Telephone number of record is no longer active, which is the new number of Fireworks MX

Similar Questions

• Maximum number of activations reached after the new installation of Lightroom

  After migrating to a new MacBook, I installed OS x fresh on the old MacBook. Because I also tried to get rid of Manager CC I uninstalled Lightroom and installed again on the new MacBook.

  Lightroom now, tells me that the maximum number of activations has been reached. Altogether, I have indeed installation, one on my MacMini and the other on my MacBook.

  Who can reset the activations?

  Normally, you should be able to reset by opening the program and by selecting help-> Deactivate.  If this isn't the case, then you will need to wait until you can reach the Adobe Support via chat and ask them to reset the activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• VMplayer "Binary translation - long mode" error on the new ZBook 15 G2 w / i7-4810MQ

  I installed VMplayer 5.0.x and attempted to load an image of Machine virtual existing Win7Pro 64 and got: "binary translation is incompatible with the long mode on this platform.  Long mode off. Without the support of the long mode, the virtual machine will not be able to run 64-bit code. "For more information see http://vmware.com/info?id=152 .

  Passed 64-bit compatibility check (referenced in the link): ' this machine is capable of runnning a 64 bit comments under this product VMware operating system. "

  I tried to reinstall the operating system as a new virtual machine and got the same error message.

  VMware docs see firmware/BIOS, does not support the VT CPU features:

  "Intel processors require an EM64T and VT support in the chip and in the BIOS.

  Note: If VT is enabled on an ESX host, the vmx flag is located in/proc/cpuinfo. {LINUX OS}

  Intel EM64T processors do not have segmentation support in long mode. If the Intel EM64T CPU is VT-capable, it comes with support for hardware virtualization (Intel Virtualization Technology). This support for hardware virtualization allows VMware circumvent the lack of segmentation, which allows to run 64-bit on taking VT processors operating systems support Intel EM64T.

  Notes:

  • The firmware/BIOS support is required to enable Intel virtualization technology. Some systems (especially laptops) do not have the necessary firmware/BIOS support to enable Intel virtualization technology and cannot run 64-bit operating systems. »

  The ZBook 15 G2 w / i7-4810MQ CPU supports 64-bit virtualization? Ideas or experience?

  I feel a little embarrassed... I had been in the BIOS Setup but have not seen the VM options under "Advanced". I turned on the features I needed.

• Thunderbird beta (v.34.0): Inbox - unified records is no longer "refreshes" to show my new messages.

  My new messages appear is no longer in the unified 'box' until I open one account and return to the unified "in box" where they are all 'appeared '. This issue has been present since the current beta version running.

  Try to start in safe mode "with Add-ons disabled" in the Help menu.

  A lot of changes in the current UI, could trigger up to an author add-on.

• Why does take so long to connect to the new update?

  I tried to fix this overnight, it takes so long to log, and this was not the case before I updated my Mac Book Air. I tried to reinstall but it doesn't work and I've had this problem since the upgrade.

  It is a space to discuss the Windows version of Apple software update. I asked your thread to be moved.

  TT2

• How long it takes for the new DPS sheets to be available on devices?

  I have create a folio with DPS proffesional multi app. I published my second folio, and although in my DPS builter, published ad is marked it does not appear on devices. Anyone know how long it takes until a folio published is available on devices? Thank you!

  Folio name in the Folio producer and Folio Builder Panel, but it does not appear in the Viewer. This cannot be the issue.

  The name of the Publication appears in the Library Viewer and in the navigation bar of the Viewer. However, if the name of the Publication is used to all folios in an application, the name of the Publication is not displayed in the design library.

  Have you tried to update folio to folio producer? If not, you can try.

• Some of my programs no longer work after installing the new update from microsoft... can't locate the files server etc..

  Programs do not work and then MSO1033 and Outlook.NK2Outlook appeared on my desk and I wonder if I should find a way to put them where they belong and everything will work well...

  Hello Avalia,

  Please provide us with some information about the programs that do not work.

  
  With information available to us so far, you can run the restore to the date where the programs were working well.

  To restore the operating system to an earlier date, follow these steps:

  1. click on the system restore starts, type in the Search box, and then click System Restore in the programs list.

  2. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  3. in the System Restore dialog box, click choose a different restore point , and then click on Next.

  4. in the list of restore points, click a restore point created before you started having the problem, and then click on Next.

  5. click on end.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore if you want more information
   http://support.Microsoft.com/kb/936212/

   
  
  Please let us know if it helps.

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• didn't recognize RAW files no previous recorded camera Canon 50 d files or the new canon 7 d mk2 - any ideas how to fix? Martin

  Photoshop does not have the previous canon 50 d raw files and new raw files from canon 7 d mk2 to be recognized, so does not open. The two cameras are in the list of photoshop, any ideas how to fix it please? Martin

  The two cameras are in the list of photoshop

  The list shows what version of Photoshop is required for each camera model. Everything simply because it's on the list, does not mean that is supported by your version of Photoshop.

  Devices supported by Adobe Camera Raw

  Camera Raw plugin and Adobe application compatibility

  Canon 50 d requires that Camera Raw 5.1 = Photoshop CS4 or later version.

  7 D Mark II requires Adobe Camera Raw 8.7 = Photoshop CS6 or later version.

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• My MSN account was blocked and the other recorded with her email address is no longer active so I can't get a verification code.

  My msn account was blocked and the other recorded with her email address is no longer active so I can't get a verification code. What should I do?

  Hi Harryjenkins,

  I suggest you to contact MSN support for assistance on this issue:

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  You can also visit the site mentioned below and check if it helps:

  http://windowslivehelp.com/solution.aspx?SolutionID=283b059b-d26d-41f9-ae3d-03a07afcb4ad

   

  I hope this helps.

• How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. In the meantime, I'm up to 13 days until it stops working due to not bei

  How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. Meanwhile, I'm 13 days until it stops working due to not be enabled. Help?  I really need to continue to use this product for my home business. It works very well not activated but the threat is that it will stop working in 13 days more if I don't get activated, and none of the activation methods that they list seem to work.

  You can download CS2 if you have a valid license for CS or CS2.

  And you have to follow the instructions and use the download again AND the new serial number.

• HP Support Assistant - telephone number incorrect for the Germany

  Let's not the phone number indicated in HP Support Assistant for the Germany. Under the button 'Contact support' location Germany selected, 'call HP"indicates phone number 01805 65 21 80. This phone number no longer in service.

  The right phone numbers are on http://www8.hp.com/de/de/contact-hp/phone-assist.html and in my case, it would be + 49 69 2999 3434 for support for portable computers.

  I used the Feedback button in the HP Support Assistant to report the problem on the wrong telephone number.

  HP Support Assistant version: 7.0.39.15

  Configuration file version: 7.0.2395.1100

  Mike

  The about button / check for the latest version on HP Support Assistant version: 7.0.39.15 (running on the laptop of HP ENVY 15 TS) came back with the result that the latest version is already installed. I noticed that on the page of the driver for my laptop, this 7.3.35.20 Version sp62291.exe is available. Once I had downloaded and installed this new version, support for the Germany phone numbers appear correctly.
  
  Mike

• Is there a telephone number where you can talk to a real person?

  I have called the numbers in activation programs and still get a computer, which explains the activation failed... blah, blah, blah

  Do not select the preset options, wait until a real person answers.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• F2 key is no longer active / disable the wifi switch card

  I have laptop Dell mini. The F2 key is no longer active / disables the power switch wifi card. It is always disabled. The device is present, it seems to be a software problem. I uninstalled the drivers and them was reinstalled. I even completely reinstalled Windows 7. Nothing will get my F2 key works again.

  Happy, it's kind of better.

  Consider going to Dell support for new copies of their public services - things with names like

  Dell Wireless enable / disable

  Dell function keys

  that is, no matter what the equivalents are for your system. I just had a peek at one of the Minis because I didn't know you had and these names seem to be utilities controlling the special Dell configured keyboard keys [including F2 is a].

  If you sign in with your Service tag, it just goes to show that you updated utilities & drivers but at the top of the list, right next to a label with your serial number on will be a tab for all models of type - leaf through as you don't care if something is an updated version you need to replace a utility that does not work properly.

  Good luck

• How long can you install the CS6 pack with the same serial number?

  How long can you install the CS6 pack with the same serial number?
  I have a new computer and you want to install it again.

  I already install twice because I needed to re - install on my old.

  you are allowed to two simultaneous activations.

  If you disable (help > deactivate) a previous activation, you can keep your two simultaneous activations and essentially install/activate an unlimited number of times.

  [moved from Creative cloud download & install download, installation, commissioning]