Tecra S3: Omnipass 3.51.10 malfunction

Similar Questions

• Boot Tecra 8100 - would it be CPU malfunction?

  A few months ago, I had a problem with my Tecra 8100 - does not start, everything seems OK but nothing on the screen (no post). I bought another motherboard and replace the old 1 MB, but the problem remains the same: everything seems normal, led lights turn just as it should, cooler works well but nothing on the screen.

  I tried to connect the external display, but there is nothing on it, too. I have two memory modules and I tried all combinations with them (they are OK).

  Is it possible that the problem is something with CPU - I don't know what else could be the problem?

  Please, can someone give me help!

  I assume you mean on this subject:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22595

  Well, as mentioned in the first thread, it's not easy to say what could be wrong.
  Of course, it is possible that the CPU malfunctions and, therefore, you cannot use your laptop's!

  But these are only suggestions, and no one will be able to provide an exact error diagnostic.

• Tecra A8 BSOD - hardware malfunction

  Hello world.

  I have Tecra A8 and there is problem happened to me all the time.

  Blue screen with this message:

  Malfunction of the equipment; the system is shut down. Call your provider of support material

  I changed the hard drive & RAM, but it doesn t work

  One had this before

  It does not seem good buddy.

  It looks like a serious hardware problem. Maybe it s related to the motherboard.

  I think you should do what is written in the message: call your hardware support of the seller.

  So I recommend you to contact the local Toshiba authorized service provider.

  Good luck

• Tecra T9000: Hardware malfunction start-up

  NMI: CHANNEL CHECK / IOCHK message

  When starting my laptop, a TECRA T9000 I had problems with the message... * Hardware malfunction * NMI: CHANNEL CHECK/IOCHK this system stopped *.

  I had the hard drive changed and again I got this message once more, it starts later because there for me to write this, but if you can help me identify the problem please!

  Hello

  Windows can display only basic error messages in case of malfunctioning of the equipment, troubleshooting can be difficult. Most Centre of problems of equipment around the motherboard, the RAM on a motherboard or on an adapter, or memory cache on a motherboard or adapter.
  Well, it would be very interesting to know that you have changed material. In addition it is possible that you have improved the unit with the device is not compatible.

  Good bye

• Re: Tecra Z40, Win 8.1 - malfunction of the fingerprint reader

  DESCRIPTION OF THE PROBLEM:

  My Tecra Z40 arrived with Win 8.1.
  From the beginning I couldn't use the fingerprint utility.
  When you access the utility won't happen for a while and then the error: "Could not connect to the fingerprint reader" has finally popped up.

  I could also not use the actual construction of fingerprints 8.1 Win (error: this device has biometric devices is not suitable). (PS mind that this built in function is now integrated into the subway and no device biometric parameters are not now present in the control panel to 8.1 win!)

  The problem has persisted despite the last fingerprint utility (which comes with the drivers) have been installed to win 8.1. 64-bit directly from the website of TOSHIBA and despite that a biometric device was still present in the Task Manager ("this device is working properly").

  SOLUTION:

  After literally weeks of research (including getting help from the shop and service Toshiba), I could finally solve the problem.

  I uninstalled the driver and the reader of fingerprints from the Device Manager (then only fingerprint reader drivers really disappear).
  Then I cleaned the registry (I used CC cleaner software) (or install new wasn't a reason any).

  Finally, I installed a Fingerprint Utility equivalent and the driver for Tecra Z50 (fp - sw - 20140605164020.zip) (which I expect to be using the exact same sensor)... and since then everything works fine.

  I can now access the utility of fingerprinting and fingerprint log on in Windows.

  SUGGESTION OF CORRECTIVE MEASURES:

  It seems the driver on Toshiba support website (I think for me it was the Poles) for my exact machine (made by TOSHIBA - detector.exe) is incorrect.
  To make matters worse the driver does not communicate useful information on his miss - fit in the Task Manager! If I had to recalculate, in money, as long as I have and a whole lot of support persons had spent on it, there really meaning to improve this list of drivers!

  (PS: one of the files in the same directory online regpatch has a virus (VIRUS A Yes) it has been recognized by Antivir!) -Toshiba, you can communicate with someone responsible for the Polish support site!)

  OUTSTANDING ISSUES:

  No fingerprints, login is possible in Mozilla or Internet Explorer despite the appropriate plugins have been installed as well as the utility of fingerprints, where the web password option has been activated. (no suggestion seems to appear to reach the service fingerprints for the sites that require passwords, maybe that your service gets blocked by popup blocking browser protection?).

  I'm really looking forward to this feature.
  Make sure that the plugins work correctly with the latest browsers.

  Greetings

  Hey thanks for this interesting thread and a detailed description.

• Tecra 9000 - hardware malfunction with battery

  Hello

  If I only work with my battery I get the message:
  Hardware malfunction
  Call your provider of support material
  NMI: Channel Check/IOCHK
  Support has ceased

  Last week, I change the battery but the problem is still on.

  Hello

  According to this Microsoft article http://support.microsoft.com/kb/222973/en-us, there is a hardware problem. In my opinion, you will not be able to record only. Contact the service partner in your country and let check the device. If this continues with the new battery too, I presume that there is some problem with electronic power to the motherboard.

  This message occurs only if the mobile PC is running on battery power, or in other cases too?

• Tecra M9 - PCI Express Error at startup

  Hello everyone...

  I have a Toshiba Tecra M9 (PTM91E-04R03TEN)

  http://www.Toshiba.IE/innovation/JSP/supportMyProduct.do?service=IE#TAB0;

  Setting in motion,-wristwatch splach Toshiba and then "PCI Express error." screen on a black screen
  I can't get beyond this black screen
  and I can't get into the BIOS?

  Once that he managed to start completely, let him turn for a while I record information from the HARD drive. but then, the problem started again.

  In my view, that it is a problem with the nvidia GPU (in cycle Fatigue on the BGA) card
  I have the stripted computer laptop down... and bought ArctiClean thermal Pad, & Arctic Silver for "repair".

  Should I have someone analyze the material and find the troublemaker?... OR... should I just of reflow of the GPU.

  I'm technical interest... but not a PC / laptop technician: (..)
  any instructions on how to proceed would be received with gratitude...
  Can I just "bung it in the oven" and see how it goes? :) :) .

  Kind regards
  Peter

  Hello

  I found and read your other post regarding this problem and in my opinion the PCI Express error is related to a PCI device (i.e miniPCI module as WLan / Bluetooth, etc.) connected to the motherboard.

  Of course I can't say for certain that this question isn't related to a GPU malfunction.
  Usually, these details can be provided only by a technician who checked the laptop's hardware.

  Usually I put t recommend to disassemble the laptop. It s very difficult to perform this procedure and of course there is always a risk of damage part do such procedure without any instructions.

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• Tecra Z40 - A - win 7 blue screen of death (BSoD)

  I have 3 times the BSoD on TECRA Z40 - A experience running windows 7 64-bit English last month!

  No new hardware has been installed, only the Toshiba and Windows updates carried out official.

  I have attached two screenshots from the dump files, files that have probably caused the crash...

  BSOD appears due to serious system problems or malfunction of the equipment.

  I think first of all you should get the phone to the factory settings.
  If this does not help, the parties must be checked.

  I think RAM memory modules.
  It is very important and must be checked in the first place.

• Tecra Z50 - A - 11 c: without capital letters when shift caps lock is enabled

  Hello

  I have a laptop Toshiba Tecra Z50 - A - 11 c with 3.70 BIOS...

  I noticed a strange problem with my laptop. Occasionally, when the CAPS LOCK is turned on, I can not write in capital letters when it is off, I can write in capital letters. I couldn't find the thing to replicate.

  Is there someone with a similar problem?
  What could be the problem?

  Thank you.

  The keyboard should work as follows:

  SHIFT CAPS LOCK is enabled-> uppercase
  SHIFT CAPS LOCK is on and down SHIFT-> small initial letters
  SHIFT key-> uppercase

  If this isn't the case, test the external USB keyboard.
  The use of the external USB keyboard can be useful to find out if the internal keyboard is malfunctioning.

• CD/DVD Tecra A2 problem

  Was a problem with my carpet * a reader of DVD-RAM UJ 820 S on the Toshiba Tecra A2.

  Was working fine until I tried to copy songs from a CD on the computer, on which he could not complete the operation and seemed at hand making a sort of buzz.

  I cancelled the process and released the CD but although CD I put it it doesn't recognize it and if I go to D: / (CD player) he says the disc has 0 bytes used space and free space of 0 bytes.

  Windows offers everything goes well and I tried to play with the drivers, but of course, as I have the actual driver on a Toshiba CD I can't do anything with that!

  Kudos to anyone who can give me advice,

  Mark

  Hello
  seems to be that your DVD-Ram has a malfunction.

  Just to ybout sure, try to start from a CD or DVD in Dos Mode. If this also fails, contact a Toshiba Service Center for control of your laptop.

  Good bye

• Tecra M10 - does not start only beeps

  My Tecra won't start. It sounds right. I checked the RAM and battery. I removed the keyboard, but without success.

  What is going on?

  Concerning

  Hello!

  Normally beep code at startup means that it s something wrong with the hardware (hardware malfunction).

  To identify what is the cause, you can search with Google. There are a few websites that shows what the beep code (depending on the BIOS you have).

  It could be the RAM, CPU, graphics card or something on the motherboard.

  But if your laptop is under warranty, you can contact an ASP. The repair should be free. ;)

  Good bye

• Tecra R940 - fingerprint reader does not

  Hey,.

  A few days ago I was on my Tecra R940 and I got the messages re, a USB device unplugged series. I do not think it a lot at the time, but since then my fingerprint reader has stopped working.

  I can not connect via fingerprints, and when I run the utility of fingerprints, he says: "unable to connect to the probe.

  I ran the test of Toshiba PC diagnostic tool and it passed everything except the Modem test (I jumped, do not have a telephone line).

  Any ideas on how to diagnose this?

  Any help is greatly appreciated!

  > I can not connect via fingerprint, and when I run the utility of fingerprints, he says: "Failed to connect to the sensor.

  If the fingerprint sensor is available, it must be in the Device Manager.
  I would recommend that you go to Device Manager and check if the fingerprint sensor is listed there.

  Note: in some cases the option of fingerprints is available in BIOS and fingerprints can be enabled or disabled it. That's why I also recommend to check this option.

  Where the fingerprint sensor appears not in Device Manager and in BIOS of fingerprints is activated, I guess that hardware malfunctions and this can be solved by the replacement.

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• Tecra 8100 - no sound except in mic!

  I have a Tecra 8100 Windows XP.

  I can't get sound on the speakers or the headphones emitted by the computer, such as beeps, CD, etc. But if I have to reactivate the microphone, I can hear through the headset, ensure that the microphone picks up (there are a few comments without microphones, proving that the speakers work physically). All volume controls are the maximum and reactivated. All devices are enabled and correctly selected in sound control panels.

  Any help would be welcome! Is the sound card, or am I missing a driver? Could not find anything else on the web with similar symptoms. Thanks in advance.

  Here is the summary of the Everest report:

  Value of the field
  Computer
  Type of computer Advanced Configuration and Power Interface (ACPI) PC (Mobile)
  Microsoft Windows XP Professional operating system
  Operating system Service Pack [TRIAL VERSION]
  Internet Explorer 6.0.2600.0000 (IE 6.0 - Windows XP)
  DirectX 4.08.01.0810 (DirectX 8.1)
  Computer name TECRA-8100 (Tecra 8100)
  User name of the user General information
  Connection domain [TRIAL VERSION]
  Date / time 2009-07-15 / 14:18

  Motherboard
  Type of processor Mobile Intel Pentium III, 500 MHz (5 x 100)
  Name of TOSHIBA Portable PC motherboard
  Motherboard Chipset Intel 82440BX/ZX
  Memory system [TRIAL VERSION]
  Type of BIOS Toshiba (12/30/99)
  Communication communication Port (COM1) port
  Communication Port (LPT1) ECP Printer Port

  Display
  Video card S3 Graphics Inc., SavageMX (8 MB)
  Video card S3 Graphics Inc., SavageMX (8 MB)
  S3 Savage/MX (86 270) 3D accelerator
  Generic TV monitor
  Inner cover of Toshiba monitor 1024 x 768

  Multimedia
  Yamaha Native DS1 Audio CODEC audio adapter

  Storage
  Controller IDE Intel(r) 82371AB/EB PCI Bus Master IDE Controller
  Floppy Drive floppy disk drive
  Hard drive IBM-DARA-212000 (11 GB, 4200 RPM, Ultra-ATA/66)
  Optical drive TOSHIBA DVD - ROM SD-C2402 (8 x / 24 x DVD-ROM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) [TRIAL VERSION]
  Total size [TRIAL VERSION]

  Entry
  Keyboard Standard 101/102-key or Microsoft Natural PS/2 keyboard
  Mouse HID-compliant mouse
  Mouse PS/2 Compatible Mouse

  Network
  IP main [TRIAL VERSION]
  00-10-A4-E1-F9-30 main MAC address
  Network card Xircom CardBus Ethernet II 10/100
  Modem TOSHIBA Internal V.90 Modem

  Devices
  Epson ActionLaser 1100 printer
  HP DeskJet 540 printer
  Infrared controller Infrared Port
  USB1 controller Intel 82371AB/EB PIIX4 - USB host controller
  USB device USB Human Interface Device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version Version 2.30
  TOSHIBA DMI system manufacturer
  DMI system product laptop
  DMI system Version Version 1.0
  DMI serial number of the system [TRIAL VERSION]
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product laptop
  DMI Motherboard Version Version A0
  DMI serial number motherboard [TRIAL VERSION]
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version Version 1.0
  DMI serial number of chassis [TRIAL VERSION]
  DMI chassis [TRIAL VERSION] inventory number
  DMI chassis Type Notebook
  Total memory / free DMI casings 2 / 0

  Hello

  A good questions and I never heard of this topic which s...

  I think the fist, you should start to update the audio driver of your laptop. Therefore, you can see the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing the latest version, you must remove the old version first and reboot the laptop.

  Maybe a reinstall of Windows with the Toshiba recovery disc could also be useful and in the worst case, it s only a hardware malfunction and it must swap the motherboard. :(

  Welcome them