Temporary monitoring M40X-184 and fast card

Similar Questions

• Error message on Windows 2003 and Satellite M40x-184

  Hello
  my laptop is Satellite M40x-184
  with Os Xp Home edition
  I want to insatall a second operating system which is Windows 2003
  but when installing it, came a problem and gives me a blue screen with this message:

  "' hardware malfunction nmi parity check / memory parity error is interrupted" "

  Please tell me how can I install 2 Os xp home edition and Windows 2003

  Thank you

  Hello

  This error message can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  To resolve this issue remove additional memory modules that are installed on the computer, leaving only the minimum required for the computer to start and run Windows. Restart the computer to see if the error messages persist.

  This issue has been described on the Microsoft Web site.
  Please see this site:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

• strange monitor beep sound and blank when I installed the graphics card XFX Radeon HD 7870

  OK, so I removed my GTX 555 after that I bought a brand new XFX HD 7870, installed and activated on the pc.
  The monitor was empty and the pc tower was 5 beep sounds, then pause and repeat, over and over again until I turned off. When I replaced the GTX 555, all was well again, so I know this isn't the other components.
  Any suggestions?

  See http://products.xfxforce.com/en-gb/Graphics_Cards/AMD_Radeon%E2%84%A2_HD_7870/FX-787A-CDFC.

  You will need an adapter and you may need a new power supply.  Note the minimum requirement of the PSU of 500w.

• M40X 129 and slow Intel WLAN

  I have a new M40X 129 and a netgear wg602 Access Point.

  I tried several versions of Intel for the Bg2200 driver but all have the same problem:
  After a while the performance of the connection drops to
  about 30 KB/s. My other Clients WLAN with a map of network without WIRE WG511 (Toshiba 300 CDT) works with normal Perfomance.

  Sometimes the perfomance raises more than about 1 MB/s and it goes up and down.

  What is the broken hardware? Someone has an idea what to do?

  Peter

  Hi Peter

  I've heard of this problem, but AFAIK there's no bug or malfunction of the equipment. One of my friends looked for answers and he told me that this question may be just a problem of Intel because with one another like Atheros wireless card it should not happen.

  If I understood him right it depends on the method of authorization or something like that. If there is a possibility to try to use wifi PCMCIA card to check if there is the same problem.

  Sorry, but in my opinion there nothing to do.

• Audio does not work on Satellite M40X-184

  Hello

  N Malgas Johannesburg South Africa here.

  I picked up a virus on my Satellite M40X-184 that weaken my audio device drivers.
  Relaoded Windows XP Home Edition and Audio devices still does not.
  Looking for a way to reload the drivers.

  Any help would be appreciated.

  Hello

  I think in the first place, you should check in Device Manager if no yellow exclamation point is visible. This could help you know whether or not the audio driver has been installed correctly.

  You will find the page of the Toshiba Realtek driver audio v5.10.00.5740.-T
  You must first uncompress it before starting the installation. You can perform the installation of the audio driver also from Device Manager

  After installing the driver of its success, you should look in the audio and audio devices. This option is located in the control panel.

  Check if the "secret" was not enabled and go through the unique volume controls and set it to a higher level.

  Good luck

• Satellite M40X 184: is my HDD ok?

  Hello I have a Toshiba Satellite M40X 184

  When no program is running my hard drive works from time to time make boring of the loud noise from time to time its not but I am curious to know is - this normal?
  could someone tell me

  Hi Tom,

  If you are running Windows XP, then it's quite normal that your hard drive show activity from time to time. You will have several active processes running that will periodically access the hard disk.

  You can also have background tasks that will periodically throw in life and cause a disk access activity.

  Kind regards

• How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  I have a virtual network adapter that is created with Broadcom.

  This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

  This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

  Someone has an idea?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.

• Why my monitor keep flickering and go empty all the time I have to wait until it stops

  When I get on the pc my screen starts flashing on the screen becomes black in and out, I click on something and he goes crazy, please tell me why tommie finney

  Hi tommie finney.

  -How long have you had this problem?

  -What software changes on the computer before the show?

  -Do you have installed the latest video drivers (display)?

  See the following and follow the steps listed:

  Flicker of the correct monitor (refresh rate)

  Get the best display on your monitor

  Troubleshoot monitor and video card

• PC hangs for a few seconds, and then return as normal and fast as always, no reports of any problems in the operating system.

  Hello world

  I have a Vista Ultimate SP2 system and all updates, my hardware is an AMD Athlon 64 x 2 3.2 Ghz with a RAID 0 (2 discs), 4 GB of RAM, video memory shared up to 1 GB, Asus M2A-VM Motherboard.

  My problem is that sometimes when you work with any my computer shutdown application package to meet any keyboard or mouse control for 2-3 seconds and suddenly come back with tasks in the queue and fast as usual.

  I've updated my Chipset and RAID drivers.

  I uninstalled ASUS ACPI Center who could be one of the causes of this problem, rename the executable to Center asus acpi.

  I ran TuneUp Disk Doctor to verify my RAID and fix problems

  I update and updated my Antivirus ESET Smart Security in order to improve the performance of the process EKRN who sometimes take a large part of the time CPU.

  Can someone advice me how track and what tools to use to run a diagnosis of systemd and check if my problem is with the hardware or the operating system?

  Kind regards.

  JUOX.

  Run process monitor. Stop the trace when your problem occurs. Look through the timestamps of the gaps.

  See this for an example of the use of Process Monitor to diagnose a deadlock:

  http://blogs.technet.com/markrussinovich/archive/2010/01/13/3305263.aspx

• Power supply and graphics card update

  Hello

  I own a HP p6610f desktop computer and want to upgrade my power supply and graphics card.

  Power supply:

  I saw recommended Corsair CX500 and I found a CX500M of Corsair for sale. I'm fairly certain that it will work with the graphics card, I'm considering the purchase. The CX500M would work with my device?

  Graphics card:

  I have need later in the technology of graphics card but I still want to improve my current AMD Radeon HD 4200. I plan an AMD Radeon HD 6570 because it meets my needs and fits my budget. Would this work with my p6610f and a PSU Corsair CX500M?

  If it helps, I want to update the graphics card to play some place the modern games (Assassin Creed Revelations and maybe Assassin Creed 3 on low heat) and possibly install a Blu - Ray player.

  I ask because I can't seem to find an answer clear enough to calm my fears to ruin my computer if I go with these two options.

  Thank you!

  Food: The CX500M of Corsair is a great choice and will definitely enter the computer.

  Graphics card: you can get a Radeon HD 6670 for the same price as a Radeon HD 6570 and on a faster card of 20 to 25%. Or a little more money, you can get a Radeon HD 6770 and about 125% faster. In all cases, measure from the rear of the case further along the PCIe x 16 location plan. Just shy of an obstacle comes as long of a card you want.

  Please send BRAVO

• Dell Latitude E6520 2 separate monitors with HDMI and VGA connection.

  Hello

  Is it possible to connect 2 external monitors to this model and (with the laptop screen) have 3 monitors altogether? Someone set up hardware hes like that before? It works and is ok with this configuration nvidia card?

  Or is it only the opportunity to work with 2 monitors a time?

  Any help would be great.

  Hi all

  I want to give back to the community a 100% working way additional conecting 2 moniors (maybe more even with docking station) and have 3 screens working altogether (2 outside and 1 notebooks).

  3 things are needed:

  -Intel HD graphics driver

  -Nvidia driver

  -Active Optimus in the bios

  (set up in this order: activate optimus, install intel hd, install nvidia)

  Make sure that the drivers are properly installed. Download driver intel hd dells site driver nvidia and the nvidia site.

  As a result, it is possible to assign 1 monitor to the nvidia graphics card and other intel hd grapgics card 2. Then, it looks like this in config nvidia:

  

  This works 100% :)!

  Now, he is trying to connect as much as possible :).

  Hope this help anyone!

• HP Pavilion Elite HPE-210y - upgrade power supply and graphics card?

  You just bought a new computer that I am generally satisfied, but it is not fit to play top games I like (for example Metro 2033).  I was looking into upgrading my graphics card and discovered that I have a 300W power supply.

  I heard that HP computers are notorious for difficulties in upgrading equipment thanks to the compact design the area.  What power supply and graphics card I should be able to use?  Information links and price would be very appreciated.

  I use my LG HDTV 32 "as a monitor and my current graphics card allows me to connect using an HDMI cable and play movies blu - ray via my PC.  I want to keep this feature.

  Thanks for any help!

  You need to open your PC and measure the physical dimensions of your diet.  Here is a list of the things to consider:

  1. Specifications
  2. Total power - important
  3. amperage 12 + v - important
  4. Modular - is not required, but I like the flexibility
  5. Warranty
  6. I7 and SLI ready
  7. Efficiency rating
  8. Cost
  9. The physical size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths

  www.Newegg.com has many choices of power supplies.  Corsair, OCZ, Rosewill, Thermaltake...

  The amount of amperage + 12 volts is important when choosing a video card.  Depending on the size of the Cabinet from HP a 550-600 watt PSU should be plenty.  The NVIDIA GT 460 should be a good choice.

• CS 5.5 and video cards

  I got ahead and pre-ordered CS 5.5.  I'm pretty happy with 5.0, but I never install on my laptop and have since bought a new laptop with a Sandy Bridge Quad Core 2820 processor and a Nvidia GT555M video card that I would like to install 5.5.  Is it possible to change the startup file so that the Mercury engine will recognize the GT 555 M video processor on the laptop with 5.5?  If you are editing so this file is and how do change you it?  The 555M is a bit faster than the Quadro 2000 M and 2800M.

  -Roger

  You can add it to the text file (see this link for instructions), but there is no guarantee this will work perfectly: you may need to play with Optimus to ensure good GPU is used and there may be an occasional disconnect during rendering, as the GeForce cards are not designed to operate at full power for long periods of time , especially in a laptop. We have no data test for the CS5.5 currently 555 M and of course is not on the approved list, but the plug is better than a number of other maps users report that work in an acceptable way.

  Keep in mind that if a fast card, will boost performance significantly, it'll do in some ways. If you are made of formats highly compressed such as the ACHVD or reading very large files, the speed of your processor and the disk will be the factor limiting - and so you will not see the 'real' power of a GPU upscale on a laptop, unless you invest in things such as SSDS, and you have enough ram by heart (at least 2 G of each) to allow the multi-threaded renderer correctly.

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.