Temperatures normal precision 690?

Similar Questions

• Dell Precision 690 memory risers

  Original title: Dell PRECISION 690 MEMORY RISERS

  Help...
  Ive a precision 690 workstation, WITH 4 GB = (2 X 2 GB) WITH MEMORY installed now and Ive mounted a 1kw power.

  I JUST GOT A PR OF MATCHING RISERS (EG) 1,2 & 3.4...

  BUT THAT IS WHERE THE PROBLEM BEGINS.

  THE DISPLAY SHOWS THE RISERS MUST BE INSTALLED IN SETS OF FOR.

  AS SOON AS I INSTALL MORE MEMORY MAKES THE FAN BACK SOUNDS LIKE HIS WILL EVEN TAKE OFF BY PUTTING IN THE GAME OF MEMORY (4 GB), I GOT IN WITHOUT THE RISER INSTALLED FANS TO ACCELERATE.
  SOMEONE POINT ME IN THE RIGHT DIRECTION BECAUSE IM CERTAINLY SOMETHING WRONG.

  The page linked below can be useful, since it covers the installation of memory with the memory riser cards:

  Dell Precision Workstation 690 user's Guide
  Installation of memory (with maps of memory riser option)
   http://support.Dell.com/support/eDOCS/systems/ws690/en/UG/memory.htm#wp1063555

  If this is not enough, so I suggest the following tips to Shenan Stanley and contact Dell technical support.

  Kind regards

• Dell Precision 690 workstation

  Hello

  I'm trying to find the instructions/manual for my Precision 690 WS.  I am trying to install a DVD player, but can't find a way to remove the cover in the front of the drive bay that you want to insert the disk in it.  If you know how, I would appreciate your help.

  Thank you

  aak740il

  Hello

  I'm trying to find the instructions/manual for my Precision 690 WS.  I am trying to install a DVD player, but can't find a way to remove the cover in the front of the drive bay that you want to insert the disk in it.  If you know how, I would appreciate your help.

  Thank you

  aak740il

  See pages 73/121 owner's manual here:

  http://downloads.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dell_precision_workstation/precision-690_user%27s%20guide_en-us.PDF

  Bev.

• (Redirected) Precision 690 starts

  I have 8-9 years old Precision 690 with dual Xeon 3160, dual nVidia Quadra 4500 graphics card, double SCASI Hitachi 150 GB, hard drives searched. Computer worked fine until he ceased to start up.

  At the start, it does not show with Bios A 06 Dell logo, as it should.

  This does not suggest that the problem is with the motherboard, boot hard drive or maybe the operating system?

  Any suggestion will be appreciate.

  With our thanks.

  Dragan Mikki

  Best of this post in the Hardware Forum general office, here:

  http://en.community.Dell.com/support-forums/desktop/f/3514.aspx
   
  Bev.

• Dell Precision 690 workstation several hard drives

  I have a Dell Precision 690 and I am trying to connect the hard drives in the right order. The documentation says they must go into the HARD drive marked locations on the motherboard, but they do not work. The only slots that work are the SATA slots. I tested five SATA drives but I can only get three to work on three SATA slots instead of four locations of HARD drive and slot extra SATA as the book said to do.

  I tried which helps the controller under the BIOS: has no significance if it is enabled or disabled. I determined that AHCI is unable to be activated, it must be ATA.

  In the end, I need to have five total drives. Four in the slots in the HARD drive and the other in the SATA slot. (Which will be for operating system 1 SATA and SAS RAID 4). I realize that the HDD_0, 1, 2, 3 locations are to use SAS/SATA but I can't take too much work.

  In addition, I don't ' know if this is important or not, but he has Windows XP Professional x 64. BIOS A05 and I know an update is A08, I did do that yet though.

  Anywhere I can find that material assistance would be much appreciated.

  -E.Avalon (help).

  Yes, there are three ports labeled SATA (0,1,2) and four ports labeled as HARD drive (0,1,2,3). The manual says to connect hard drives in HARD drive ports, then in the SATA ports. The first two SATA ports are for additional optical drives and the last port is used for a fifth hard drive.

  I got in touch with several people in technical assistance from Dell and eventually find the right driver to install.

  Because I don't have the OEM disc that came with the computer, I was doing a new installation of a Windows disc. I needed F6 (third party drivers) to activate the HARD disk ports until the installation has taken place. (And honestly I don't remember what the file was immediately.)

  The AHCI could not be activated because the discs I have are Serial ATA disks and in the BIOS, there is a choice between ATA and AHCI.

  The problem is solved and I feel like I could do a test on this computer and become a technician for her.

  -E.Avalon

• Precision 690 MY171 rev A00 mobo - hearts Xeon 5300 series

  Hello

  I know that this subject has been discussed in the past, but I am having a hard time finding an answer for my exact situation.  My Dell Precision 690 runs the rev MY171 A00 motherboard on rev A08 bios.  It currently has a single processor dual core Xeon 5150.  I want to upgrade to dual quad core Xeon 5300 series processor.  I've seen youtube videos and discussion with rev A02 MY171 boards that run the 5300 series, but nothing to confirm if the version A00 will run them.

  The rev A00 motherboard BIOS A08 MY171 will work two Xeon 5300 series quad core?

  Thanks in advance for the help!

  Today, I received my processor Xeon X 5355 to four hearts by post and installed in on my MY171 Rev00 on bios A08.  No problem during the performance of the processor.  I took out the battery from the motherboard for 2 minutes before relocation and commissioning for the first time.  BIOS immediately recognized the processor.

  I'm running window 10 and initially he saw only 2 carrots.  I went into MSCONFIG and made some changes on the STARTUP, the Advanced Options tab, you should uncheck 'Number of processors' and restart.  After that, the OS will see all 4 cores.

  I intend to run identical to the second X 5355 processor, but am waiting to get a second heat sink before a fall.

  Hope this helps others seek to upgrade the 690.  The two processors cost me a total of $20 on ebay.  Also got 16 GB RAM DDR2 PC5300 (8X2Go) for this computer for $10.  Computer will work great for $30 worth of improvements.  I still feel like they need SSD to run faster.

• A power of 1000w Dell Precision 690 United States will work in the British system

  I want to order a replacement power and found a Dell Precision 690 1000W ND285 power in the United States, I know that this system works this power but wanted to know if I ordered it from the United States to be shipped to the United Kingdom (England) it will work here or is there a voltage difference that will blow/effect it?

  The reason why I ask this is that I repair my friends Precision 690 power because it starts not as it should be because it has the dreaded 1-3 and power button flashing continuously orange. I usually get it going again for him leaving on the supply cable of the day after / for a few hours, but the problem comes back finally after some closures, so not a solution.

  His system has 32 GB of RAM, a processor my171 mother board 2 Xeon QuadCore 5355, a Nvidia Quadro 4800 graphics card and 4 SATA drives and 2 DVD r/w drives all sitting in the appropriate ports.  I tested it on and all the way to no disk no ram, but even in this case the problem may occur intermittently.  I don't know that his power relatively maybe even a little somewhere? but I've looked and looked and left with the feeling that his power.

  but the only one I can find that is affordable is to the United States, the price they want to pay in Germany, I could buy a car for.

  American food will work in my UK machine?

  Thank you.

  Hugh

  (Just note that happened in (general Hardware, Audio, video) I hope this is the right category, if not my apologies.)

  hughhill

  Yes, it should

  Input 100-120 v or 200-240 v, output: 1000w Max, reference number: ND285

  Model number: N1000P-00, Ref number: NPS-1000AB a Rev: 06

  For Precision 690 microtower systems

  Connectors:

  1 x 24 - Pin ATX power connector Standard ATX Standard 1 x 20-pin power connector, power supply ATX Standard 1 x 12 pin connector, ATX Standard 1 x 8-pin power connector, 2 x PCI-Express, 4 x Mini 2 power connectors pin power connectors, adapter 1 x 6 - Pin power connector.

  Before using the power supply, check that the voltage is set at 240v. There should be a red toggle on the power switch, to set the voltage, if there is no switch, then the power supply is auto switching.

• Drive Precision 690 start-up blocking

  Dell Community,

  I have a Precision 690, which worked perfectly in an environment Windows 8.1 until my SSD OS died a few weeks ago. I had a Samsung 840 EVO on the set, installed and took the computer home for the weekend to do a clean install window 10 Pro. Surprisingly, given the age of this beast, everything went pretty well.

  My a persistent problem is at start-up, where for the post, I see the screen following with SSD listed, no problem:

  5 Dell BIOS SAS Host Bus Adapter

  MPTBIOS - 6.06.00.02 (2006.04.05)

  Copyright 200-2006 LSI Logic Corp.

  HBA listing includes:

  0 0 0 BB6Q Samsung SSD 840 ATA 114473 MB

  0 free SAS1068-IR 0,06.50.00

  Then in the next screen:

  Serial ATA AHCI BIOS, Version iSrc 1.02.25.07222007

  Copyright blah blah blah

  #00 Bus controller, device #1F, # 02:03 Ports, devices 01 function

  00-port: no display device

  Port-01: no device detected

  Port-02 CD-ROM, ATAPI DVD A DH24ABS

  AHCI BIos installed

  Drive 0 not found Serial ATA, SATA-0

  Drive 1 not found: serial ATA, SATA-1

  Strike F1 key to continue, F2 to run the Setup utility

  And this is where the boot process stops. Yes I can by pressing F1 and the safe indeed continue, but I do a lot of remote computer management and am not always on the keyboard to press the F1 key. BIOS A08, 4 GB ECC RAM, 120 GB SSD, processor Xeon 2.66 onboard with a nVidia Quadro FX4500 nice... at least it was good when I bought it at the time.

  If you, my people, I humbly request your entry.

  Sincerely,

  Planned

  Hi PLANNED,.

  Also, try the procedure below.

  * The card system has 3 SATA Ports and 4 drive Ports.

  * Please connect the HARD drive to the HDD0 Port.

  * Access BIOS, SATA AHCI, SAS controller operation value: disabled.

  Disable unused SATA PORTS and maintain the SSD as first boot device.

  Let me know if still face you any other issue.

  Sincere greetings,
  DELL-Loïc M
  Professional community and social media
  #IWork4Dell

• Problems of precision 690

  I have Windows 10 technical preview on my 690 and I can't. I try to run the Dell technical support. It gives me this:

  "We are unable to recognize the service tag detected through our analysis. Please restart the scan or contact technical support for assistance. »

  What is happening with it? I entered my serial number manually and also used the software to detect it. Any suggestions?

  Thank you

  It worked! Everything is off the Execute Disable bit: in Bios/security and Win10 loaded on the Dell Precision 690 with no problems. Thanks for the idea! {:>) I guess I'll have a spare MB now at least. Was only about $30 with installed 3 GHz proccessors on Ebay. Thanks again!

• Failure of Dell SAS 5/ir Firmware update - Precision 690

  I tried to update the firmware on a precision 690 Dell SAS 5/ir and it failed.  I now get the following message when I boot.

  Could not load the LSI Logic Corp. MPT BIOS

  Lack of MRT BIOS 02 h met (XXh, XXh or XXh) PCI adapter

  Fusion-MPT Firmware error code 0706 h

  This machine is the way out of warranty, but works very well.  I have here do anyway to reflash the firmware?

  In case someone else has the same problem.

  Unzip the FIRMWARE. CPE and run the MPTUTIL, then load xxx.fw, then load xxx.rom

  Solved the problem in five minutes

• Installation of SAS drives in Precision 690

  Hello

  I have a bunch of 10 k Fibre Channel SAS drives and I'm trying to install in a Precision 690. They seem to have connectors with 40 pins at the rear, a model example is the Seagate ST3146707FC.

  Is it possible to do? If If you could point me in the right direction in terms of what parts I might need. According to the manual, it can support 4 SAS and SATA drives, so I would use a SATA and SAS together potentially 4 drives.

  Thank you.

  Hi Hierchon,

  It is not possible to directly connect the Fibre Channel interface 690 PWS.

  These CF disks a SCA2 aka SCA40 connector and SAS uses a 32 as SATA connector.

  In order to use the FC disks, you need some type of housing CF or SAN which would then connect to the PC via a FC HBA.

  The SAS cable is necessary to attach a SAS drive to the PWS690 is identical to the SATA to the motherboard, but in training, data and power connectors are gathered.

  The PWS690 has two controllers. The ports labeled SATA go to the regular Intel SATA controller and take only the SATA drives. The ports labeled HD_0, etc, go to the SAS5 integrated RAID controller which will have SAS or SATA.

  I hope this helps others with these issues since this question is 9 months old. :-(

  -rocky

• High CPU temperature in precision T1700

  Hi, I have a brand new T1700 precision, computer I noticed when running folding at home, or if I use the Stress Test Dell CPU has a temperature of 72 ° C, I have an Intel Core i7 4790 of 161 ° F using Windows 7 Professional 64-bit SP1 with NVIDIA Quadro K620 it also runs high if I run Windows Malicious Software Removal Tool , I logged the Dell Diagnostics Partition and test a fan and they all work very well, I also did a fan control override in the BIOS and the Temp is normal when I run the stress test, but I have a strong fans any help would be appreciated

  

  Did you read the thread (long enough) here on the Intel forum?

  You are not alone in saying that this CPU running hot...

• Re: Temperature Normal CPU but the fan is noisy

  Hello

  My average CPU time are 45 on idle and 75 when you play. So, what causes the fan being a little louder than usual, although having normal time? It's not that loud and I could live with it, but I'm afraid it's something wrong with the fan.

  Also, I checked PC Health Monitor and the fan speed is at 50% is STILL on idle. It is 50% from the first day, but the noise is more noticeable now.

  PD: Laptop is 1 month old.

  Post edited by: iroha

  I put t think that there is a problem with the cooling fan. It is controlled automatically. What you can try is to modify the parameters of the method of cooling.
  You can find it in the advanced power options > power Toshiba settings. Assign the optimised battery.
  This should reduce the activity of fan cooling.

  Please test and post comments.

• Question OS/Hardware Dell Precision 690

  Hello

  I have a 690 w a single dual core running Windows 2003.  It has Mo MY171 rev A01.

  I put processors Dual quad X 5300 inside?

  What are the chances of getting work Windows 2008?

  What are the chances of getting work Windows 2012?

  Will be one of the Socket 771 X53XX Xeons in there?

  I put processors Dual quad X 5300 inside?

  Yes: http://www.dell.com/downloads/global/products/precn/en/spec_precn_690_en.pdf

  What are the chances of getting work Windows 2008? What are the chances of getting work Windows 2012?

  Good, but this is not guaranteed. It takes the server processors does not mean that it will support server operating systems. The details have never wanted to be servers - workstations. There is a good chance that you can load a server operating system and have it work perfectly, but there is also a chance that some of the equipment is the only quality work station and don't have drivers that will work correctly.

  Will be one of the Socket 771 X53XX Xeons in there?

  -What? Adapt? Work? 771 all fit, but not all of the 5300 X may work. See the data sheet above. 5300 X are supported, but not necessarily all of them. The data sheet says "up to" 1300 MHz and 2x4MB / 8MB, which means that if all processors X 5300 exceed these specifications, they may not work (unless the support has been added specifically through the BIOS update).

• upgrade processor for precision 690

  I have a slot on my motherboard for a second processor don't know what motherboard I have or the version of the bios I have Proccesor Intel Dual-Core processor Xeon type 5140 2.33 GHz, what do I need to buy or do in order to have 2 processors in this pc... thnks

  mtchll1

  Hello

  In this case, the system supports a secondary processor, but then the secondary processor that you plan to install should have quite the same specifications of the main processor and it must be installed with the heat sink.

  If you can send the serial number of the system via private message I can look in the details of the system to notify the processor part not and for the part, you can contact an external supplier.

  If there are issues more feel free to reply to this thread of the community, we will be happy to help you.

  Sincere greetings,