Tecra R840 - energy SSD after closing

Similar Questions

• Tecra R840 mSata SSD installation in module 3G position

  Hello
  I have a Tecra R840-110 model, there is also a 3 G module inside, I would install the mSata SSD pcie slot.
  Is possible to use the mSata SSD instead of module 3 G pcie slot?

  Thank you very much for your help!

  I think that something like this is not possible. Card mother ports are not a kind of flexible ports.
  In the past, that Toshiba gave the second HARD drive, upgrade instead of the optical drive using special adapter.

• Tecra R840 not stopped after waking from sleep (USB, BT does not work)

  Hello

  I have a problem with my R840 running win7pro + SSD.

  After he wakes up from his sleep:

  -No USB activity (but there is power in ports because I can see the leds on the external HARD drive or mouse)
  -my Bluetooth mouse no longer works
  -my internet connection will work after 1 or 2 minutes of waiting
  - and... the laptop will not be stopped, unless I press the physical button on / off for 5 seconds or so!

  In Device Manager, everything looks ok! In all power management devices/REPEATER MULTIPORT USB etc is on do not turn off the devices to save energy!

  Already own started the laptop several times and the problem remains.

  Everything is fine if the laptop can't SLEEP!
  But I put it in sleep mode and I wake up it I have all these problems!

  Any suggestions?

  Best regards
  Paulo

  I think it of very difficult to find a solution to this problem because the software (OS) and hardware (SSD) has been changed.

  So the question could appear due to new software and change of material missing or bad drivers.
  To me, it seems that the issue requires further investigation.

  Did you notice the same problems using the preinstalled Toshiba system and the original HARD drive?
  I think that this should be checked first.

  By the way: this is the BIOS updated?

• USB does not wake up after Tecra R840 goes to sleep

  Hello

  I have a Toshiba Tecra R840 on windows 7 sp1. I use a USB mouse, but whenever I put my laptop to sleep I have to go out and re put the dongle insert it again.

  I've changed the following power options:
  Under devices, USB, USB Root Hub power management "allow the computer to tun turn off this device to save power" is not checked

  It goes the same for generic Hub
  Under control panel, power options, USB, USB selective parameter settings is disabled.

  Does anyone have any suggestions?
  Thank you
  Tony

  Have hmmm you tried to remove/delete the USB hubs and controllers from Device Manager and install it again?
  Usually after restart again the system should automatically find the drivers and needs to be reinstalled all USB controllers once more

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• Upgrade SSD for a Tecra R840-16J

  Hello world

  This is my first post here!
  I am Portuguese and I bought a R840-16J two months ago. I chose this model because it had all the specs I wanted (I run Toshiba laptops since 1997... and my first still works!) except one: he had not an SSD. Given that I could not custom make my laptop that I bought it with a 500 GB HDD at 7200 RPM,.
  The upgrade only I could do (and I did) was to install an extra 4 GB RAM module.

  I would like to install an SSD now (with the same capacity,...).

  My questions:

  1. don't recommend me a special brand/model?
  2 - What are the steps that I need to have a correct installation?
  3. I installed a lot of sw that I need (office, PS and many astronomy specific sw I use). Do I have to re - install all these or is it a solution to 'clone' my HARD drive SSD?

  Any advice will be greatly appreciated :-).

  Kind regards
  Paulo

  > 1-do you recommend me a special brand/model?

  I would not recommend a specific model or manufacturer, I think that it s always a question of value for money. I recommend you get some reading and assessment tests some SSD drive test on tech Web sites.
  You can choose the best SSD drive for you I mean it didn't need to be the best and expensive

  > 2 - what steps I have to do a correct installation?

  It is the same procedure as the HARD drive upgrade.
  Check this nice HowTo from Toshiba:
  Tecra R840 & Satellite R840 HARD drive replacement procedure
  http://APS2.toshiba-tro.de/KB0/CRU19037K0000R01.htm

  > 3 - I installed a lot of sw that I need (office, PS and many astronomy specific sw I use). Do I have to re - install all these or is it a solution to 'clone' my HARD drive SSD?

  You can install everything again on new SSD drive or you will create an image:
  You can use an option included in Windows 7:
  Click Start at the start and then select back up your files.
  Then click on create a system image hyperlink.
  Now you can choose where you want to save the image. You can choose an external HARD disk, burn it on several DVD s, or store it on a network location.
  When you want to restore the image, you will be able to use the System Recovery Options to recover the system. For a recovery of the system option, you must start the Win 7 F8 press should choose fix my computer. You will find in this window option called: system image recovery

• Tecra R840-116 - Type of SSD

  Hello

  There is a 256 GB SSD in laptop Tecra R840-116. I would like to know the manufacturer of this SSD. Anyone know which Type of SSD Toshiba uses in its Tecra laptops?

  Thank you
  Flo

  Hi spf317,

  Tecra R840-116 uses a SSD Toshiba drive with 2.5 9.5 mm in height and form factor.

  Do you need information more?

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Tecra R840-16J - Win 7 installation - how?

  Hello

  I want to make a new one. Clean instal win7 Pro in my Tecra R840-16J (a BSOD appeared only 6 months after I bought it!). I'll install an SSD too!

  Could someone tell me how to do? (I mean, which drives should I have to install hel?) I downloaded al 48 discs and Aps for my model when using win7 64 bit.

  Kind regards
  Paulo

  Hello

  Install the drivers in the following order:

  Windows 7 64 bit

  Driver USB-Serial V1.3.0
  PlayReady PC Runtime 1.3
  Infineon TPM professional package 3.60.2071.00
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface 7.00.02.1164
  Intel AMT 7.00.02.1164 software
  8.801.2.1 - 101225 a-111146C-Toshiba AMD display driver
  Intelligent management of the TOSHIBA v1.0.2.0M screen
  Driver Intel Rapid Storage Technology 10.1.0.1008
  Realtek Audio Driver 6.0.1.6271
  Intel LAN driver 15,7
  USB3.0 Driver 2.0.32.0rior
  ALPS Pointing Device Driver v7.x6.303.106_A
  Synaptics Touch Pad Driver 15.2.4.4
  Driver O2Micro 1.1.4.207G smart card reader
  TOSHIBA value added package 1.4.1
  Ricoh 2.11.17.02 card reader
  Intel Wireless LAN Driver 14.0.0.113.0.s64
  Intel Proset 14.0.1.0.0.s64 & 13. 3.0.0.1.s64
  ConfigFree 8.0.35
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 13
  TOSHIBA Fingerprint Utility V1.0.2.36
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Utility of rotating 180 degrees TOSHIBA v1.4.0.0
  TOSHIBA eco Utility 1.2.21.64
  TOSHIBA HDD/SSD Alert 3.1.64.6
  TOSHIBA HDD Protection 2.2.0.12
  TOSHIBA Service Station 2.1.45
  TOSHIBA PC Health Monitor 1.7.3.64
  TOSHIBA Sleep utility 1.4.1.7F
  TOSHIBA V4.00.4.12 VCR - HAS
  Intel Wireless Display 2.0.27
  TOSHIBA v2.0.4 synchronization utility
  TOSHIBA Media Controller 1.0.85.4
  TOSHIBA Media Controller plugin 1.0.5.13
  PatchFiles

• Tecra R840 - which partitions can I delete?

  Hello

  I installed a Plextor M5P 512 GB ssd in my Tecra R840-16J! I'm very happy with it :-)
  Restore laptop to factory state using the recovery DVDs I created before! Now, I have 2 copies and a 16 GB USBFlash with an extra copy! So I can restore to factory State whenever I want!

  But I would like to delete the allocated partitions to this!
  In my SSD, I have 3 partitions made after recovery (please to image): http://imageshack.us/a/img827/4873/34012663.jpg

  Who then can I remove?

  Thank you very much
  Paulo

  First (1.4 GB) partition is created automatically by Windows 7 and there are some files used by Win 7 in case you need fix the system or set system time back at the beginning.
  The second partition C is common system partition containing the Win 7 OS.
  The last partition is the recovery partition that contains the files to recover.
  Recovery files are required to create a recovery disk. In addition the recovery partition allows to recover the laptop without the use of the recovery disk (HARD disk recovery option)

  I do not recommend to remove or change any partition UNTIL you not create the recovery disk.
  Create the recovery disk and then you could change the partitions of HARD drive theoretically you can delete the last partition of HARD drive recovery if you have already created the recovery disc.

• TECRA R840-16V to win7 64-bit to win10 level

  I tried to upgrade my Tecra R840-16V (number PT429E-05M00KGE) form windows 7 64 bit pro to windows 10 pro through windows update. During the upgrade procedure is complete all seemed ok, but after a while, the system froze (even the mouse). I did a reboot in my system via the power button / stop, the system has worked well for about an hour and froze again. I did a reboot via the Start button / stop, one more time and I had the same problem after all. I did a restore of the system in windows 7 and everything works fine without any gel at all.
  Is this a known issue? Is there a solution or suggestion to update my system without problems on windows 10 pro?

  Thank you

  Posted by axiotidis
  

  I tried to upgrade my Tecra R840-16V (number PT429E-05M00KGE) form windows 7 64 bit pro to windows 10 pro through windows update. During the upgrade procedure is complete all seemed ok, but after a while, the system froze (even the mouse). I did a reboot in my system via the power button / stop, the system has worked well for about an hour and froze again. I did a reboot via the Start button / stop, one more time and I had the same problem after all. I did a restore of the system in windows 7 and everything works fine without any gel at all.
  Is this a known issue? Is there a solution or suggestion to update my system without problems on windows 10 pro?

  Thank you

  Hello

  Never solved this problem, I have the same problem with my Tecra R840. I have windows 10 initial installation when it was first released, however had the freezing issue (System fan would also begin running at 100%, that is very strong but whole machine was locked and would require a hard reset). After a few weeks of this question, that I started Windows 7 and which would be fine.

  However, just tonight I thought I would try the anniversary 10 Windows Update to see if that had solved the problem, unfortunately the same problem persists. After you have installed update Windows 10 anniversary (updated to Windows 7), the laptop freezes still. There a simple 3 minutes after connecting the fan turns 100%, and everything froze upwards.

  Thoughts/ideas or help here would be appreciated?

  See you soon

• Tecra R840 - Ethernet and driver sound Dynadock question

  Hey,.

  Tecra R840, model PT429A-007004, does not work with the Toshiba dyna docking station.

  Specifically, the Ethernet and the audio driver for the dock dyna is not installed after running or installing the driver on the cd of the dock dyna or the latest driver on the site.

  Does anyone know a fix for this?

  Note: nothing in Device Manager to say that these pilots to dock a missing, only when you install the driver mentioned the wizard that Ethernet and audio drivers might not be installed.

  He also mentions that the dynadock has a problem with the graphics card edge, but we have not had problems with graphics, for example screens.

  > where to install the driver only mention Assistant that Ethernet and audio drivers might not be installed.

  _Regarding the driver LAN and Audio missing. _
  This theme has been discussed already in this thread
  http://forums.computers.Toshiba-euro...ThreadId=70771

  _The possible solution: _
  Navigate to the folder * C:\Program Files\DisplayLink Core Software *
  And here you should find the drivers for the network and its

• Tecra R840-109 - alert HDD - unable to get disk information

  I turned on my Toshiba Tecra R840-109 and everything looks that the factory settings have been restored, but I still have my files on the hard disk in the users folder (where the system has also built a temporary user I'm connected now, I guess).

  At the opening, the computer asked me to do the things you do when you get a new computer (for example accept the license, install browsers, register fingerprints, if applicable etc.). In addition, it showed an error, alert HDD/SDD saying "Could not get the information from the disk, cannot use the alert function".

  Is there a way to solve this problem, that is, to apply the previous (original) user?

  An obvious solution would probably be to restore the system, but I don't have a backup set to the top (which I will fix as soon as this problem will be solved). Tried to reboot, nothing has changed.

  Information on the mobile phone: http://www.toshiba.co.il/en/disconti...ecra-r840-109/

  Any help is appreciated!

  Hello

  To be honest situation described sounds pretty confusing and not logical for me.
  If you do not have recovery (DVD or USB) media create using preinstalled Toshiba recovery media creator tool.
  After this use this bootable media and reinstalling the recovery image so you will have 'presets' again. After the installation of clean operating system, it is not possible to have the old data stored on the HARD drive, not on the C partition.
  The fact is that before the installation of recovery begins any HARD drive will be deleted and formatted.

  Sorry if I got you. If you have any concrete and clear questions do not hesitate to ask.

• Re: Tecra R840-199 - cannot get its ethernet card to pick up the IP

  Hello
  I have Tecra R840-199, Running Win 7 64 bit.
  I installed intel drivers for the network card. (Intgel 82579LM)
  the card is recognized on the system,

  but it will not pick up an IP address. (the network cable and port are working)
  Any suggestions on how to solve this problem.
  Ive updated the bios, and software service does not pick up all updated

  Hello

  According to the specifications of the laptop this laptop was offered with preinstalled professional Win7 64 bit. Original recovery image contains all the necessary drivers and after first boot all hardware components are installed correctly.

  Usually the LAN connection cable should be enough and your laptop should have full access to the network.

  Until we start the discussion, I have some questions for you:
  You use this original OS version that you got with your laptop?
  You have installed driver from the Toshiba download page?
  You may have problems at home or in your business?

• Tecra R840 - upgrade to i7 2720QM

  I'm going to by a Tecra R840 with i7 2620M processor. Is it possible to switch to an as the i7-2720QM quad-core processor?

  Hello

  Update CPU is delicate. No one can tell if your laptop would be stable after this upgrade.
  There may be a compatibility problem between the processor and BIOS or higher heat dissipation may lead to a higher temperature

  But in General, you can use the CPU that is supported by the chipset of the motherboard.
  If the chipset would support the new processor so you chances to get this quick.

  It seems that both processors support the same socket, so it shouldn't be a problem to fit the CPU on the mobo
  http://Ark.Intel.com/Products/52231/Intel-Core-i7-2620M-Processor-(4m-cache-2_70-GHz)
  http://Ark.Intel.com/Products/50067/Intel-Core-i7-2720QM-Processor-(6m-cache-2_20-GHz)

  But why do you need new CPU?
  The Intel Core i7 2620 M is really a good processor and the portable disasembling means you lose the warranty!