of death.

  Rereformating laptop computer does exactly the same thing as the first time. So I tried to boot the computer with the recovery discs, and that did not help. He finished just gives me the blue screen of death.

  Can someone help me?

  Steve

  Hello!

  I agree with Akuma. You should post the BSOD code because there are many of them. If you have the BSOD code, you can search in the Mircorosft Knowledge Base. Often you can find an article on this issue.

  In my view, it could be a HARD drive or RAM problem, but together you can check with special tools. Use Memtest86 for RAM and the aptitude Test drive to the HARD drive. The tools that you can find with Google.

  Good bye

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• BSOD when I start the computer.

  I got twice the BSOD now when I start my computer, the next time I start up my computer after the BSOD I don't understand and my computer starts as usual. And I get a message with the details of problen:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1044

  More information about the problem:

  BCCode: a
  BCP1: 0000000000000000
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF80002CACF74

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\110312-15553-01.dmp

  C:\Users\Kristoffer\AppData\Local\Temp\WER-23275-0.SysData.XML

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• There is a clickable scroll bar which can be used when going through the photos?

  When you scroll through my images to add tags, it does not seem to be built in the scroll bar that I can click up or down to scroll with. Instead, I use my mouse and sometimes it comes out conrol and begins to scroll through a lot more images I want. I use the last LR on a Mac. Is there a way to get a clickable scroll bar?

  Thank you.

  If you just want to scroll very slowly, try to grab the grid itself in the corner where four photos are gathered and the travel that goes up and down.