Temporal and records of decision rules

Similar Questions

• Program generator: try new decision rule vs waiting for a specified time.

  I want to just make sure I understand: when I use the rule of decision re feature - try, for example, for a week, members "sit" at the level of decision rule for a week before moving on to the next step?

  Currently, I use steps of waiting and no rules of decision to try again. For example, I have a step 'send an email 1', then another step "wait 7 days", then my decision rule is "Outlook opened email 1", way Yes leaves program, no path sends e-mail 2.» It would be better if instead, I 'send email 1', and then the decision rule "they opened email 1", way Yes leaves program, no way would try this rule of decision for 7 days and then send to "email 2" step without using the waiting stage?

  I do not use try again for more than hourly, if my Bulk mode would be unaffected.

  So, what are the advantages of disadvantages of the use of each? Any preference?

  Thank you!

  P.S. I'm on E9 - not sure if it matters.

  I was just thinking about this same question a few days ago. I usually use the rule decision try again, because if I understand he would check to see if the answer was Yes every hour and if yes go this person right then. If the answer is Yes, a day after the sending of the email they would pass to the next step instead of having to wait 7 days.

  However I just has a new society where they still use the waiting step not the retry. It's a good question, I think that the best answer would be that if you want people to move as quickly as possible use try again and if you need to wait 7 days of calendar between the emails use the waiting stage.

• Hide the header and show the child lines in the record of decision

  Hello

  I have this requirement, where I need show only the child report of lines and hide the out line of position. Is this possible?

  For example. The report from now looks to below: -.

  • The ABC test form is col.
    • Question1 is pass
    • Question2 is pass
    • Question3 is Yes.
    • East 1/Question4.
    • Question5 is running.

  
  

  I want to make my report decision to look like below without the line " " The ABC test form is "

  • Question1 is pass
  • Question2 is pass
  • Question3 is Yes.
  • East 1/Question4.
  • Question5 is running.

  Kind regards

  Suan
  

  If you set the attribute 'the ABC test form is pass' silent that it will not be displayed in the record of decision, but its subitems will be.

  1. Make sure that the attribute "the ABC test form is pass" is a properties file
  2. Double-click it in the file properties, and then select the record of decision.
  3. Check if Invisible: 'True' option.

  See "Hide in a record of decision information" in Oracle user modeling Strategy Guide

• Conditional evaluation of program steps after a decision rule

  Available in the program action steps have this note when you pass the stage immediately after a decision rule:

  (Please note: conditional assessment of this step is not permitted, it can not be placed immediately after a decision rule)

  Means that we can have only a particular action as the very next step after a rule of decision? Or does that mean that you can have this action after a decision rule but must always apply the action and just may not apply a condition it? The formulation leaves me a little puzzled.

  Thank you.

  Rob,

  This message indicates that you cannot perform this step conditionally because it follows a rule of decision. You can, however, always use this action, but it should still run. If you need to apply a condition to this step, place a direct step between the decision rule and your condition step. This will allow you to set your conditions.

  Brad

• Clicked by the decision rule

  I am creating a program and I'm using the rule of decision "Clicked through specific E-mail Web site". When the "Mobile view" or "Manage preferences" link in the email is clicked, is the part of the clicks that will use the decision rule?

  Check the HTML source code on the header and/or footer assigned to the email. It will look like this if it has the redirector link instead of a direct link with the object.

  Eloqua redirect link:

  http://now.Eloqua.com/e/er.aspx?s=xxxx&lid=1055&ELQ= recipientid

  Direct links to other objects are the following (if you use the provided OEM modules)...

  Read online:

  http://now.Eloqua.com/es.asp?s=xxxx&e=53447&ELQ= recipientid

  Global unsubscribe:

  http://app.EN25.com/e/u.aspx?s=xxxx&ELQ= recipientid

  Management of the subscription center

  http://now.Eloqua.com/e/SL.aspx?&s=xxxx&ELQ= recipientid

  Read on mobile

  I don't have it. Anyone want to post it for me? ;-)
  

• How can I use ODE independently OWD unaided, but showing the record of decision?

  Hi all

  I want to integrate the OPA with my java application without using the OWD.

  But how can I show the record of decision like that of OWD?

  Thank you

  This should be fairly simple. You can obtain a record of decision of the engine API. The decision paper referred is a tree of nodes that are very similar to the decision in OWD HTML report, it should just be a matter of this tree to market and building an html like structure.

  Take a look on example: retrieve a record of decision for an example of how to retrieve a record of decision.

• Using the record of decision in the Java API

  Hey all,.
  
  I work with an integration of Java of the OPA, and I'm curious to know how to exploit the record of decision by using the Java API for the information I'm after.
  
  Basic example:
  
  X = Maximum (A, B)
  
  In a record of decision, I see that A and B are used to determine X, but is there a way to know what is done with the API? I know its somewhere, I just need to get to work!
  
  Another example:
  
  X = (A - B) * C
  
  How can I retrieve what exactly happened in java using the API? Is this possible?
  
  Thank you!!!
  
  Dan

  Dan,

  Records of decision (code or xml) unfortunately do not go into that kind of detail. Records of decision describes what values are relevant and values assumed under influence, but they have no detailed calculation of information in them.

  It is not possible to do what you are trying to do.

  See you soon
  Frank

  Daniel Hager wrote:
  Hey all,.

  I work with an integration of Java of the OPA, and I'm curious to know how to exploit the record of decision by using the Java API for the information I'm after.

  Basic example:

  X = Maximum (A, B)

  In a record of decision, I see that A and B are used to determine X, but is there a way to know what is done with the API? I know its somewhere, I just need to get to work!

  Another example:

  X = (A - B) * C

  How can I retrieve what exactly happened in java using the API? Is this possible?

  Thank you!!!

  Dan

  Published by: frank.hampshire on April 10, 2013 10:42

• Display only relevant base-level attributes in the record of decision

  Hello
  
  I use determinations OPA 10.2 on weblogic server. The service I use is to evaluate. What follows is a knot in my decision report:
  
  < ns0:attribute - node id = id of the entity-'dn:88' = instance id 'global' = 'global' hypothetical instance = "false" attribute id = "b2@Rules_ExternalCalls_EXCommon_doc" type = "boolean" text = "information to make calls of motor voters were collected". deducted = 'true' departure-relevance = "" end-relevance = "" > "
  < ns0:boolean - val > true < / ns0:boolean - val >
  < ns0:attribute - id = the id of the entity node-'dn:89' = 'global' instance = 'global' hypothetical instance id = "false" attribute id = "q_Register_To_Vote" type = "boolean" text = "the applicant does not register to vote." deducted = 'false' start-relevance = "" end-relevance = "" > "
  < ns0:boolean - val > false < / ns0:boolean - val >
  < / ns0:attribute - node >
  < ns0:attribute - node id = id of the entity-'dn:90' = instance id 'global' = 'global' hypothetical instance = "false" attribute id = "Political_Party' type = 'text' text ="political party is unknown."deducted = 'false' start-relevance =" "end-relevance =" ">"
  < ns0:unknown - val / >
  < / ns0:attribute - node >
  < ns0: already proven node id = "dn:13" / >
  < / ns0:attribute - node >
  
  As can be seen, even though the goal has evaluated to 'true', as 'q_Register_To_Vote' is set to false, it always shows "Political_Party" is unknown. However when I debug without screens setting in OPM ' relevant only "and provide false for 'q_Register_To_Vote',"Political_Party"is hidden in the resulting tree/decision report. How this behavior be simulated in determinations server evaluate the service decision report?
  
  Thank you
  Sam

  The reason for which political_party appears in the record of decision is because it is actually relevant. For more information about the relevance in the decision reports see http://docs.oracle.com/html/E24270_01/Content/Decision%20reports/Hide_an_attribute_from_decision_report.htm.

  You can remove the attributes in a record of decision using the silent operators and / or Invisible. For more information on this, see http://docs.oracle.com/html/E24270_01/Content/Reference/Definition_of_relevant_in_decision_reports.htm.

• How to download and record a song on Firefox?

  When I want to download a song, it goes through flash player only, please tell me how to download and record a song on my phone using Firefox.

                            I will be thankful to you.
  

  long press flash and select Save audio

• Toshiba 39L4353RB 7.1.56.36.01.1 TimeShift and record on the issues.

  Hello.

  I have Toshiba 39L4353RB with the last aviable f/o 7.1.56.36.01.1 for this model.
  There are no options for TimeShift and recording in the Menu.

  I chose countries Germany, DVB - C (digital TV) CAM module.
  I insert USB HDD, but it there was not all the settings in the Time-Shifting Menu.

  (1) was this option disabled in f/w 7.1.56.36.01.1?

  (2) can I put 39L4353RB manually (by usb flash) for the latest f/w 7.1.90.34.01.1 (another country for L4353 code) to allow the TimeShift?

  You reset the TV after the update of the firmware?
  If this is not the case, first of all do!

  TO use the Time Shift you must go through the configuration of the recording.
  You must choose the HARD disk and partition you want to save.

  What is described in the manual user 51 page-> [Toshiba 39 L manual 4353 | http://www.toshiba-om.net/LCD/PDF/English/L4353-323950-English.pdf]

• I can't use the microphone in my headset for Skype and recording programs

  Hello...

  I can't use my microphone in my headset for Skype and recording programs.
  Can someone pls help? I tried the camera on my phone, it works perfectly.
  I use v8.00.03 (T) Edition Premiun.

  Post edited by: worldliner

  Sorry mate but could you be more specific?

  > I use v8.00.03 (T) Edition Premiun.
  What does that mean? Toshiba BT stack or what?

  There is a new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba
  Its v8.00.12

• Qosmio G40: How to watch and record digital terrestrial television

  I bought this G40 to watch and record digital terrestrial television, but apparently can't find the interactive parts (red button) of the transmissions.
  Toshiba has said I have to use a set - top box. What is c? It is not a machine for processing of digital information? That is to say a computer?
  Why can't it do it?

  In addition, the teletext on the remote control key does not seem to do anything.

  Does anyone know how it could be improved?

  Hello

  What computer G40 laptop do you have?

  Your Qosmio G40 is equipped with a DVB - T receiver?

  A description box what a decoder means here:
  http://en.Wikipedia.org/wiki/set-Top_box

• Best imac for the video editing and graphic design and recording of gameplay

  Hey guys I'm looking for the best imac laptop or desktop for video editing and recording of gameplay with capture card so if you are familiar with the desktop imac or laptop please leave commect to the best imac computer

  and care to capture the card to operate at its best

  • OS X 10.9 or later version
  • 2nd generation Intel Core i5 CPU (i5-2xxx or comparable), 2 Ghz or higher, before Turbo Boost
  • 4 GB of total RAM installed (or higher)
  • Built-in USB2.0 port

  I put spec for you guys can work find best computer imac

  Looking for a new or a used computer?

• Reading and recording of several channels simultaneously

  I use a NI PCIe-6363 map to acquire data from various sensors in an experimental engine.  I need to be able to show views and record data on all channels simultaneously.  I'm relatively new to Labview, so I think I'm doing things inefficiently.  I am also having a problem with the display of multiple signals.  I have attached the vi.  I look forward to the advice.

  DAQmx is able to take multiple samples at the same time, so you need only a wire covering your While loop. See this example VI that comes with LabVIEW. You can find others with the help > menu examples and digging from there:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\examples\DAQmx\Analog Input\Voltage - Input.vi continues

  Initialization DAQmx VI would need another kind of entry rather than "PXI1Slot2/ai0. I forgot the exact syntax, but it would be something like "PXI1Slot2/ai0-15". In addition, the read DAQMx VI is polymorphic, so that it can read all these channels in sub form of table. Then, you have to build the table of these PXI objects to initialize DAQmx VI with the function 'Building the matrix' of LabVIEW and indexing table in 16 items with function "Array Index. You only have a single function Index Array, expand right down it and it automatically will give you items between 0 and 15 (or however far you develop) without having to wire in all indexes.

• How to continually take and record waveforms with neither 5102

  a machine generates waves sinusoidal time randomly. I want to permanently take and record waveforms in 10s by NI 5102.

  How to do?

  Thank you very much!!

  Thanks for the review! but this isn't a supported NEITHER.

  I record signals by this method.

  and the promble news is that different sampling frequency, the different wavelength. for example, when I put the sampling frequency is 4 k, the wavelength is 12 seconds if the sampling frequency is 10 k, the wavelength is 8 seconds the signal under test 1 k, the time constant is 10000.

  now, I save waveform to 10 sec. What is the best relationship between sampling frequency and the time constant?