Tecra M2 - cannot install the last driver wireless

Similar Questions

• Satellite A300D-17Z - cannot install the display driver for Vista

  Hello

  There is a big problem with my A300D-17Z.

  The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

  Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

  Hello!

  Have you tried to install the driver to display on the Toshiba site? You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

  You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

  Good bye

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• Satellite A50-109: cannot install the latest driver for card ghraphic

  Hello

  When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
  THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
  Please help me
  my graphics card: Intel 82852/82855 GM/graphics controller GME

  Please help me

  Hi Milad,
  Did you get the new driver from the web site of Toshiba or others.

  The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

  HTH

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Satellite L555-S7008 - cannot install the display driver Windows 7

  Hi guys

  I'm confused now
  I have a Satellite L555-S7008, I installed a Windows 7 ultimate edition, but unfortunately the display driver did not work. Now I have pain in my eys because of the resolution. What should I do to make it work?

  Hardware found "Mobile Intel (r) 4 Series Express Chipset Family", but it does not support this type of material

  (2) what driver should I I installed to the PCI network communication controller?

  Hi ROCO_1,

  I had a similar problem with the display driver I t could not install it. I put t know why it happened, but the solution is that you need to install the display driver through the Device Manager and not from the configuration file

  So go into Device Manager and right-click on the graphics card and select put to update driver. Do not choose the Advanced installation where you can choose the driver directory yourself. Select the files that you have unpacked the file downloaded and that s all.

  About the communication network PCI controller, it could be both: WLAN or LAN card. So, make sure that the two drivers are installed.

• Portege M400: Installtion Windows - cannot install the RAID driver

  Hello world
  I installed my original form of the system DVD Toshiba (60 GB partition).
  So, I bought the second system with my notebook (Windows XP Pro OEM PL) and I want to install it on my second partition. When installing WinXP installer asked me about RAID driver on drive A: (I USB floppy drive, so it's no problem)... next step - partitioning - no problem. But when Windows starts to copy files (after select and format partition), ask again on RAID driver disk A: - and that is the problem, because my floppy drive is not present (maybe disable it windows after formatting the partition, I don't know)...
  There is also no results:
  -J' tried to install Windows on USB HDD, but there are blue screen after the first reboot,.
  -J' have tried to compile the RAID driver in driver.cab, this does not (or I did wrong).
  Someone has an idea how to install my second system? It is OEM, and I don't want to lose him.
  .. Sorry for my poor English :)...

  Hello

  After installing the driver RAID you should not make any partition or format the HARD drive.
  If you do this, the RAID driver is deleted and you will get an error.

  So do all the changes on the HARD disk before you install the RAID driver.

• Satellite A300D-11 t (PSAK0E) cannot install the video driver

  Hello!

  I can't find a video driver for my laptop (Win XP). Unfortunately I lost a CD I got with it. The drivers I found on the official website of Toshiba didn't work - display-20090925081024 or display-20071214163138.
  A user of the forum USA Toshiba (cee_64) advised me to install a driver of motherboard chipset, but I could not install a driver because the appropriate web page (http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK) says that, for the following parameters: short model No. = PSAK0E, Type of driver = "Chip Set Utility", country = all language = all , he could not provide any driver: "Sorry we could not find the drivers matching your search criteria", so I assumed that simply (and apparently unjustly) I don't have the drivers for my motherboard. A few other drivers (its LAN, WLAN,) are provided in the section of the conductors of the web page and I have successfully installed.

  Can someone help me? Please, I beg you! :-) For now, I use 1024 x 768 mode only... :-(

  Best regards, W.P.

  And what happen when you try to install THE display driver?

• Satellite L300-01:00 PSLBGE - cannot install the graphics driver

  Hello everyone.

  I have a big problem with my laptop video driver.
  Yesterday, I started my windows and put Windows Vista on it.
  I got all the drivers from the toshiba site but ran into a problem with the graphics driver.

  When get it Setup starts and them it gives me an error "this computer does not meet the minimum requirements for installing the software. The Setup will exit. I must say that before the start, I also got Vista and it worked.

  So can you please help me because I don't know what to do to...
  I tried all the possibilities

  Thank you very much

  Teodora

  Hello

  You can try to install the graphics driver in Device Manager.
  Go to the Device Manager, choose graphics card, click on update driver, then point to the (ini files) graphics driver files stored on the HARD disk and complete the installation

  Try this usually it should help

• Windows 7 cannot install the video driver for vaio

  I installed windows 7 RC on my computer laptop vaio VGN-TX770P. The standard VGA controller seems to work the laptop screen using the chip intel, but claims he can not find a driver for the connector external vga for monitor. I tried to install the vista drivers from the website of sony in vista compatibility mode, but it seems to ignore it. Any suggestions?

  OK - solved. Machines built around chipset 915GSM need to install the XP driver downloaded from intel in XP compatibility mode. That at least gets video acceleration and double screen works as well as XP.

• See 4 and VM Windows 7 x 64: cannot install the SVGA driver

  See Agent fails to install the SVGA driver automatically. Manual installation ends with the message:

  "The driver is not intended for this platform".

  
  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

  Anton,

  Desktop 64-bit are not supported for view 4.0. Please see http://www.vmware.com/pdf/view40_admin_guide.pdf for the full list of desktop operating systems.

  Mike

  (Apologies for the exact same about three threads)

• Satellite C660-15 cannot install the update of wireless lan

  I receive a notice indicating that my wireless lan driver should be updated. I followed the instructions and know which unit my laptop (Realtek: RTL8188CE) and download the appropriate driver software. It appears as a zip file in my downloads folder. I unzip and then what?

  Read the instructions Dutch (although I prefer English on notice that download and update the driver) it is said to look for a readme file (they are all very old, since 2010, none in 2011). Really they don't say anything about what to do. In Dutch, he also says to click on SETUP. I find one that is marked as an application, so I double click that.

  It runs, and then on the screen it says something like: "the software may or may not have installed correctly". So I click on it to install it again. Same thing.

  I had no idea if it installed correctly or not, so I clicked on the features of network/system/control panel (?) / Realtek... and right-click to see which version of the device driver is there and it has not changed.

  So, what should I do to get this new driver works correctly?

  I tried several times and it doesn't work right. It becomes very frustrating and there seems to be no way to contact Toshiba support, other than through this forum (which is users rather than support from Toshiba, I think).

  Help, please.

  cjbbrussels

  Try to install the driver using the old-school method.

  Enter the card WLAN (Device Manager) properties > driver > Update driver and browse to the RTL_Driver folder. Choose the folder 7 x 64 or 7 x 78, according to the version of the OS you are using.

  I think that it will install the driver.

  By the way: If your WLAN is working properly you should not install this driver.

• Tecra M5 - cannot install Intel graphics driver 945GM

  Hello

  A few days ago, I bought a Tecra M5 opportunity.
  When I received it, the HARD drive has been formatted and I had no CD with drivers from the laptop.
  So after a while, I found most of the drivers I need... only the driver for the Intel 945GM does not work, I tried the Toshiba homepage and the homepage of Intel, the two do not work...

  One of the Toshiba Homepage gives me the error "one or more files are damaged or are missing. The installation program will be interrupted. »

  [I found this Thread here: http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=83858], but I did not really help, but the problem seams to be the same.

  So please help me.
  Thanks to this day, to read my Post and try to understand my English (I'm German<><>

  Hello

  How have you tried to reinstall the Intel driver?
  Have you tried to do this UN Device Manager?

  Go to Device Manager, select the unknown device (appears if the driver is not installed), and then choose Update driver.
  Then choose the option of advanced installation, then Don t research. I will choose the driver. Point to the place where the driver package was stored and uncompressed.

  Usually, this should help to reinstall the driver.

• HP CSI Shell has stopped working - cannot install the printer driver

  I just bought a printer LaserJet MFP M127fw Pro, but the installation of the pilot program still crashes. I tried 3 different modes of driver installation: the installation CD install HP Smart (USB) and download online, but I keep getting the same error.
  
  10-15 seconds after I start the driver installation, a pop-up Windows appears, advising me that:
  "HP CSI Shell has stopped working".
  
  I called HP customer care and they post in the computer section of the Support Forums.
  
  Does anyone have a solution to this problem?
  
  I have a HP Media Center PC with Windows 7 64 bit.
  
  

  Update:
  
  I tried the feature "Add a printer" windows default in Control Panel, and my printer is finally functional - only when used wireless. However, if I connect the USB cable from my printer, it will be recognized as a different printer and always unsuccessfully installed the drivers for it.
  
  If it works wirelessly, it is good enough for me.

• Satellite M60-176: cannot install the graphics driver

  Greetings,
  I'm trying to reinstall the original driver from Toshiba site
  on a satellite M60-176 disabled ATI X 700 256 MB dedicated

  version is:
  Driver VGA (ATI M24C/M26P)
  V8.121.050322a - 021880C
  Driver VGA (ATI M24C/M26P)

  The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

  When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

  I tried to follow the sequence as:
  uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

  I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

  TOSHIBA support put me to BIOS 1.60 level: same problem

  I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

  Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

  I'm really ask for help, because I do not know how...
  Kind regards
  Ludovic

  Hello

  What happens if you install the operating system from the Toshiba Recovery CD?
  This CD also contains the ATI graphics driver.
  How about installation of the graphics driver on the site omegadrivers.net?

  But I must say that it is very strange question. The driver from the Toshiba site should work.