Tecra A2 does sometimes when moving between programs
Tecra A2 occasionally freezes and does not respond. If I end task and launch it again it works normally. Sometimes I have to restart the computer until it is fixed. It happens often when opening Outlook or Excel to Word trip. Just to uninstall the OS, reformat the hard drive and reinstalled but it stil has frozen two times in 6 hours today
> Tecra A2 occasionally freezes and does not respond. If I end task and launch it again it works normally
It is a normal behavior if an operating system is busy.
If a lot of process and services are run in the context of the operating system, so the system could sometimes hangs.
In you case, I would recommend the whole OS and surveillance programs simple and check which application could cause frost.
But note; Sometimes a problem of overheating could cause these issues also.
Usually, the temperature rises to a higher level if the CPU works with maximum performance. If cooling modules n t work properly then the CPU cannot be cooled and the laptop could start to freeze.
In such cases, it s advisable to clean the fans with a jet of compressed air.
Good luck
Tags: Toshiba
Similar Questions
-
Want to just clear the values in the command prompt when moving between pages
Hello
I wanted to know if its possible.
I want to erase the prompt value when moving a page to another page in the dashboard is
should show the way it was when displaying arriving first to the page. Is this possible?
The problem is that I have a guest of the region as well as a few other guests of column in page 1
Still in page2, I have even invited to the region and another message from page2 column.
I think that since the same tablename.colname when I select the APAC region is mentioned guest in page1
in page 2 also APAC is selected by default
I want to avoid this?
I use obiee 11g
Thank youJin
have you checked the scope of your prompt? Make a prompt page and it should solve your problem.
-
vm.relocateVM_Task does not work when moving between clusters
Hi all
I have a Scriptable who suppose to migrate virtual machines (datastore and host) to another cluster. When I test it within the cluster, everything works perfectly. But when I'm trying to move a VM between clusters, I get:
"specified incorrect setting '
I can manually move the virtual machine via vSphere Web Client without problem.
This is the code in the script task:
//Get VM's number of VMDKs diskIDArray = new Array(); var devices = vm.config.hardware.device; for (var j in devices) { if (devices[j] instanceof VcVirtualDisk) { diskIDArray.push(devices[j].key); System.log("VM Disk ID:" + devices[j].key); } } //Migrate var spec = new VcVirtualMachineRelocateSpec(); spec.datastore = destDatastore; spec.host = destHost; spec.disk = new Array(); for (var i=0;i< diskIDArray.length;i++) { var disk = new VcVirtualMachineRelocateSpecDiskLocator(); disk.diskId = diskIDArray[i]; disk.datastore = destDatastore; spec.disk[i] = disk; } //vcTask = System.getModule("dk.atea.extra").XvMotion(vm,destHost,destDatastore); vcTask = vm.relocateVM_Task(spec, VcVirtualMachineMovePriority.defaultPriority); // VirtualMachine
Any ideas?
Dan.
Hi Dan,.
You must set the target resourcepool (spec.pool).
Maachah
-
BlackBerry Smartphones calendar time change when moving between time zones
I travel between mountain and Central time zones. When I get the appointment I specify the time zone that the appointment should occur. When I go back to the other time zone and change the time of BB to the correct area, all appointments move ahead or back one hour. Is there some sort to have well positioned BB time and appointments to stay at the right time without moving forward or backward and time?
It's normal. When you change the time zone on the device calendar entries will change, too. If you set a date on the calendar for the hour 17:00 and you change time zones in Central time that entry calendar will increase to 18:00 18:00 central is 17:00 mountain. The calendar shows always real-time.
-
Lightroom 6 crashes when moving between images using develop
I use Lightroom 6.0 on a MacBook Pro 2010. When I'm in the mode develop and move a photo to another, the program crashes.
My system info follows, in which case it is useful. Please only respond with solutions, not "I have this problem, too." Thank you!
Lightroom version: 6.0 [1014445]
License: Perpetual
Operating system: Mac OS 10
Version: 10.10 [5]
Application architecture: x 64
Number of logical CPUs: 4
Processor speed: 2.6 GHz
Built-in memory: 8 192,0 MB
Real memory for Lightroom: 8 192,0 MB
Real memory used by Lightroom: 714,6 MB (8.7%)
Virtual memory used by Lightroom: 2 619.4 MB
Memory cache size: 302,3 MB
Maximum thread count used by Camera Raw: 2
Camera Raw SIMD optimization: SSE2
Exhibition: 1) 1680 x 1050
Hi Paulcohn,
Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.
Also, update the to 6.5.1 program: maintaining up-to-date for Lightroom
Concerning
Claes
-
First Pro CC 2014.2 frequently crashes when switching between programs
I started to program frequent crashes in first Pro CC 2014.2 Mac OS 10.10.3 on my Mac Pro 2013. This problem occurs when I switch to another program, say word or Adobe Audion back to Premiere Pro. I have the dialog box "we're sorry" and the application breaks down. About 50% of the time when this happens - when I reopen it the application that it hangs again - and then on the 2nd re - open it is successful. It's really annoying my workflow to worry about a crash whenever I have spend in AE or hearing. I uninstalled all the plugins, uninstalled and re-installed PP, erased the media cache and reset the preferences. Happening every day on this machine. FYI, I have an iMac 2013 running the same operating system that opened the same project files without this issue - it seems that it is specific to this machine for some reason any...
Hello
I suggest the following:
- Hing-while-working-Mac-OS-x-10-9-and-later/ http://blogs.adobe.com/kevinmonahan/2014/09/10/Premiere-Pro-CC-freezing-on-Startup-or-Cras
- Run a repair of permission to drive on your startup disk, and
- Reset the folder permissions and ACL error | Apple support communities
Thank you
Regalo
-
Request OA region shows the previous search results when moving between pages
Hi all
I have a custom Page of OA, which is a query based on a LOV region to search for names of devices. The problem I am facing is once the device name is searched and I'm going to another page through quick links and back on the same page Search Device, it shows the previous search results. I am does not keep AM for all navigation page.
I already tried things:
4 K I tried refreshing VO using clearcache and reset methods on the VO.
2 get, click on the OK button of the query in ProcessFormRequest region and the Go button I use forwardImmediatelyToCurrentPage. And in the process request method that I question the results manually when will click on a button. Otherwise I do it manually where clause condition 1 = 2 and ensure that the VO returns no rows.
But still, I am not able to get rid of the issue.
The used code is pasted below for your reference. It is urgent. Can you please provide pointers.
' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processRequest (pageContext, webBean);
Try
{
Am = (VpaAdminAMImpl) pageContext.getApplicationModule (webBean) VpaAdminAMImpl;
TkvpaDeviceSearchVOImpl deviceAll = am.getTkvpaDeviceSearchVO1 ();
deviceAll.clearCache ();
deviceAll.reset ();
deviceAll.setWhereClause ("1 = 2");
deviceAll.setWhereClauseParams (null);
String query = deviceAll.getQuery ();
System.out.println ("request getSearchResult: =" + query);
deviceAll.executeQuery ();
OAQueryBean queryBean = (OAQueryBean) webBean.findChildRecursive ("region1");
String goAction = queryBean.getGoButtonName ();
If (PageContext.GetParameter (goAction)! = null)
{
getSearchResult (pageContext, am, webBean);
}
}
catch (Exception ex)
{
throwException ("SearchDeviceCO.processRequest", ex);
}
}
' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processFormRequest (pageContext, webBean);
Action string = pageContext.getParameter (EVENT_PARAM);
OAQueryBean queryBean = (OAQueryBean) webBean.findChildRecursive ("region1");
String Go = queryBean.getGoButtonName ();
System.out.println (PageContext.GetParameter (Go));
If (PageContext.GetParameter (GB)! = null)
{
pageContext.forwardImmediatelyToCurrentPage (null, false, "N");
}
}
Public Sub (VpaAdminAMImpl am, pageContext, OAWebBean webBean OAPageContext) getSearchResult
{
Try
{
String device = pageContext.getParameter ("deviceSearch");
StringBuffer sb = new StringBuffer();
If (device! = null & & device! = "")
{
SB. Append ("nom_peripherique =" "");
SB. Append (Device);
SB. Append("'");
}
String sql = sb.toString ();
TkvpaDeviceSearchVOImpl deviceAll = am.getTkvpaDeviceSearchVO1 ();
deviceAll.setWhereClause (sql);
deviceAll.setWhereClauseParams (null);
String query = deviceAll.getQuery ();
System.out.println ("request getSearchResult: =" + query);
deviceAll.executeQuery ();
} catch (System.Exception e)
{
e.printStackTrace ();
}
}
Thanks in advance,
Abhishek MishraHi Abhishek,
Please try the code below in your controller ProcessRequest
This will clear the previous search from the cache.
Example of
OAQueryBean queryBean = (OAQueryBean) webBean.findChildRecursive ("QueryRegionName");
queryBean.clearSearchPersistenceCache (pageContext);Hope that helps :-)
Kind regards
Chaouki -
"Not responding" when moving between modules
I'm under 10 Windows on a PC with the latest update installed (6.3). If I move to develop the library to the develop module, I get the message LR "not responding". Hands of LR. This problem started with version 6.2.
How to reinstall if necessary when I installed using a download?
Hello
I'm under 10 Windows on a PC with the latest update installed (6.3). If I move to develop the library to the develop module, I get the message LR "not responding". Hands of LR. This problem started with version 6.2.
Please uncheck "Use Graphics Processor" under Edit > preferences > Performance
Let us know if this helps
~ Assani
-
I have a laptop that I put in place two hardware profiles for the specifications below. One is anchored (work) and the other is in stand-alone mode (home). I put my deskstop settings monitor extended with the laptop as main display when it is docked and the external monitor to the main when undocked view, switch off and moving between the dock and undocked States, my monitor preferences resume their single monitor with the main display as the LCD screen of the laptop.
I would like to know if there is a way, either with a batch file, script VBS,... to set these parameters to display by running of the said script. The video card is an Intel HD Graphics 3000 graphics card. Sorry, I don't have the info exact chipset. I have set up 2 separate profiles in the application for the video card utility but only makes the manual setting of my display preferences, it does not automatically value them when moving between States anchored and released.
Any information is greatly appreciated.
OS: Windows XP SP3
Laptop: Lenovo T20s
Graphics card: Intel HD Graphics 3000
Monitor the work: Viewsonic VG1932wm-LED
Home monitor: Acer LCD monitor
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum Technet and MSDN. You can follow the link to your question:
For the VBS script: Forum of Visual Studio. (MSDN)
For batch scripts: Windows 7 User Interface. (TechNet Windows 7 IT Pro Forums)
Hope the information is useful.
-
Display screen when changing the programs problem
I have a C670 - 17L and just recently I started having problems when switching between programs on the taskbar. Already when I used to click to change the programs screen of the selected program would open quickly. Now, it's much slower - it shows behavior similar to discoloration in transition on a Powerpoint presentation. Instead of a good quick change, it takes a few seconds.
The only changes I did install Mozilla Thunderbird and Norton Internet Security, but I don't see why that should make a difference.
Any help would be greatly appreciated - it's starting to drive me crazy!
>.. .and Norton Internet Security...
Remove Norton from the system and check if there is a difference. As far as I know that Norton is well known for slow performance s notebook due to his activity in the background.If you want to have the right antivirus software install Avira antivir.
-
Hey there,
When to (for example), Illustrator and AE program seems to have a greater likelihood of crashing. I was not able to determine exactly why this is happening.
I often copy - paste forms of AI in AE, but it is not always plant AE. It could be the speed with which I switch between programs, but I'm still not sure about this.
In addition, it breaks the audio driver somehow and Spotify (running in the background) stops playing. Restart Spotify corrects this problem.
AE crashes and is often frustrating. I sent Crash Reports, but so far no help.
I just activated registration--which has also caused some AE to fail. This time when (re) launch the program. It wouldn't start, but also did not highlight as suspended in the Force Quit of OSX dialog box. She would not answer Force closes and hung my system when I tried to reboot. You had to manually restart my Mac Pro.
Well, variable time!
Mac Pro (end 2013) 3 GHz 8-Core
64 GB of ram
OS X Yosemite (10.10.2)
After Effects CC 2014 with the latest updates
Illustrator CC (not 2014) same with the latest updates
He does not behave like that on my iMac at home.
Any advice would be (very) welcome at this time.
Huh! I should have checked the settings correctly. It is a facility relatively new compared with at home.
Solution: Check that there is enough RAM available for other programs.
In addition, light AICB could do the trick, too. But I suspect that the latter has a much greater effect.
-
Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.
Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.
-
Tecra 8200 freezing when moved
problem that appeared and now it turns on but the power light comes on it just won't start - sometimes it does and when it's the least of the keys it will freeze im really stuck and don't know wot 2 do
Hi Jack,
It sounds as if there is a hardware fault with the internal components of your laptop. This can be something simple like a loose connection, or something more complicated.
I suggest remove and replace then any device such as CD - RW, HDD, FDD, battery, etc. of RAM chips. If the problem continues then it will be probably needed to take the laptop to an authorized Service partner.
HTH
-
Yoga 2 Pro - cursor flashes when moving on some programs
I have a Yoga 2 Pro with Windows 10. Some programs (for example Thunderbird, LibreOffice), the cursor flashes when moving on the program window. I made sure my screen and touchpad drivers are up to date as well as the BIOS of my laptop. What else could be the cause? It's a bit irritating.
Mod edit: System model added to the front of the subject line to improve visibility / clarity.
Went before and refreshed; things seem to work fine now. I guess the moral is 'don't do an upgrade directly from Windows 8.1 to 10'.
-
Original title: change the direction of the mouse moves from the main screen to the external monitor
My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change
Hi Jayson Bourne,
Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:
· Did you do changes on the computer before the show?
· You get the error message?
· What is the brand and model of the mouse?
I'll help you with this problem. I suggest you follow these methods.
Method 1: Follow the steps in the article.
Change the settings of the mouse
Method 2: Update the latest drivers/software for the mouse.
Updated a hardware driver that is not working properly
I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.
Maybe you are looking for
-
Alarm and timer does not iOS 6 s 10
Help! After having downloaded the iOS 10, my alarms and timer does not work. During the years that I have had 4 different alarms set - 2 in the morning and 2 the afternoon. This morning the alarm at the top of my phone icon was there, so I assumed th
-
Can I add an SSD for my P775 program Satellite?
CAN I ADD AN SSD TO MY SATELLITE P775 PROGRAM-112 WITH THE HELP OF A KIT OF TOSHIBA?
-
Conn timeout PIX recommendations
Hello What are the possible performance problems and security issues with the increase of the timeout values (especially of conn)? Are there recommendations on the max values? I can't find anything other than the syntax on the web site.
-
Hello I want to buy an app in the store windows using my credit card. I found the section where I can add payment options. It's all good and Nice, the only problem is that I can't change the country for when I'm in my credit card information. It i
-
Nach Ablauf der Testversion kann kein Abo werden, cloud would already have communications
Meine Testversion der Creative Cloud Student Edition ist abgelaufen. Die cancellation ist schon von Anfang an und wird're liegt kein Abo as meine Personendaten vor, obwohl dies in meinem Konto ist registered?Wie kann man beheben dies.