Tecra M7 - features of the utility of logon access Code

Similar Questions

• Tecra 8200: update BIOS: the utility is not available in V86 mode?

  I want to update bios for Tecra 8200, but is to show "the utility is not available in V86 mode."

  Please help me

  Hello

  James is quite right. To use this device there is only an update of the traditional BIOS available. If you want you can consult the FAQ update of the BIOS page. You can find it under http://www.toshiba-tro.de/gcc/biosinfo/index.html

  Good luck!

• The extreme inputing airport access codes

  I intend using Airport Extreme in conjunction with an amplifier of Rogue Wave WI - FI. Hot spots that provide a signal often provide an access code. How would that enter the airport?

  The way it comes to your question, it seems that if you plan to have AirPort Extreme connect to a signal provided by another router Wireless / WiFi amplifier.  Is this correct?

  If this is not the case, what exactly will connect what and how the features of connect?   Wireless?  Wired Ethernet connection?

• Bypass the power on the s HP 6720 access code.

  What is the power on the access code? How do you work around it?

  Hi Jessiortiz,

  1. when exactly are you getting this?

  2. did you of recent changes on the system?

  You can check out the link to HP support and see if it helps.

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-Compaq-slate/power-on-password-6720s-TPM/TD-p/928296

  You can also get in touch with HP for assistance.

  HP support

• The activation of the feature in the APEX very specific access control

  Hello
  
  does anyone know how to do?
  
  
  Reading around it seems that this characteristic to be able to provide online access control is only a part of the Enterprise edition. However, it certainly is not because there is a tutorial on how to implement that in the APEX. However, when I write that it comes up with the error above, however characteristic is not activate. It comes to mount the virtual private database that allows you to access control of line.
  I guess that the line of code that would mean ' private access is one that says: policy_function = > "user only.
  
  
  BEGIN
  DBMS_RLS.add_policy
  (object_schema = > 'data_schema',)
  object_name = > 'EMPLOYEES. "
  POLICY_NAME = > "EMP_SEL_POL"
  function_schema = > 'HR ',.
  policy_function = > 'USER_ONLY ',.
  statement_types = > 'SELECT');
  END;
  /
  
  
  
  
  Thank you very much
  
  Published by: Alvaroe on February 3, 2010 10:37

  Fine-grain Access Control (MEV) is a feature available only in the as detailed here http://www.oracle.com/database/product_editions.html Oracle database Enterprise edition
  If you have a license for the EA, then you can exercise the hooks which provides the APEX in interface with the VPD policies defined in the database.

  CITY

• How to change the win8 international dialing access codes

  By default the international dialling code for my country is 00. I want to change it to 01 X.

  In previous versions of windows, the solution was to edit the Telphon.ini file, but I couldn't find in Windows 8.

  No one knows how to do?

  I don't have an answer to that.

  I solved it by using the option of calling card in 'phones and Modems.

  I created a new calling card in which the sequence of composition includes the prefix X 01, I need to get the international provider of my choice.

• Error in the printer I don't have correct access codes to print on the printer to work

  Original title: impression of the printer

  Hey,.
  I work in an office with my personal laptop, the Office has a network, Xerox Workcentre 7845 printer and it was connected to my laptop that allows me to communicate with the printer. However, the printer requires an access code to be able to print because it is shared between the different offices in this building. I have the access code, however, every time I try to print documents it prints an error message saying that I don't have the appropriate account codes. The problem is that I was never prompted to enter access code. How can I get invited to enter this code, so I can start printing? Thank you

  Hi Albert,

  I suggest you to contact the network administrator for your network and check. If the network admin is unable to find the solution, then you can post your request in the TechNet Forums, which is the best place for these issues.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  Hope this information helps.

• Tecra M3: Cannot get the SD memory and utility boot Format to work

  Format SD memory Boot utility does not! (Tecra M3)
  SD memory boot utility and install utility Format Software memory SD fine with no problems. But they both then return an error when you try to start a program.

  Utility boot SD says:
  Unexpected error! 00-52-FF02-126 error code

  SD format utility says:
  Unexpected error! Error code = 0x0034FF02

  After clicking on this message box appears the window of the program, but there is no drive to select. There is an SD card into the SD card reader slot, but still he does not come to the top.

  I run Windows XP pro, office 2003 against Tecra M3.

  Help, please! Do you know of any other (free) software to use the brand so a bootable SD card, or how to fix these errors.

  Hello

  Sorry, but your ad confuses me completely. If you did clean using the delivered OS install why you should install ConfigFree recovery media tool?
  TOSHIBA ConfigFree tool V5.00.48 is undoubtedly part of the recovery image and if you use recovery image you should NOT install anything. On this way unit is completely configured.

  The recovery image contains the operating system, all necessary drivers and Toshiba designed tools and utilities. After the installation procedure and first departure all the pieces of equipment work harmonic if there is no any kind of hardware malfunction.

  Only thing you need to do is to install own application you need for work (office or any what editing application) or games for fun with Notepad.

  If you have another question please write again.

  Good bye

• How to use the utility to update (uefi) BIOS HP

  Notebook: G62 a10em

  I downloaded the BIOS update tool from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 4226...

  and it is installed on my USB key.

  Now, how can I update my bios?

  The USB key contains now:

  BIOS

  | - Current (empty folder)

  | - New (empty folder)

  | - Previous (empty folder)

  BIOSUpdate

  -CryptRSA.efi

  -CryptRSA32.efi

  -HpBiosUpdate.efi

  -HpBiosUpdate.s09

  -HpBiosUpdate.sig

  -HpBiosUpdate32.efi

  -HpBiosUpdate32.s09

  -HpBiosUpdate32.sig

  my current version of bios is f. 08

  I did a cut above.

  After looking at the appropriate file you downloaded, it says this:

  "Prerequisites .
  -Microsoft .NET 2.0 is required. UEFI and Custom Imaging - the HP BIOS update must be run from a FAT or FAT32, partition with a volume of the "HP_TOOLS" name This Installer gives you the option to install on the hard disk (HDD) or USB. If you install on the HARD disk and the HP_TOOLS partition is not present, Setup prompts to create the HP_TOOLS partition. If you install on a USB key, Setup renames the partition on the USB in HP_TOOLS. If you use a custom image, you can create the HP_TOOLS partition manually with the type FAT32 and that the volume HP_TOOLS name. ATTENTION:-the UEFI system partition is not protected and can be removed. -Backup of the computer by using the complete PC Backup feature of Microsoft Windows Vista does not save the UEFI system partition. For these reasons, HP recommends that you place no additional data on the UEFI system partition. Because the partition is not backed up, corruption or failure of the partition will result in the loss of all data on the partition, as well as the loss of UEFI functionality. "For more information, visit: www.hp.com/go/techcenter/startup"

  There is little documentation on how to use it, but a Member here figured it out.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/envy-14-system-recovery-doesn-t-work-with-latest-BIOS/m-p/328684/highlight/false#M45165

  using Windows 7:

  Just plug in the USB key and then run the SPnnnnn.exe BIOS file downloaded from the Web site drivers HP.

  Assuming that the USB is configured correctly (see below), Setup the BIOS sees the HP_TOOLS partition on the USB, copy of the BIOS and its file signature on the USB key, then run Setup winflash. The system BIOS detects the USB and the partition HP_TOOLS and the BIOS is magically updated.

  I put in place a new USB key as follows:

  1 rename the partition HP_TOOLS from the hard drive to something different like HP_TOOLSbak

  2. Plug the USB

  3. Download and run the utility to update the BIOS (not the BIOS, still) drivers HP support page.

  4. Select the option to install to a USB

  5. Select the option to create the partition HP_TOOLS

  6. The reader should now be formatted as HP_TOOLS with a record of Hewlett-Packard containing BIOS and BIOSUpdate records. The BIOS folder contains empty current, news and previous records.

  7 download and run the HP System Diagnostics (UEFI) MS drivers HP support page

  8. Select the option to install on a USB key. This will create a SystemDiags folder under the Hewlett-Packard folder

  9. Download and run the HP Notebook System BIOS update for the HP support page drivers, given that the USB is correctly tagged it will install the update of the bios on the USB drive

  10, we have to end up with a HP_TOOLS partition on the USB drive identical to the one that you removed from the hard drive.

  Once you have configured the USB drive, you can upgrade to other versions of BIOS (most recent or oldest) using this drive, as I mentioned above: just plug in the USB and then download and run the BIOS Setup program.

  Having said that I'm not sure of what you do, once you boot the USB drive.

  .

• Tecra A7 still sees the AC adapter - even if not connected

  Hello

  I've had this problem for awhile now. It happened quite suddenly, one day it worked great, the other day and the following days later, it didn't. The problem is like this:

  My Tecra A7 still "sees" the adapter connected, even if it's not! This can be quite annoying if I turn the laptop on its battery, because it will automatically run on full power b/c of the Toshiba power management utility is installed. That said, running at full power, the battery is discharged very quickly. Beside that, if it is disconnected from the net power for some time, the laptop battery is draining, even if turned off all the time!

  Of course, the problem is not huge. I can always manage the electricity utility myself if necessary, but as you can imagine this probem is quite annoying. And I really want a solution to this problem.

  If someone knows the solution?

  Thanks in advance,

  Arjan

  Hello

  That means the power icon in the taskbar says?
  Have you noticed changes especially after connect/disconnect the power adapter?

  I think it might be a software problem
  I mean the energy saver.

  You he should remove the system and needs to be reinstalled the version downloaded from the European driver from Toshiba site.

  See you soon

• Tecra R10-120 - HHD Protection utility installs in Portuguese

  Hi all

  I'm new here so I ask you please help the statement a little bug in "HDD protection Utility" when installing on Windows 7 RC1700 version.
  I downloaded the file "hddprot-20081124153035. ZIP"from Vista 32 drivers and utilities for Tecra R10-120, and there the 2.0.2.5 version from 24/11/08.

  My Windows 7 (32bits) is configured as:
  To install language: English
  Time and currency formats: Portuguese (Portugal)
  Keyboard or input method: Portugal

  During the installation procedure installs "HDD protection Utility" in Portuguese.
  I guess the code keyboard or time controls parameters of format rather than the language of the system.

  This is a minor bug, so I think it will be simple for the Toshiba development team to resolve.
  The only forward to point is, how to let them know.

  Thanks for any help that you could provide,

  Hello

  You have the beta version of Windows 7.
  The utility is designed for Windows Vista.

  Check if the same thing happens with Windows Vista?

• How to use the utility of recognition of face on Satellite L350D

  Hi all

  I am trying to understand how to use the utility on my laptop satellite L350D-131 face recognition but won't have any look.

  Can someone tell me how to use / start this feature please?

  It should come a manual or a tutorial how to use this tool. I'm not an expert in the field, because I saw this feature only on a laptop in the stores. But it is a security feature nice little addition to the fingerprint system.

• Only supports the utility of fingerprinting the Chrome latest version 21

  Hello!

  The latest version of Chrome is 21 and this version is not compatible with the utility of fingerprint digital (I use the 2.0.0.6409).

  So I tried to install the last Fingerprint Utility (fp - sw - 20120710162925.zip, version 2.0.0.9) but the installer should hang at some point, because I never get to see the installer itself, I see only the unziper (aka THOSHIBA Archive extractor).

  So I don't know what to do to make it work.
  Made the 2.0.0.9 FP utility version supports Chrome 21?
  I can't find any info about this :/

  Thanks in advance :)

  PS: I have a Tecra R950

  > So I tried to install the last Fingerprint Utility (fp - sw - 20120710162925.zip, version 2.0.0.9), but the installer should hang at some point, because I never get to see the installer itself, I can only see the unziper (aka THOSHIBA Archive extractor).

  I think you should download the package once more.
  Then right click on the zip package and unpack the files.
  Then you should see an exe, the exe file is too compressed so you must unzip this new.
  Right-click and select Extract here.
  Now you should see some files and now you should be able to run the installation.

• 'the disk check utility requires exclusive access to Windows__files on disk' (my hard drive). "Re-start of Windows. __

  FAILED: attempt recovery of bad sectors (disk hard C)

  I followed the instructions to increase the speed of the PC on the home screen of the box to highlight the function of microsoft.com.

  I could access the program successfully on my home screen (Windows XP Edition family version 5.1 service pack 3.0).  Phase 1 of the scan completed successfully, but about 70% through the phase 2, the analysis stopped and I got this message: "the disk check utility requires exclusive access to some Windows files on the disk.  These are accessible only by re-starting Windows. "   I was in charge of restarting my computer and repeat the test.  I did this, but got the same message several times in a row.

  I use the MS Update center regularly, my Windows XP software has been certified 3 times as being Windows genuine, and I update MS Security Essentials at least every 2 days.  I DON'T KNOW WHAT ELSE TO TRY!  As a general rule, ALL my other Windows functions work correctly & completely of my home screen.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Please contact me at * address email is removed from the privacy * with specific instructions.  I'll try the center of update every day, where you will find all items that can be downloaded to fix this thank you for your continued support.  Joy Knobloch

  UPDATE WE CHECK DISK: 2 responses of PML & TWELCH were marked as possible answers.  After you schedule a check disk and shut down your computer, you must WAIT an hour or two before starting.  There is perhaps a long line of users waiting to get their audited records!  I finally managed to get the disk to run check (I also checked the box that says automatically correct errors).  BUT I NEVER GOT A CONFIRMATION MESSAGE THAT DIRECTLY STATED THAT ANY "BAD SECTORS" HAD BEEN RE-COVERED.

  LAST QUESTION: Can we assume that if the disk check ran completely and automatically corrected "problems", that the "DEFECTIVE SECTORS" have been found?

  Thanks to everyone who participated in this forum.  E-mail address is removed from the privacy *.

  It is not clear what you were / are doing.  Try this:

  Start > run > chkdsk /f > OK

  A box appears with the following message:

  The type of the file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by
  process.  You want to schedule this volume t
  check the next time the system restarts? (Y/N)

  Type Y and press ENTER.  Then, restart the computer.

  If, during the process that follows, you still receive the message "FAILED: attempt recovery of bad sectors (disk hard C)" or something similar, go to the website of the manufacturer of your drive hard drive and download the appropriate for your hard drive diagnostic tool.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Unless you allowed to access remotely in accordance with a phone call to the support of MicrosoftTHAT YOU HAVE MOMENTUM, you must disable the remote access and Remote Desktop (right click on post work, select Properties, click on the 'Remote' tab).  In fact, you must disable these features now and only reactivate if still initiate you a phone call to technical support Microsoft and will need to enable them.

• The utility cartridge replacement

  Hey guys,.

  The utility cartridge inherited agent were replaced again? Can someone provide a link?

  WebMonitor specifically and AppMonitor.

  Thank you!

  -Daniel

  The new WebMonitor 5.6.10 came out with the Foglight 5.6.10 battery. Two notes of interest: (1), we accidentally used the same name as the legacy OS (WebMonitor, reasonably enough) basket. This upsets the FMS, if both are installed together. So, do not try it. :) We'll be fixing that by changing the new his name in the next Rev (2) the new agent currently cannot monitor resources https through a proxy, that will be fixed in a future release.

  An AppMonitor as feature is in the plans for the next major release of Infrastructure, alongside new NetMonitor and LogMonitor (replaces LogFilter). At the moment I think that all we need to add to the HostAgents for a characteristic AppMonitor is the ability to specify the process interesting in a secondary list of ASP and a rule as the rule of the availability of the process of the BONE wagon inherited, by http://edocs.quest.com/foglight/5610/doc/Cartridge/OSCartridge-ref/Rules.04.php#430311. If you would wait or need something else an AppMonitor replacement, it would be a great time to let me know. :)

  Post edited by: Stuart Hodgins