Tecra M5 - sound only works if Win XP SP2 has been loaded

Similar Questions

• sound only works on some programs

  sound only works on some programs able to get on wmv, audio mp3, all sound tests but still unable to hear any sound on all links. The problem started when the sound volume icon disappeared from the taskbar, also the expander to the taskbar control disappeared at the same time. Place the volume in the taskbar icon is enabled, the icon is still missing from the taskbar. In Manager devices under IDE ATA/ATAPI controllers, that I had 2 primary and 2 secondary channels, try updating the drivers 1 primary and 1 secondary driver do not have be updated because they were later. Other primary and secondary drivers have been updated and listed as primary channel VIA ATE & secondary channel VIA ATE. Both these have an error this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Tried to uninstall & reinstall nothing doesn't. Can anyone help thank you FOR

  Well, punctuation, capitalization, and enablers would help make your readable phost!

  Do you mean that you have no web sounds? If so, make sure "Play web pages" or similar is verified in any browser you use.
  What did you win by dating the ATA drivers?
  You must identify your audio driver and the update.
  Go to the website of your computer manufacturer and obtain the correct drivers from there. If you PC, then go to the MB manufacturers website and get the drivers from there.
  Code 31: you managed to corrupt your audio drivers. Do as above.
  See you soon,.
  Jerry

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Envy Touch: Sound only works for about 1 hour after I restart. Then suddenly stops.

  Product: HP ENVY Sleekbook 4 t-1000 CTO

  Model: KD1A99UA #ABA

  Operating system: Windows 7

  When I restart my computer, my sound works for an hour or two and then suddenyl turns off. It does this with or without a helmet. It works again as soon as I restart the computer, but I would really do not have to restart my computer every hour just to get the sound to work.

  Also-download of Windows 8 is not an option because a large part of my work is incompatiable with windows 8

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K

• Shortcut won't work properly as a shortcut has been changed or moved

  The point "trying to run program' that this shortcut refers to has been changed or moved, so this shortcut is no longer properly___Do you want to delete this shortcut?

  When I download things I have this problem happens with shortcuts. I also downloaded Avast AV and it works fine until I reboot then it does not work, the shortcut is gone and I can't run it. When I do a complete analysis of the system there is no virus on my computer. How can I fix it?

  Hi Aequitas009,

  A. is - what is happening with all the programs installed on your computer?

  B. you are having this problem only with shortcuts?

  If the problem is with the shortcuts, then you can try to create new shortcuts. If the problem persists, then you can create a new user account and check the status.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Add or remove icons on the desktop
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-icons-from-the-desktop

  How to create a shortcut on the desktop
  http://support.Microsoft.com/kb/140443

  Steps to create shortcuts

  Step 1

  1. click on start > all programs

  2. right click on the application > Send to > desktop.

  Step 2

  1. click on Start > computer

  2. double-click on the C: drive > program files

  3. Select the application and open the folder

  4 right click on the application file (file type must be application) and choose the option to create a shortcut

  5 you can drag and drop the shortcut.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• None of my apps work after that my laptop has been infected with the virus Vista Internet Security 2010,

  Hi all
  I need help to get my computer back to normal.

  My laptop has been infected with the virus Vista Internet Security 2010, but I removed it, NOW none of my apps (Yahoo Messenger, trash, other folders, SYSTEM, all file icons restore,) work, I managed to get rid of the virus visa, but still none of the programs work. When I try to open any program, it displays an error message "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel. " I did all the steps, but still nothing works now all my files are open with the same file. I try to download a program to fix this problem, but I'm not able to run cause keep giving me the same error and cannot download anything. Is it possible to recover my computer as usual. Any help much appreciated.
  Help, please.
  Oh also all the icons on my destop are replaced by the same feacture of icon, but the name of the icons are staying same.if it shows adobe icon and all icons are adobe, when I open it with ie, then everything will change IE also. even if the opening programme has also changed to the same icon as dekstop one. now all my things are open with yahoo messenger:(c'est fou:()

  Try restarting your PC and press the F8 key repeatedly and then start in safe mode with networking and download and comprehensive performance analysis with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If this does not work, try to run Windows Defender version offline beta:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  You can take a look at:

  http://cyberdefend.WordPress.com/2012/01/07/boot-Windows-for-scan/

  If the problem has not resolved, then contact Support for Microsoft Security:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&task=Diagnostics&mkt=en-us&St=1&wfxredirect=1

• the sound software is not installed properly or has been disabled

  Hi, I have windows 7 and I try to run a program called history of eyewitness to the world its GSP or dorling kindersley, I get the error message saying the sound software is not installed or has been disabled.

  See:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Sound only works if I constantly change the volume control.

  Hello

  The sound on this Dell Inspiron One 19 t works only if I jiggle the volume control constantly.  The drivers are up to date and the only thing I can add is that this problem started when I reinstalled Windows 7 after a BSOD.  I tried to use Puppy Linux using a live CD, and even who could understand the question sound, even if it has detected the sound architecture right and everything is configured.  Just always had this problem.  So now I'm using Windows 7 and have installed all the updates and still I can't hear sound if I move the slider volume up and down.  It is therefore completely useless without good audio playback.

  I searched and searched on the internet and it doesn't seem to be a very common problem, and nobody is mentioning the same problem with the conexant smartaudio driver windows 7.  In any case... I'm a little sick of these computer things now... just full of bugs provided by companies billions of dollar, which tends to support you unless you pay them $ more.

  Please do not answer in an audio format or I won't be able to hear it :)

  The currently installed driver may be reported as the latest version, but he could have become corrupt and therefore not working properly.

  So, even if the driver is updated, you might find that download and install the driver from the Dell support site will fix the problem.

• Sound only works in the helmet and no sound from speakers

  My computer sound laptop windows 7 is extremely low, even if the volume levels are at the top. I tried different options such as the restoration of the system, change some things on playback devices, uninstall the drivers, etc.. Nothing works, sound remains the same. The sound is fine only with headphones.

  Moved to correct the article

  Hello

  Please keep us updated on the status of the issue.

  I suggest you to update the BIOS and the sound card drivers from this link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5186413

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps.

  Thank you

• Sound only works at startup

  Sound

  I hope someone can help!

  If I start or restart my computer, my sound works, but once I have use 1 or several times, it stops just the volume icon disappears also.

  I have a laptop about 2 years and has windows vista... it's as far as my knowledge goes.

  Thanks in advance!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Read the above.

  If the above does not fix it:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• computer laptop 15-f010wm: Wifi works do not since fan has been replaced and loaded Windows 10

  I download windows 10 on this laptop, and suddenly the wifi disappeared. After that I got a fan error code and I replaced the fan. Now I don't have ethernet. Is there something I have for the material when the laptop back together OR has windows deleted 10 and must be released. I've only ethernet, no wifi adapter listed in Device Manager.

  Can anyone help?

  Hi @vic4455,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the WiFi connection. I'll be happy to help you.

  I would check the connection inside the computer.

  Here is a link to download the latest drivers for Realtek RTL8723BE/RTL8188EE 802.11b/g/n Wireless LAN Drivers.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• My acrobat professional 7 does not work on win 10

  My acrobat professional 7 does not work on win 10, someone has solved this problem? Thank you very much

  Due to changes in windows, Acrobat 7 (all variants) will not properly install and run on any version of Windows after Windows XP 32-bit.

  You must upgrade to Acrobat DC.

  -Dov

• Need help to install on win xp SP2, hp 8300 elite raid drivers?

  I spent to win 7 on HP elite 8300 for win xp sp2. I did this because I had to install a specific software that only works on Windows xp sp2. And now I have the problem with the raid drivers. I need help how to install them, and I don't know if I downloaded the right one.

  Maybe the only solution is to insert sort this driver in the instalation of win xp cd because I don't have floppy drive.

  HP elite 8300

  SERIES:[personal information]

  PRODCT NO.: B0F31EA #AKQ

  Hello:

  Please read the info on the link below on how to integrate the SATA/RAID drivers.  Read the Intel section and read the document about how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The drivers from the link below allows you to integrate. Second listed file is what you need for XP 32 bit.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21730&ProdId=2101&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType=.

  The real driver you need is the controller RAID Intel® Express Chipset SATA Desktop/Workstation/Server. But all by wake.