Tecra M2 - standby, hibernation does not work

Similar Questions

• Standby/hibernation does not work on satellite

  Click on start/stop of the computer/standby and nothing happens.

  Hibernation icons and the day before are not active just stop and cancel it.

  Can anyone help.

  Hi Colin,

  Go to the Toshiba power management option and click on the "Advanced" tab make sure that the enable hibernation support option is checked. Alternatively, if you use Microsoft power options, then click the Hibernate tab, and check that put into hibernation is enabled.

  Kind regards

• Satellite A200-14F - standby and hibernation does not work

  Hello
  I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

  I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

  If you have had the similar problem please write what I have to do.

  Concerning

  Hello

  > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
  After Installing Win XP, you must update the BIOS to the XP version.
  You should check the page European driver of Toshiba. There are BIOS for Win XP.

  After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

  Welcome them

• SL500 XP mode standby / Hibernation does not

  I did a clean install of Windows XP and installed the drivers. Mainly the power management driver. But the standby and hibernation does not always work. I don't have even as options in windows.

  I have another installation of XP has been transferred from an old R52 laptop and everything works it.

  Any ideas on what I might be missing?

  I had to install the latest Intel video device driver. Now it's working.

• Tecra 540 CDT: keyboard does not work properly

  Hi people

  Just bought a 540cdt Tecra second hand and the keyboard is a bit strange - A key does not work and some of the keys seem to make things weird-UPDATE prints an exclamation mark and key END operates caps lock etc. I don't know if it's a keyboard of knakckered or whether the same strange keyboard configuration has been made. If it's a flat keyboard will install a replacement to solve the problem?

  Also, is it possible to replace the CD drive with a DVD - ROM drive. From the looks of it all DVD players I have met seem to be model specific.

  See you soon

  Peter

  Hello

  Maybe your operating system has keyboard settings wrong country.
  Check in the control panel settings. But for me, it looks more like a keyboard or a keyboard controller failure.
  Perhaps also loses the keyboard cable.
  I don't know if only a new keyboard will solve the problem. I think the detailed diagnostic test is necessary.
  If you want to upgrade your laptop with DVD drive, please check first if it is taken in charge and compatible. If you install the disc is not compatible, then you will get an IDE error and the BIOS does not recognize the drive.

• Tecra A8 fingerprint sensor does not work correctly

  I bought a laptop Tecra A8 which has as security option touchchip fingerprint coprocessor. He worked only 8 days and then have not read my fingerprint. By device mananger I uninstalled and reinstalled drivers auotomaticlly and was the message to the device mananger "working properly", but it does not work! I tried to fix its software in the control panel (programs), but it dose not work again.
  What is your suggestion?

  Hello

  I Don t know what software you have installed on your system and how is your configuration, but if you've already tried this steps you mentioned while it should the next step be a full recovery from your system with the recovery media that shipped with your machine.

  Don t forget to back up your data on external media. ;)

  By the way: If the recovery does not help, then you should contact a local servicepartner since you have warranty on your machine.

  If you really want to find one in your country then click here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Tecra M4 - Tablet function does not work do not

  Hey guys,.

  Please excuse my bad English, first of all.

  I got a Tecra M4 and after installing the drivers and xp tablet the tablte still does not work.
  I forgot a driver? Which is responsible for the tabletscreen?

  THX,

  Marti

  Hello

  You have installed the drivers who exactly? I checked the Web from Toshiba site and it shows some shelf tools that you install (Pack Tablet, Tablet PC button driver, etc.) and also to install the utility of Rotation. You can download everything here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  The site also shows an installation instructions document. Use this list as an order to install drivers recommend.

• Tecra A4: Display backlight does not work

  Hi all

  Thank you for taking the time to read this. I came across a dilemma. My sister laptop screen broke (baby) and it was far from always being in warranty and we had not assured him. So I bought a new screen for it and it mounted fine. When I turn on the laptop, I can hardly do anything on the screen as if the backlight does not work.

  I see that it is there, it's just very very dark. I thought this would be a problem with the inverter. So I bought a new one of those too, but alas, it still does not. I can do all things beautiful to display on an external monitor via the VGA port.

  Someone at - it ideas?

  Thank you once again

  Danh

  Hello

  I understand you want to save money, but especially help the technician is most recommended as repair by yourself.
  In any case, as mentioned, you should be sure that the cable has been connected in the right way.
  You must connect the LCD/FL cable to connector LCD/FLand connect the cable to connector HV HT. Place the module LCD, the FL inverter board in the correct position.

  Good luck!

• Tecra S1 video output does not work

  Hello
  I tried to connect my TS1 via cinch to a video projector. Unfortunately due to other reasons I can't use VGA.
  However I get no signal at all. I almost tried everything. I installed Windows XP with the Toshiba Recovery CD again, but it does not work either.
  Is that no one knows what to do?
  Best wishes
  Markus924

  Hi Markus924,
  you have an image on the internal lcd screen?
  through thumbtack to a video projector - it will not work...
  you get a pal/ntsc this connector signal... I don't know if your beamer can handle this type of signal...
  Take a vga cable to try * and * install the "fn + f5" Toshiba tool to move the picure to external display.

• Tecra M9 - SDHC cards does not work

  My SD card reader does not work with SDHC cards. Can someone help me?
  My operating system is Vista SP1.

  Have you tested before installing SP1?

• Tecra A2: Energy saving does not work correctly

  I have a Tecra A2 and I was using Xp Pro quite happily. In recent months the energy saver has been not working properly. I have uninstalled and reinstalled the software and drivers and BIOS updates. It does not give me a good estimated more time.
  When a battery it disappears quickly and the word of the will to give the exact time. The system also stops whenever a battery warning critical on 3pc wen even, I adjusted the low battery level settings in the menu. ?

  Ignores the settings completely. Someone encountered this b4. I have (so far) ZoneAlarm, Spysweeper and sometimes Webroot Window Washer running. I used Registry Mechanic to test everything and Spydoctor to check the system.
  I use Outlook and regular IE. I use Limewire, Nero, MsN.
  Help!

  Hello

  Generally, the battery is designed for approximately 500 procedures of load.
  You issue sounds like broken or defective battery.
  It s a normal question who, after a long work time of battery doesn t working properly and it of necessary to replace.
  I also recommend to remove the battery for the work with the AC adapter. In this case your increase in battery working time (life)

• Tecra A9 - fingerprint sensor does not work

  My Tecra A9 is less than 2 weeks old. The first day, the fingerprint sensor worked for a few hours. I registered three fingerprints. Since then when I drag my finger, 99% of the time it does not recognize or gives a message 'too short', although I followed the steps in the tutorial.

  There is a window where you can test the fingerprint sensor trying to drag prints. I asked the other two persons, of different ages and gender, to try it, but very rarely is he not successfully registered printing.
  My call to the support wasn't very helpful because I was threatened with charges of £35 if they find nothing wrong with the hardware. As a normal user, is not what it says on the Tin.

  Has anyone had the same problem and managed to resolve it. If so, how? If not, are there other people in the same situation?

  Hello Assa

  It's very strange. I didn't notice any problem on my Tecra. Please start Fingerprint Control Center and check the first option that it fingerprints. Under registration or change fingerprints, you will find option run interactive tutorial with exact explanation how to use the fingerprint sensor and your fingers correctly.

  To be honest, I do not think you have a hardware or software problem, but you must be careful how you drag your finger.

• Satellite L300 - 11G XP (Home, Poland): Hibernation does not work

  Hello
  I bought my computer without OS, I installed XP and drivers (but I could not find info on the order appropriate to the installation of drivers - y at - it all?)
  Everything works without hibernation.

  Standby power dosnt see this function
  Turning off the energy saver and turn on this option under XP (it's in the window with the screen savers - I don't know proper name) causes an error and the information that another process is using Hibernate

  Are there missing drivers?

  Darek

  Hi again,
  I'll try to ask my question in a more coherent way ;-)

  Material:
  Toshiba Satellite L300 - 11G
  Brief model number: PSLBCE-00F00EPL
  (Made 2008-05-24)

  OS: Windows XP, home edition, Polish version

  Problem:
  (1) hibernation is not present as an option
  energy saving
  (2) hibernation may not be enabled in Windows XP Power Management - communicate the resulting error says that "another process is using this function.

  Is hibernation in someone Thoshiba L300 11 G with windows XP?

  I downloaded all the necessary drivers, but I don't know if I installed them in the proper order.

  I don't know which driver is responsible for the hibernation, so I do not know which to reinstall, change or check.

  Darek

• HP Pavilion mode # 15 - n065: standby / Hibernation does not not on this laptop (model # 15 - n065) (10-window-pro, 64-bit).

  Hello

  I've updated my laptop HP for Windows - 10 - PRO EDITION (64-bit).
  
  Update went well.

  All the drivers seem to be installed device and work.

  Operating system works very well.

  I'm having a problem with sleep / Hibrernation modes.

  When I close the lid for a few seconds and then reopen the lid the laptop does not wake up.

  When the computer goes to sleep it seems to go in hibernation. Even though I disabled the hibernation in the power of the system settings.

  When I press a key on the keyboard of the laptop won't wake up.

  It will not wake up from sleep or hibernation mode.

  I need to power cycle the notebook to log in Notepad.

  My laptop (HP 15.6 "15r011dx with the baytrail-M Intel Pentium platform) works very well with Windows-10 and wake up very well to the mode sleep and extended. So, I know what present works with Windows-10.

  How can I fix?

  Do I need to install other drivers/software?

  This feature is not supported on this HP laptop?

  Thanks in advance,
  Alex

  -----------------------------------

  My hardware:

  HP Pavilion 15.6 "laptop with Intel-Core-i3 4005U haswell CPU (model # 15 - n065)
  Product # E8B13UA #ABA

  ------------------------------------

  

  Hello

  Please find the link given below might help you solve your problem.

  http://support.HP.com/us-en/document/c03383935

• Tecra 9000 - left speaker does not work

  Hello

  the left speaker of my Toshiba Tecra 9000 no longer works.
  Strangely, the right one still works perfectly.

  As far as I can tell this is not a problem concerning the links between the speaker and the motherboard.
  I disassembled the laptop to check if the connection and firmly plugged it.

  Any ideas what the problem may be?

  Thank you.

  Hello Peter

  As I see that you started several threads with different themes on your old Tecra 9000. I don't know where the condition is your Tecra but according to your assignment, you have disassembled the laptop integer. Have you taken some disassembly instructions or you did at your peril?

  What about the speaker? Check all sound settings or player settings you use. Maybe left speaker off ot the sound is set to the right speaker only. If nothing is done it is possible that left speaker is defective. Tecra 9000 is old enough for laptop and everything is possible.