Satellite C660-1me - bluetooth & Wlan operate within the same radio frequency

Similar Questions

• Tecra M6-EZ6612: Bluetooth and WLan operate at the same radio frequency range

  Hi all

  I have a laptop that is Tecra M6-EZ6612...
  I have a problem that when I install the bluetooth I have a massege indicating a conflict between the wireless and bluetooth...

  Two of them are working in the same radio frequency range!
  So, I wonder how I can change the frequency range of the bluetooth device? !!!

  Not like about it. Material Bluetooth v1.2 or v2.0 have included technology called AFH = "Adaptive Frequency Hopping" that tries to avoid conflict with WLAN. It can only be a problem if you have a very old hardware BT (before 2004).

• Error: Bluetooth + WIFI works within the same radio frequency

  When the wirelessLAN is open and then press Fn to open bluetooth this error pops up, please help me to solve this

  ERROR:
  Opearte to device Bluetooth (TM) and wirelessLAN in the same radio frequency range and may interfere with each other.
  If you use bluetooth and wireless LAN devices at the same time you occasinally network performance optimal experience or even lose your network connection. In this case always stop your operation of LAn wireless or bluetooth.

  Hi mate
  It is simply to solve. You must use the BT or Wlan.
  So, if you use BT connection, please turn off the WiFi and if you use Wlan, then disable the BT

  In order to disable the WiFi or BT please use the Fn + F8 key combination you press this several times until the option has been disabled.

• BT and WLAN works within the same radio frequency range?

  Damage Bluetooth and wireless LAN operated in the same frequency range and may interfere with each other

  I do what is not your problem, but the fact is that you can use both devices at the same time. And it works perfectly.
  Just for example: I hear web radio, use a BT headset and my laptop is connected to WIFI. No problem at all.

• Satellite C660 - 1ME - the missing BIOS boot screen

  I updated the BIOS on my Toshiba satellite C660 - 1ME to version 1.20 - WINNER of the Web from Toshiba site.
  After the missing BIOS boot screen, so that now my laptop starts directly with the Windows startup screen

  I tried pressing any key at startup, but nothing happened
  I tried to re - install the BIOS (old and even new version), but I got error that I have "identical or newer BIOS version..."

  can you help me please?

  > I tried pressing any key at startup, but nothing happened
  You mean F2, F8 or F12?

• Satellite C660-1ME - sometimes more often hangs when connecting to internet

  Hi, my laptop is Satellite C660-1ME

  It blocks sometimes more often while connecting to the internet, and several times when I m working in eclipse IDE.

  The shot is so that everything is locked, same mouse doesn't have a movement and Ctrl + Alt + Delete does nothing and finally I have to hold the power button until it has adjusted or pull the power cable on.

  Everyone this experience or know where is the problem?

  Hello

  The description of your problem is too general and it is not easy to understand what exactly you do.
  Connection of internet statement is not easy to understand. Who knows what kind of connection use you page your visiting or whatever you usually do.

  Have you noticed this problem on the first day?
  Are you using the original OS that you got with your laptop?

  Where to start our discussion?

• My Satellite C660-155 won't boot to the top

  My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

  It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
  Any advice would be greatly appreciated.

  For better understanding, you must offer more specific information.
  You can enter boot options using F8 at startup?
  Figure option fix my computer in the list?
  You can boot OS in safe mode?

  Did you create the recovery disk?

• Satellite C660 freezes when WLan connection to WPA encrypted networks

  Hello everyone

  I have a toshiba satellite C660-A259 (Middle East version).
  The laptop is great, but it has a major problem.
  Whenever I try to connect to WPA / WPA2 networks, laptop computer freezes completely during the connection, dragging me to hard it boot.

  Sometimes it connects to wpa networks then hangs after some time, or with success connects but freezes on stop. However, the laptop connects without problems to networks with WEP encryption, without any security or via ethernet networks.

  The wireless network adapter is Atheros AR9002WB-1NG.
  I tried to update the software for the adapter on your support site, but it did not work, he did the wireless not working not at all, so I used sytem restore to return to normal.

  Please help and thanks :)

  > I tried to update the software for the adapter on your support site, but it did not work, he did the wireless not working not at all, so I used sytem restore to return to normal.
  Can you please tell us what is normal? Is the State of natural plant or perhaps you use your own installation of the OS?

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• Link chart action for refreshing a report of region within the same page

  Gurus of the APEX

  As long as we have the graph and report region region on the same page and based on the action of graph link must be able to refresh the report region within the same page

  for example: I expense spend by category such as a pie chart and on the link of the action of which I want to refresh a report region by the right of it (in the same page) to show the details contained in this category spend - also I do not have to réactualisiez around the same page, just to refresh the region related to the category Click on the graph

  Any help would be great on this - I use APEX 4.2

  Thank you

  Shas

  Thanks Tom / Scott - sound now worked

  Following my code for the javascript function in the page section,

  function clickPie (pID) {}

  $x('P4_ITEM_CATEGORY').value = pID;

  $('#CategoryDetailsDD').trigger ('apexrefresh');

  }

  And here is my URL of the link graphic action section

  JavaScript:clickPie("#label#")

• Practically in segregation a virtual machine within the same network

  We have a VMware ESXi 5.0.0 (504890) host that has physically 4 network cards. We run 3 VMs on that host and turning a new config. However, this new virtual machine will replace our old Windows DC, DNS, server DHCP etc., and we'd like to config it before going live - will not perform us a migration of swing. We are a little worried that it can interfere with our direct network and that's why I would like to somehow almost segegrate it.

  For the moment, we have a single vSwitch0 linked to all our VMs and management card:

  

  What is the best way to do this so that our new DC (with the same domain name and within the same network) can be configured without it interfering with the current network.

  Thanks for your comments.

  Oliver

  Hello

  You can create a second vSwitch without physical network interface cards. Create a VM Portgroup on this vSwitch.

  You can configure your new virtual machine to use the Portgroup. So, he won't have any connection to your network.

  The good thing is, when you want to test things with a customer, you can create a second VM and configure it to the same VM portgroup on the second vSwitch.

  Two virtual machines on this Portgroup can communicate with them because the traffic is handled internally by the host.

  Tim

• Replying to a virtual machine within the same site

  I try to install vSphere replication v5.1.  I do this without SRM, but just the OVF appliance (s).  We currently have 8 guests distributed between two groups.  We have a vCenter control all this, and all is listed in a Data Center.  The second group is in our DR site and has different storage mapped to it.  I try to use vSphere replication as a means to keep our important VM replicated to our centre of DR disaster.  Is it possible to do so in the only current configuration?

  I'm having a hard time comes to work.  I have deployed two replication OVF devices and I'm stuck trying to replicate a virtual machine actually.  It gives me an error that the data object is not found.  I thought that I needed to 'Connect' from the local site to the remote site, but since this is all a time installing vCenter, I get an error indicating it cannot connect to itself.

  Is what I'm trying to do possible?  If not, could you let me know what I need to change to make it work properly.  Thank you.

  Hello

  The scenario you describe is supported - you can replicate virtual machines from one host to another within the same VC.

  To do this:

  -you will need to deploy vSphere 5.1 replication for a VC and no specific host

  -VR requires VC 5.1. If you liked VC - standalone VR will not work. If you have more recent VC, for example 5.5, you need RV 5.5

  -For replication within the VC even you don't need to link to the target site.

  -Simply select the computer virtual you want to replicate, when you opened a session in vSphere Web Client connected to the VC, point to the same location - must be available in the list, and select the appropriate data store and move through the wizard.

  Kind regards

  -Martin

• Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster

  Hi, I can do storage Vmotion OR Vmotion between Intel and AMD hosts within the same group?

  Thank you

  No, it is not possible to vmotion or storage vmotion between CPUs from different manufacturers - I heard rumors that two manufacturers are working on technology that will help in the future-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• 2 refcursors within the same procedure using

  Hello
  Can we use 2 refcursors within the same procedure. This may seem strange. But I have a script to do so - one to dynamically check for some validations and another to return a result set.

  Yes, pass by the example below.

  CREATE OR REPLACE PACKAGE CURSPKG AS
  TYPE T_CURSOR IS REF CURSOR;
  PROCEDURE (EMPCURSOR ON T_CURSOR OPEN_TWO_CURSORS,
  DEPTCURSOR ON T_CURSOR);
  END CURSPKG;
  /
  CREATE OR REPLACE PACKAGE BODY CURSPKG AS
  PROCEDURE (EMPCURSOR ON T_CURSOR OPEN_TWO_CURSORS,
  DEPTCURSOR ON T_CURSOR)
  IS
  V_CURSOR1 T_CURSOR;
  V_CURSOR2 T_CURSOR;
  BEGIN
  V_CURSOR1 OPEN FOR SELECT * FROM EMP;
  V_CURSOR2 OPEN FOR SELECT * FROM THE DEPARTMENT;
  EMPCURSOR: = V_CURSOR1;
  DEPTCURSOR: = V_CURSOR2;
  END OPEN_TWO_CURSORS;
  END CURSPKG;
  /

  I hope that it would be useful.

• Satellite C660-108 does not start if the USB Bluetooth dongle connected

  Hiya,

  I hope you could help me.

  I'm having a problem with my dongle bluetooth and satellite c660-108.
  It all works perfectly. It connects devices via bluetooth and I can do whatever I want.

  But then when I'm mobile stop and turn it on again it will go if the bluetooth dongle is always in the USB.

  I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  I have to turn it off, remove the bluetooth dongle and then turn it back on.
  And then windows starts. After that, I put in bluetooth dongle, once again I want to work with her.

  It isn't a huge problem, but it is a bit annoying when I have to leave the bluetooth and put it back again to get the windows began.
  I'm running under win 8.1 but he already had with 8 victory.

  Anyone any ideas?

  > I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  Especially the blinking cursor is displayed because the laptop can not find a boot device.

  It seems that the device cannot put on the HARD drive while the USB dongle is connected.
  I would recommend you check the boot order in the BIOS.

  Put the HARD drive in the first place and the USB boot last device.
  Save changes and check if it helps.