BT and WLAN works within the same radio frequency range?

Similar Questions

• Tecra M6-EZ6612: Bluetooth and WLan operate at the same radio frequency range

  Hi all

  I have a laptop that is Tecra M6-EZ6612...
  I have a problem that when I install the bluetooth I have a massege indicating a conflict between the wireless and bluetooth...

  Two of them are working in the same radio frequency range!
  So, I wonder how I can change the frequency range of the bluetooth device? !!!

  Not like about it. Material Bluetooth v1.2 or v2.0 have included technology called AFH = "Adaptive Frequency Hopping" that tries to avoid conflict with WLAN. It can only be a problem if you have a very old hardware BT (before 2004).

• Error: Bluetooth + WIFI works within the same radio frequency

  When the wirelessLAN is open and then press Fn to open bluetooth this error pops up, please help me to solve this

  ERROR:
  Opearte to device Bluetooth (TM) and wirelessLAN in the same radio frequency range and may interfere with each other.
  If you use bluetooth and wireless LAN devices at the same time you occasinally network performance optimal experience or even lose your network connection. In this case always stop your operation of LAn wireless or bluetooth.

  Hi mate
  It is simply to solve. You must use the BT or Wlan.
  So, if you use BT connection, please turn off the WiFi and if you use Wlan, then disable the BT

  In order to disable the WiFi or BT please use the Fn + F8 key combination you press this several times until the option has been disabled.

• Satellite C660-1me - bluetooth & Wlan operate within the same radio frequency

  My alptop is Satellite C660-1me
  I downloaded all the drivers from the toshiba site, today only a window appeared, says the following:

  + bluetooth and lan devices operating in the same range of radio frequency wireless and may interfere with one another.

  Can u please help to figrue the problem and solve it.

  Thank you very much

  Hello

  This isn't a problem, but it is a simple system reviews.

  This means that your WLan works according to the same frequency as Bluetooth.

  Usually the 802. 11 B and G WLan standard using the 2.4 GHz and this frequency is also used by Bluetooth

  So if you use WiFi, disable the BT NOT to use two devices at the same time!

• Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster

  Hi, I can do storage Vmotion OR Vmotion between Intel and AMD hosts within the same group?

  Thank you

  No, it is not possible to vmotion or storage vmotion between CPUs from different manufacturers - I heard rumors that two manufacturers are working on technology that will help in the future-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Is it possible to work with Muse on two different PCs and to work on the same files at the same time?

  Is it possible that two people work the same files with different PC edition?

  No, this is not possible.

• How can I make the portable speaker and headphones works at the same time?

  my sound card is a device high definition audio

  Hi Bernard,.

  It is not possible to use two devices at the same time in Windows 7.  You can have only one default device at a time.

• Keboard and Touchpad 355 G2: Does not work at the same time

  Hello

  I am trying to configure my laptop for games, but I can't get my touchpad and keyboard work at the same time. I tried to disable palmcheck but that did not work. Anything else I could do?

  Thank you

  Hello

  Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.

  You too, can be able to work around this problem as follows.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  Version of the Synaptics 17.0.18.8 driver

  Disable your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.

  If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

  Note: If it does not, your existing driver are here.

• How to put in place two sound devices and make two of them work at the same time?

  I am on Windows 7 Ultimate and I have a problem...

  I downloaded the SRS Audio Essentials software that improves the sound quality

  And I have Realtek audio device which is an audio driver that come with bulit in sound card

  But the problem is that I can choose only one of them as the default audio device

  When I was with Windows Xp, two of them worked at the same time...

  He is the captain:

  http://www.Flickr.com/photos/96392754@N07/8812378555/

  Help, please!

  PS: Sorry for my bad English... ^_^

  Hello

  Unfortunately this does happen, as it is by design,

  Here, a single device can be marked as default device, follow these steps below for more information.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• Why use push and pop where addChild and removeChild can do the same work?

  Why use push and pop where addChild and removeChild can do the same work?

  What is the advantage of the push and pop on addChild and removeChild?

  It depends on what you're trying to accomplish. If you explain more about under what circumstances you would use them, a more definitive answer can be provided.    Push and pop of the work for arrays.  addChild and removeChild work for displayObjects.

• When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  Please close Lightroom and then go to the following location in the Explorer: C:\Users\UserName\AppData\Roaming\Adobe\Lightroom\Develop Presets\User Presets

  Paste the predefined settings file in the location above, then try to open Lightroom and control the Module Development, if you are able to display Presets or not.

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.