Test component of oscilloscopes

Similar Questions

• Test item unit missing after upgrading to 3.2

  I've recently updated (just install it over the previous version) the sqldeveloper of 3.1 to 3.2.20.09.

  Since the new facility, the unit test component is missing. After some research, I found that the entry in Control Panel help/info/improvements:

  Oracle SQL Developer - Test Unit oracle.sqldeveloper.unit_test 11.2.0.09.87 Deaktiviert durch Benutzer (= > disabled by the user!)

  It seems as if she was disabled in some way. I don't know certainly more disabling components/improvements, especially the unit test framework.

  How can I reactivate it?

  Hello

  Unit test is an extension of the SQL Developer. A new facility will always have it enabled. At any time you can disable this extension by going to Tools/Preferences/Extensions. Here, you'll see a list of extensions that you can disable. When you uncheck the box, the extension will be disabled once you close your SQL Developer session. To activate, you just return to this list and check what you want, and then restart.

  In this case, Jim is right to say that you have a corrupt installation. A new installation will fix it.

  Ashley

  SQL development team

• HP Pavilion 17 Notebook PC: Realtek RTL8188EE adapter wifi connectivity issues

  Help, please! I had bought this HP Pavilion computer with operating system Windows 8.1 and did the upgrade of Windows 10, when it came out. My wifi worked well until a few months ago. Now, I lose connectivity constantly. I searched the forums and tried everything I can find. I have the Realtek RTL8188EE 802. 11 b/g/n adapter Wi - Fi. All is well with our router, like all other electronic devices in the home are connected to the internet just fine. It is located in the same room and never had any problems connecting to the front. I drove back to 8.1 for Windows, made sure I had the latest drivers from the adapter, and then restored to older versions, tried to change minor settings on the adapter (i.e. make sure that power management area is not checked). I uninstalled the driver and removed the software, then restarted. Checked to make sure that the wireless encryption is WPA. Is there anything else I can try? I use this computer for my business and need to work. Nothing I've tried has fixed the problem.

  Hi @jborgwardt,

  Thanks for the reply.

  Sparkles1 is absent today. I'll follow your post.

  I just want to confirm if the current version of the wireless network adapter driver is 1.0.0.17 Rev.A sp68120.exe in your device manager.

  Also, please run the test component in the UEFI Diagnostic Hardware for wireless module:

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  Let me know if it satisfies the test of material.

  Kind regards

• Computer laptop-15-ab101au Pavilion: Pavilion Notebook laptop computer restarts randomly

  Hi all

  I bought my laptop in November 2015 and Harvey Norman installed the SSD to purchase, everything worked fine, then in December 2015 the computer started making reboots random while I was in the middle of using it.

  I have no error message to warn me, most of the common time is so that using the internet pages via a mobile wireless modem, it never happens while I watch a film for instances.

  I ran a test of the system and receive this message

  test component - failed

  Primary HARD drive Bay

  I also have a failure if necessary identification number

  Can anyone help that I must return to the shop or it's something that I can fix it

  Thanks Cath.

  Hey Cath,

  The error code is a failed hard drive optimized - this seems to indicate that the player is running out and must be replaced.

  My best advice would be to return it to the retailer or contact HP and arrange for the laptop repaired under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• IMPOSSIBLE TO ACTIVATE TOUCH SCREEN

  I HAVE a HP PAVILION TOUCHSMART 21-h010.  I upgraded from windows 8.1 for windows 10 and and the touch screen is no longer available to use.   Microsft tried Tech allow the driver to activate the touch screen, but she got an unknown error and don't settle.

  Hello

  Try this...

  Turning the unit off.

  Once you press the Power On button, start typing the key F2 on the keyboard (immediately after that you reach the power button). It brings you to the hardware diagnostic Interface.

  Choose your language and goto the option that says test component. Under component Test, goto screen tactile Test and take the two tests that would give you. Let me know how comfortable you can use the touchscreen to perform the tests.

  When finished, exit the diagnostic Interface and the Windows logon, it should help.

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the lower right side of my post to say thank you! ***
  I am an employee of HP

• HP Probook 450 G1: Windows 8 HP recovery disks has not detected

  Hello

  In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

  If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

  I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

  I hope you got my problem.

  Product number: F6B14PA #ACJ

  Thank you

  Hello

  Thanks for posting in the HP Support forum.

  Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

  I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

  To be honest, I don't know why it is not detected, but there are some things you can try:

  -Boot in the BIOS and disable secure boot + turn on Legacy mode

  Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

  Details > > http://support.hp.com/us-en/document/c03653226

  -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

  keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

  I would like to know if it works for you.

• HP Jet 7 loading screen

  I just bought a HP Jet 7 and plugged the usb charger. Apart from an original pictogram on the screen there is no way of knowing if his load and I can not get no sense from Microsoft or HP. My other Tablet has a led that lights up in red when charging and green when the accused. How do I know if its charge when not turned on?

  There is no charge indicator light on the tablet of flow, the original pictogram is all you get.  You would have to start in Windows if you want to check that it is still in charge or what percentage it is charged.  You can also run diagnostics UEFI F2 and select the battery test component and it will indicate if the AC adapter is connected and what is the level of battery charge.

• COMPUTER LAPTOP WON'T POWER ON WHEN I PUT THE BATTERY

  I have a laptop HP PAVILION DM1 and don't know why is my battery does not work with my laptop.  Everytie I put it in the laptop computer shutsdown. I'm using the power of the AC adapter / CC always connect... but I want to bring my laptop outdoors... Please help me guys thanks a lot

  blulytman wrote:
  

  When I turn on the LED color is white...

  Please deliver me by providing answers to my previous questions.

  Have you tried using the UEFI PC Diagnostics component test for the battery?

  Press the power button and immediately press the ESC key to access the boot menu. In the boot menu, press F2 to invoke him lying Diagnostics. Choose the test component, and then click battery. If the battery of test run used, the battery may have failed.  If you plug the power adapter with the battery and battery, and he needs a charge, the led color should change to amber in most HP laptops. If it is not the case, either the battery or the motherboard has failed. There is a test of component systemboard which is part of the Diagnostics UEFI component tests. I suggest that you perform this test. It can be done without the battery installed.

• SMU remote system do not read file .lvm

  I try to get my remote system (SMU remote system) to send a signal of analog voltage by reading a file .lvm.

  I have a project in real time implemented, and under my remote system, I have a VI that is supposed to give a signal of analog voltage.

  The implementation of VI begins by reading a file position (.lvm). After that, it is connected to a DAQ assistant.

  I'm already sure that everything is connected properly, and that it is the right channel. The reason why I'm sure is because in the DAQ assistant window, I can click on "run" in order to send a test signal. I am able to capture this signal to test with an oscilloscope. Therefore, I am sure that the system is all set up correctly.

  Finally, I don't know if it's important, but the measure file he was reading is located in my host. I don't know if I deploy when the VI to the target, if the measurement file is sent to the remote system with the VI.

  I was wondering if someone could help me please.

  Thank you

  Leon

  Hi Leon,

  If I understand correctly, you are trying to read a file .lvm waveform data and send this waveform through your SMU system. What devices are specifically using (chassis, modules...)? What exactly happens when you run the VI? You see errors? If so, what are the codes that come with these errors? Additional information on what the file .lvm would be also useful. What are the functions you use to play the .lvm file?

  Kind regards

• [Folio 13-1020us] SD card reader stopped working suddenly

  For about a year, I had an SDXC card in the card reader integrated my Folio 13-1020us.

  It was fine until a few days ago. Then something that I was downloading it has not completed, which is how I noticed that he had ceased to work. Now, it does not appear in the drives in my computer, and it does not appear in Device Manager.

  In an older HP laptop, I can at least see the letter of the card reader and the name that I gave him, so I think that the card itself should be fine. But I don't see anything when I place it in the Folio.

  I have a feeling that the drive itself has failed. I'm out of warranty by a few months. What I have to extend my warranty and send it to get it fixed? I don't want to use an external drive, because I use the card as extra storage space.

  Operating system: Windows 7

  SD card: Mark PNY, 64GB SDXC

  If the card works on other PCs, the card is OK.

  It is regrettable that there is no diagnosis for the card reader PC Diagnostics UEFI test. You can. However, to run the test component from the system board.

  The next step in troubleshooting to make sure that the issue is not with the operating system, perform a recovery or a refreshment. Both of these measures involve delete all your data, so It is recommended that you copy all the important data to an external storage device before a refresh or a HP Factory image recovery.

  To the factory image recovery, you will need to call the HP Recovery Manager. Access Recovery Manager HP when you are connected to Windows or by using usb recovery media you should already have created now. Invoke the charm of the search and the type of recovery.

  

  If niether of these procedures did not have a positive effect, then the problem is probably likely to be a problem of Board of Directors system and internal. The only way to solve that resides at the center of Service HP.

• HP 15 Notebook PC L3Q92EA #ABU: HP Pavilion, 8.1 Win "Please wait" when the unlock screen saver

  Just bought an HP 15 Win8.1 running laptop.  I think it's a huge pain to use.  Once the screen lock is committed, it takes forever to get the login screen to appear.

  I move the mouse or press a key to get the screen to go back, but I see is the screen "Please wait" for more than a minute then a background appears.  Click the mouse and I have one more minute of "Please wait" before the logon screen appears.

  Can anyone help, until the laptop goes through the window?

  Hello

  Thanks for posting your concern on the Forums for Support and sorry about the problem you are having. I went through your post and it sounds like I should be able to help with the problem.

  I suggest you perform the test (Test of the HARD disk) on the computer. Follow the steps below-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F2 - System Diagnostics.
  • HDD test would be under the Test component. (usually, it is recommended to test rapid and wide, but for now because the PC is new I rather suggest you simply run the Quick Test).
  • After you choose the Quick Test, click on run once.

  If he succeeds, you can proceed with the recovery, part if she fails to give a call to tech support at the number mentioned below, since the unit is under warranty, you should be able to get help to get the drive replaced.

  On the recovery procedure, its complete restoration of unit settings factory which means that the data on the computer is cleared and with it, the software that can be installed on it. Please follow the steps below to perform recovery-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F11 - system recovery.
  • On the next page of options, you can choose - "troubleshooting." (If it is a unit of windows 8, or you can skip this step)
  • On the next page, you will need to choose "Recovery Manager". (If it is a unit of windows 8, or you can skip this step)
  • On the next page in the first column, under "I need help immediately", you must choose "Reduced Image Recovery"
    • Now, here, you can get an option to backup your files, because it would be an option to say - recover after saving files or recover without backup of data.
    • You will need to insert the disc followed the screen - instructions here on and unit should be returned to its original state.

  Now if you need help email us back or call HP SUPPORT @ 1-800-474-6836 [24/7 SUPPORT].

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• HP Envy Ultrabook with Windows 8.1 - battery not charging not even if hooked up

  Just recently, my HP Ultrabook stopped the same battery if connected to the power source. Also when I remove the power connection, the laptop gets off immediately, it means that there is 0% charged battery.

  On the battery it monitor shows "40% available (plugged in, does not support). " I tried several things like turn off computer, connect to another power outlet etc but no luck. Since it is Ultrabook with envy, I can't remove the battery.

  Help, please!

  Thanks in advance!

  Did you run the test component UEFI PC diagnosis for the battery?

  Start button / stop--> immediately tap the Esc key--> when the start menu is called, press F2 to select the UEFI PC Diagnostics and then select test component--> battery.

  The battery can be removed and replaced if the diagnosis says that he didn't. Instructions to do this are in the sleekbook on page 43 Mintenence & Service Guide .

  I found the battery on sale on Amazon.com. I found it a bit expensive. Use Google or another search engine shop for a good price on the HP 681949-001 original part number

  http://www.Amazon.com/HP-681949-001-battery-primary-EL04052XL-PL/DP/B009SOIC8G

• HP Pavilion DV7 turns off suddenly when running

  I sincerely hope that you can help me or point me please in the direction from where can I get support for this problem.

  I bought a HP Pavilion DV7 - 3180us Entertainment Notebook to the United States in 2010.  I now live in England.

  My problem is that my laptop keeps turning off randomly without warning.

  Is my product number: WA718UA #ABA, my OS is Windows 7 64 bit.

  I ran each test component (HP System Diagnostics), all items sent with the exception of the hard.

  My test log shows the following error codes:

  PLQ36M-53L6M6-XD002J-Q2BX03

  PLQ36M-53L6M6-XD002J-61BK03

  PLQ36M-53L6M6-XD002J-61TT03

  PLQ36M-53L6M6-XD002J-61TT03

  PLQ36M-53L6M6-XD002J-60 CT 03

  My BIOS:

  F.1D, 10/05/2010

  I bought and tried a new battery, but this does not resolve the issue.

  (Any time), I use a Cooler Master NotePal U3 Laptop Cooler with fans positioned where my laptop gets hotter (down the laptop, when the laptop is in its normal in good position, the hot zone going from the upper left corner (about where is the power button), to down to about the caps lock key; the width of the side left on the F3 key). (This also does not resolve the issue.)

  I'm looking forward to your reply.

  Finally got support from HP (for some reason, my phone and my other half phone just kept to end the call when I tried to call, even if we had enough credit, could finally operate using Skype as Skype allows free 1-800 numbers even if you use Skype from the United Kingdom).

  In case it helps someone else out there he said:

  Only the fact that I have recently updated my BIOS would help with overheating problems. Any overheating problems that I knew could not be due to (for example) the motherboard or graphics card, etc. That it may be wise to have my radiator and fan replaced.

  Mainly: (no surprises) should I have my hard drive replaced ($155 - $200).

  For a person living in the United States the total costs (disk hard, heat sink and fan) would be $ 200 to $ 300 (cost of labor and shipping included).

• Query complex hierarhical

  Hi, Evereyone.
  Help me, please.
  I have two tables:

  create table GROUP_TEST (
  AA_ID number, //This is just synthetic ID
  GTID VARCHAR2(10), //This is test natural ID of group test
  GTTST_0 VARCHAR2(10), //This is ID of test component
  GTTST_1 VARCHAR2(10), //This is ID of test component
  GTTST_2 VARCHAR2(10), //This is ID of test component
  GTTST_3 VARCHAR2(10)); //This is ID of test component
  
  create table TEST(
  AA_ID number, //This is just synthetic ID
  ITID VARCHAR2(10), //This is test natural ID
  TYPE VARCHAR2(1));  //Can be 'G' for group test, or 'I' - individual test

  And we have data in it:

  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('4', 'T4', 'I');
  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('3', 'T3', 'I');
  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('2', 'T2', 'I');
  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('1', 'T1', 'I');
  
  
  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('7', 'G3', 'G');
  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('6', 'G2', 'G');
  INSERT INTO "TEST" (AA_ID, ITID, ITGT) VALUES ('5', 'G1', 'G');
  
  INSERT INTO "GROUP_TEST" (AA_ID, GTID, GTTST_0, GTTST_1) VALUES ('3', 'G3', 'T3', 'T4');
  INSERT INTO "GROUP_TEST" (AA_ID, GTID, GTTST_0, GTTST_1) VALUES ('2', 'G2', 'T2', 'G3');
  INSERT INTO "GROUP_TEST" (AA_ID, GTID, GTTST_0, GTTST_1) VALUES ('1', 'G1', 'T1', 'G2');

  As you can see, some some may consist of a group test group tests or some individual test.
  Now we have a tree:
  G1 consists of T1 and G2
  G2 is made up of T2 and G3
  G3 consists of T3 and T4
  
  I want to select all components of lowest level (individul tests) for each test group.
  This means that in the output should be:

  GR_AA_ID               GR_GRID    IT_AA_ID               IT_ITID    IT_TYPE 
  ---------------------- ---------- ---------------------- ---------- ------- 
  1                      G1         1                      T1         I       
  1                      G1         2                      T2         I       
  1                      G1         3                      T3         I       
  1                      G1         4                      T4         I       
  2                      G2         2                      T2         I       
  2                      G2         3                      T3         I       
  2                      G2         4                      T4         I       
  3                      G3         3                      T3         I       
  3                      G3         4                      T4         I       
  
  9 rows selected

  Is it possible to get this result?
  Thank you!
  
  Published by: JustasVred on June 15, 2010 04:36

  The reason why it is 'complex' and is not simple, because of your non-standard data model.
  The columns of gttst is repeated in the table group_test. To build your hierarchy, ideally this should be fixed in your datamodel, but here I fixed it within my query.
  In real life, you want to take CPU cycles at this problem every time the query is executed.

  SQL> with group_test_reformatting as
    2  ( select aa_id
    3         , gtid itid_parent
    4         , case l
    5           when 1 then gttst_0
    6           when 2 then gttst_1
    7           when 3 then gttst_2
    8           when 4 then gttst_3
    9           end itid_child
   10      from group_test
   11           cross join (select level l from dual connect by level <= 4)
   12  )
   13  , group_test_reformatted as
   14  ( select *
   15      from group_test_reformatting
   16     where itid_child is not null
   17  )
   18   select connect_by_root gt.aa_id       as gr_aa_id
   19        , connect_by_root gt.itid_parent as gr_grid
   20        , t_child.aa_id                  as it_aa_id
   21        , t_child.itid                   as it_itid
   22        , t_child.itgt                   as it_itgt
   23     from group_test_reformatted gt
   24          inner join test t_parent on (gt.itid_parent = t_parent.itid)
   25          inner join test t_child on (gt.itid_child = t_child.itid)
   26    where connect_by_isleaf = 1
   27  connect by gt.itid_parent = prior gt.itid_child
   28    start with t_parent.itgt = 'G'
   29    order by gr_grid
   30        , it_itid
   31  /
  
    GR_AA_ID GR_GRID      IT_AA_ID IT_ITID    I
  ---------- ---------- ---------- ---------- -
           1 G1                  1 T1         I
           1 G1                  2 T2         I
           1 G1                  3 T3         I
           1 G1                  4 T4         I
           2 G2                  2 T2         I
           2 G2                  3 T3         I
           2 G2                  4 T4         I
           3 G3                  3 T3         I
           3 G3                  4 T4         I
  
  9 rows selected.
  

  Kind regards
  Rob.

• mask test remotely with 6030 LeCroy oscilloscopes

  Hello everyone!

  For automated testing, I have to use a mask for a road test, seeing the PASS/FAIL result.

  I'm on WM-RCM-E_Rev_D_902208 (manual remote) .pdf but I did not any remote control to control the mask and read the result of test of mask (success or failure).

  If possible, I would like to distance load a mask of the oscilloscope (or directly from the computer), the conditions test and read mask test result.

  There is somewhere a list with these commands? If so would you please send it to me.

  Have you other example/suggestions for me how to do?

  Thank you!

  Hi Nicu,

  Use the VBS command to send the automation for the P/F feature strings, you're wanting access. Are the ranges of automation by running XStream browser; There is a shortcut to this application on the desktop of the scope. XStream browser displays the interface of automation of the scope; Connect to the "local scope" and then navigate to PassFail/Q1. The Q1 level, you will see the global settings. Go to the folder of the operator to see additional details.

  A few examples:

  To specify which file mask:

  VBS ' app. PassFail.Q1.Operator.Filename = "D:\Masks\100BaseT.msk" "

  To configure the condition:

  VBS ' app. PassFail.Q1.Operator.Condition = "AnyOut" "

  Reading the result of Q1:

  VBS? "return = app. PassFail.Q1.Out.Result.Value' (returns-1 for true, 0 for false)

  Proofreading the overall result of P/F

  VBS? "return = app. PassFail.LastPass.Result.Value' (returns-1 for true, 0 for false)

  Do not hesitate to contact me if you have any additional questions.

  Best regards

  Alan