Tecra M7: Buttons of the Tablet producing numbers - bad signs

Similar Questions

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?

• Why the buttons of the table in a bad position only on Firefox?

  http://aandrroofing.com "project gallery" and "contact us" buttons appear below bottom of table and high background appears below them. Works perfectly on IE and Chrome.

  With regard to the positioning of the button: you have a tag paragraph inside these cells in a table of four:

  <td>
   <script>... </script>
   <p>... </p>
  </td>
  

  Normally, a paragraph element has an upper and lower margin equals the standard height of a line. Internet Explorer removes those margins when they are adjacent to the top and bottom of a table cell boundaries. Firefox does not work.

  In this case, it would be simpler to delete the p tag, because there is really nothing obvious.

  If you choose to keep the p tag, you need to remove these lines yourself. You can do this manually by adding an inline style to the tag:

  <p style="margin-top: 0; margin-bottom: 0;">...
  

  Or you can add a CSS rule to make it around the world. It is somewhat complicated by the fact that you have another (script tag) tag before the p tag in your table cell, so I'll refrain from publishing a convoluted fix and recommend go with either of the two previous suggestions.

• Portege M700 with Windows7 / problem with assignment of the tablet buttons

  Hello

  After the upgrade of my Portege M700 Windows 7, most of the hardware seems to work.

  One exception are the tablet buttons to adjust the orientation of the screen, or to be used as replacement of slider. When changing the mode of the Tablet (e.g. for the entry of notes during a meeting) the original installation (VISTA) offers certain functions by the buttons on the Tablet (e.g. moving cursor, new page, scroll through the pages etc.). But it seems that these buttons are predefined for some functions of windows and I don't know or find no tool to change that.

  I installed the latest version of the utilities TOSHIBA (util_tvap, value added package) but can't find any tool to affect the proper functioning of the buttons on the tablet.

  Tips how to handle this?

  Thanks in advance...
  Peter

  You have upgraded your Portege laptop using Toshiba upgrade kit or you have installed the clean version of Win7?
  Usually, when you perform the upgrade using the Toshiba upgrade and upgrade pre-installed Vista everything should work properly.

  You also have the latest version of the BIOS?

• Unwanted shift line brush at random during the use of the brush and the eraser on the tablet + mac

  I use a Cintiq 22HD on a Macbook Air, and whenever I use the brush or eraser it will create a line as if I held down the SHIFT key, about 60% of the time. I have no button on the tablet that is assigned to the shift key and the SHIFT key on my keyboard is not stuck like I can type perfectly well without seeing random capitalization. It is impossible to use, does anyone have an idea on a fix?

  I posted this before and reset preferences doesn't solve the problem.

  I thought about it. I pushed too much information at once via the single usb port on my mac.

• Cannot make the Tablet and desktop phone versions

  Hello

  I made my desktop layout site and then clicked on Tablet and phone versions in the menu bar, but nothing happened. Do or I missed something before clicking the button of phone or Tablet? First of all, please see the screenshot below.

  [Desktop version]

  

  At this point, I clicked the button on the Tablet, but nothing like this. I don't see anything. Why the presentation of the Tablet is not import or take any content from the office layout? Of course, I chose the option by default when I added the shelf layout.

  [Version tablet]

  

  Thank you for your help in advance.

  Hello

  When you click on "Phone" or "Compressed" layout, it asks if you want to copy on the site map, the browser and the page attribute fill. You must select 'Desktop' in the ' copy to ' drop-down list as well. Check this: http://screencast.com/t/fP6UCI6D66m9

  That being said, when you copy more of office of any other provision, it never copies the content, it will copy the three properties above.

  I hope this helps.

  See you soon

  Parikshit

• Tecra M7: Problems of Vista with the evolution of the functions of the tablet buttons

  Why he isn't an American version of this forum I'll never know...

  First question: when I try to change the tablet on my Tecra m7 said button buttons he has changed, but it is not what I said at. For example, I want to put the right arrow on the multifunction for flip 3d button. The right button still more arrows as he did.

  Second question: the size of the screen, effects are missing in vista. you know that little thing of the window that appears when you set the volume, and then goes after completing Windows xp? Yah that's all. Am I missing some kind of driver or something?

  Thanks in advance

  Hello

  Where to download your drivers and tools? Perhaps it sometimes different versions for the same model but different types of this model.

  I suggest you reinstall this software and especially the drivers for this machine. If you couldn t find something on the USA or the European site (which you visited I think)
  You can try it here:
  http://209.167.114.38/support/download/ln_byModel.asp

  It s the tosh's Canadian Web site. They sometimes had tools and pilots including an another tosh sites Don t have. :(

  So just try it, and if you didn t find anything just make a comment and we will continue on the resolution of this prob.

  Welcome them

• Portege M750 and Win8.1 Pro - the tablet buttons do not work

  Hello

  I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.

  In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.

  I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?

  > I don't know that I have installed all the drivers who wverything work with Windows 8

  Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1

  As much as I know the Toshiba can't win on this Portege M750 8.1.
  This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.

  You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver

  So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver

• [Helix 2nd generation] Reconfigure the tablet buttons

  Hello world

  Is it possible to reconfigure the keys on the Tablet, specifically the autorotate button on / off? Would love to instead assign a script (file * .bat) to what I wrote to switch on and outside touch screen (by release ultimate palm).

  Thanks for your help!

  Moritz

  FYI: ATNSOFT Key Manager does the work!

  SOLVED.

• Satellite L670-12J - need to install the tablet on laptop buttons

  Hello

  I have the problem "tablet buttons are not installed on this computer.
  I have connected a drawing tablet, but cannot access the settings of the Tablet because of this.

  I don't know which driver should I install, can someone help me please?

  Thank you.

  To be honest, I think that this isn t Toshiba related issue.

  I mean the laptop satellite L670-12J seems to work fine and you have only a problem with the installation of a 3rd party drawing device.

  In my opinion, you should check the support page of the tablet manufacturer how to get this working of the unit.

  Maybe, you need to install some software/driver that is provided by the developer of the Tablet?

  Check it!

• button with the custom numbers, ordered regular not

  I don't know if this is the right place to ask this question!

  in any case

  I need to make the button with the numbers of entry as

  1 2 5 10 20 40 80

  I wonder if there is a way to do

  

  GoTo properties of the button and the text for markers of scale labels

• Cannot get the buttons on the side of my tablet moniter to work.

  I searched all were in the control panel and on my computer to find a way to move the buttons, known as the tablet buttons to work, their supposed to do things like rotate the screen or be shortcuts to media players or settings in tablet mode. I have nothing works. I have a 2000 Hp compaq tablet. any ideas on how to get them to work?

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above link > 'See support and troubleshooting information' > key in your model number > manual on how to use it will be held.

  See you soon.

  Mick Murphy - Microsoft partner

• I need to pin a button at the top of my Tablet and phone versions

  I need to pin a button at the top of my Tablet and phone - pin code option versions does not work - and I tried to put the motion scrolling values to 0 so that it doesn't scroll - HELP - it doesn't work and I can't believe that it is not a simple solution to a basic problem!

  Affecting the scrolling of the query parameters (all) 0 should work.

  Make sure you have your selected menus. If this is not the case you can take a screenshot of your selection and settings. Perhaps, we can see something else.

• A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  Select the text and use the Warp tool to give a fake italic.

• I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.  I want to make a collection of web.  I clicked on the tap WEB and then clicked on the button "Import" in the lower left.  All

  I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.

  I want to make a collection of web.  I clicked on the WEB site tab and then click on the button "Import" in the lower left.  All the images changed position.  Anyone know what I did wrong?

  Hi Peter,.

  If some how changed the order sorted, you can go back sorting to 'Added A order' in the toolbar.

  or, choose all the photos and click the view menu and sort to choose the sort order.

  Also, here is the tutorial link to learn more about creating web gallery in Lightroom:

  https://helpx.Adobe.com/Lightroom/help/creating-web-galleries-basic-workflow.html

  Kind regards

  Claes