Test environments - samples

Similar Questions

• Dev, Prod, test environments?

  Hi I am new to ODI, I just trained in it. I use the development environment (deposit of development work) for all mappings.

  What is the Production and the test environment? How do you define it?

  How you can migrate from dev to prod and prod then to test?

  Y at - there no specific installation for this? How to configure prod and test environments? It will be very useful if someone clear my doubts!

  Hello.

  These are the steps to create repositories (development or execution)

  Creating repositories with Oracle Data Integrator Studio - 11g Release 1 (11.1.1)

  Pay attention to the TYPE of repository, that you want to create.

  I recommend you to perform the following steps for a basic deployment environment. As you improve with ODI try different configurations.

  (1) a single master repository work for your DEV environment.

  (2) use the same Master repository and create a kind of execution referential work that you will use this as your Test environment.

  (3) create a new repository repositories master and execution in another server and configuration in your PROD environment. It's your safe and you deploy only when everything is working fine. In addition, you will have a regular backup to repository strategy.

  Now just set three new connections in ODI Studio.

  A DEV using information from repository of 1.

  A TST uses 2 repository information.

  One for PROD uses 3 repository information.

  You're good to go. Develop you project in DEV, generate deployment scenarios to test in TCT and if all goes well. Deploy the topology and scenarios needed to PROD.

  Good luck.

  Ponte

• Tour of Flex Tester sample?

  Well, I guess I play stump-the-saddle with the Tour de Flex AIR sample tester. I followed Greg's old instructions on how to

  use it. I see that the tester of the sample, but I don't see where I can place my URL to test a sample application.

  Can someone tell me please how to test using the latest version?

  The tester of the sample is broken.  We have to fix it in the next few weeks (just after Adobe MAX).

  If you want to see what your sample, you can always hand edit the XML file.  Find the file objects - desktop2.xml.  This is a catalog of samples.  You can put your own URL in this file and test.

  NOTE: the file desktop2.xml - objects is replaced a lot of time, we publish a new sample, so your changes will be overwritten at any time.

  If accidentally you break the file, simply delete and re - run Tour de Flex.

  We will soon have a new sample tester.  If you have samples to contribute, please contact me at gwilson (at) adobe com

  Thank you!

  Greg

• In comparing the two last samples read in

  Hey guys,.

  before the start of my program to test a sample, to check whether its current temperature stable

  So, I read the information of my sample temperature very low frequency (once every 5 seconds) and basically I want to compare the last two samples I have read, and if they are the same allow the next part of the program to start.

  I thought that this could involve using the Labview collector function, but I can't see how I would implement it.

  Any help is very appreciated,

  Sam.

  use a registry node or shift of feedback.

  Write the value to the entry of feedback node and compare to the output

• than 25 ns sets sampling rate...

  Hello

  I'm trying to test the sampling rate of chassis cRIO 9103...

  I created a simple FPGA project, for sampling sign this clock frequency of the FPGA equal to 40 Mhz (on by default). I applied 1 Mhz square wave to pin MISO DIO6/SPI, place one of the slots on the frame... I put a tick 'loop timer' in ' ' loop for every moment of picking (totally 32 sampling point).

  input signals a cycle = 1000 ns (1 MHz) and I m planning see samples every 25 ns (40 MHz) on the graphical waveform. But the chart shows me only 10 points for 1 cycle like taking samples of every 100 ns instead of 25ns. (FrontSamplingRateObservation.png)

  What is to be? If so, how can I get faster sampling rate...

  I joined .vi photos of the project...

  You can consider that the only timed cycle lines and the pipeline of the operation.

• Invoke.Query () results in Eception TypeError, says "application" does not exist, even in the sample application

  Hello

  today I'm trying to get strong () public static void blackberry.invoke.query working in my HTML5 application with the last frame bbUI. However, even in the example of community invoke query , it does not in my web Inspector. I always get this: "Eception TypeError: object [object Object] has no method 'query'". "

  With blackberry.invoke.invoke () everything works fine, but I want a list of applications that can call my text, so I need blackberry.invoke.query (). Everyone knows about this problem?

  Thanks in advance for your help.

  Yes BB10, I just tested the sample on the device and it worked, the error just seems to be in the emulator to ripple. Sorry for that. I need to build my own page-selector based on a response to select a what application, or is there something out of the box as in the cascades?

• Overview of the data in environmental assessments through different essbase servers

  Hi all

  
  

  We are on 11.1.2.3 of the EMP. In our EAS Prod, I signed up using my ID AD user and added the two (prod one, a dev) essbase servers on the essbase server list. I was able to add two essbase servers successfully. Now, when I spotted the cube in dev data it gives me the error "cannot connect to the olap service. Unable to connect to the Essbase server. "Error: Essbase Error (1051293): connection fails due to invalid credentials". This may not be true because I wouldn't be able to expand the list of servers essbase and drill down to the database in order to preview if the credentials were wrong. Also I am able to see the contours and Calc scripts very well. I am able to get an overview of the data on the cube prod very well.

  Now, the same thing happens when I try to preview data into essbase cube prod from Dev EAS. Which means can't preview data only on the server dev essbase cubes from dev EAS and when I try to get an overview of the data on a cube of prod from Dev EAS I get the same error of invalid login credentials.

  Could someone please help me understand if this is a bug or if this is how they intended to work? Because we have just upgraded to 11.1.1.4 and we managed to get an overview of the data in any essbase server any EAS service, we used.

  No SSL or Single Sign-on, were used. Only Active Directory credentials. It only happens with an AD ID and not a native directory ID. Please suggest on how this can be fixed.

  Thank you

  Ted.

  I logged this with Oracle and here is their answer copy / pasted

  "

  The problem that you have declared in the RS is a desired behavior. This behaviour was observed in the latest versions, only 11.1.2.x.

  In the previous version we can get an overview of the data for any Essbase server added to any console of regional service.

  But environmental form 11.1.2.x this behavior has been changed.

  We checked with the development on this more team early, and according to the development team, this is a behavior of design.

  As dev environment and Prod environment have different registers, the data preview would work if Dev Essbase server added to the Dev EAS only. as the same is valid for the production or test environments.

  Because same problem has been reported earlier, we train support raised a bug with the development team after the issue of reproduction.

  But the development team did not have this accepted as bug that this behavior is by design.

  Later, we changed this bug at a request of enchantment with the development team to change this behavior.

  Bug 14622693 - OVERVIEW OF THE ESSBASE REMOTE FAILURE HOST DATA when it is CONNECTED TO EAS

  If this improvement asked gets approved by the development team, so it would be integrated in the future release him.

  Thank you

  Ted.

• iSupplier external installation on the Test environment.

  Currently, we use iSupplier and have a DMZ server that we use for our Production environment. We have a need to be able to log on as a supplier when we are on our test boxes without using a server "test DMZ." I changed the POS: external to point to the same URL address internal our address but when I connect as a provider, I get the following error:
  

  The webpage cannot be found
   
   HTTP 404 
  
  Most likely causes:
  •There might be a typing error in the address.
  •If you clicked on a link, it may be out of date.

  The URL on the page fault reads as follows: http://testap1.garlandisd.net:8000/OA_HTML/fndvald.jsp
  
  Is there a way to make the connection work on our internal website for our test environments?
  
  Thank you
  Rob

  What version of apps? and meanwhile, please go through the MOS score.
  What values should be specified for iSupplier profiles POS: POS and external Url: Url internal [266376.1 ID]
  Allow access by outside provider to the user iSupplier Oracle Portal and Oracle Sourcing [308271.1 ID]
  Kind regards

• Cannot rename the samples to the examples in blazeds turnkey

  Installed the turnkey and tested BlazeDS samples. Worked well. Then I renamed the Web application "examples". Nothing works. So I made a double called 'samples' and then BOTH were working. Why? I'm trying to set up my own webapp for RemoteObject invocation. It only works when the Web application 'samples' is deployed. If I move it off webapps no remoteobjects no longer works. I searched for what is before the turnkey installation to require the Web application 'samples', but can't find it. Anyone know?

  BTW, the registered sample dynamically works without the webapp "samples."

  Thanks in advance!

  Yes. You are right. I forgot about it. To run the examples in a different webapp, you must compile the file swf is to use a different root context.

  -Alex

• Theme not copied when using the application creation wizard

  Environment: -.
  Request Express 4.2.1.00.08
  Oracle 11 g Enterprise 2
  Browsers: Firefox, Chrome and IE
  
  Problem: -.
  We store themes standardized in a fictitious application for use in the development of new applications. We no longer seem to be able to copy these themes in an application when you use the create application wizard. A completely different theme is copied to the new application than the one selected in the wizard.
  
  Process: -.
  The steps in the wizard to create an Application are: -.
  Step 1 method - database
  Name of the step 2 - accept default
  Step 3 Pages - accept default values
  Step 4 shared - components check the "copy shared components. Choose an application with several themes in there and let "User Interface issues".
  Step 5 themes of components shared - select a standard theme by default, validate Yes
  Step 6 attributes – accept the default values
  Create the Application.
  
  The copied into the shared components in the new application is theme 26 productivity, not the theme selected in step 5. Productivity 26 theme was not a theme in the original application. In other tested environments, 21 Scarlet has been copied to the new application (even if 21 Scarlet does not exist in the original application).
  
  I can reliable reproduce this in a number of different test and development system, using different browsers. I can reproduce the problem on apex.oracle.com using a sample application as the source application (although if you select theme 25 you will need enable validation off in step 5 theme 25 will not be successful validation due to lack of a model of login page - which seems to be a separate issue).
  
  Is this a problem known elsewhere, is a generic problem in 4.2.1?
  
  Concerning
  
  Paul

  Hi Paul,.

  Thank you for raising this issue. He has already been addressed in development, and is followed with bug * 16607687 *. The fix will be available in our next release, 4.2.2.

  Kind regards
  Hilary

• You have a mobile emulator for Android or iPhone Firefox?

  We are doing some development for mobile applications for mobile devices using different browsers and I was wondering if you have a simulator/emulator, since you have Firefox for users of mobile devices? I would be particularly interested in an emulator that runs on the test environments for the o/s of Windows group.

  Yes, you can download a Firefox for 'emulator' mobile for Windows, Mac or Linux at http://firefox.com/mobile/download/

• Satellite C660 - no playback HD video AVCHD format of sound files

  I just bought this C660 but when I insert my SD card with hd video files saved on JVC Camcorder I couldn't hear a sound of the video played.
  But I test the sample video.

  The video and audio works.
  HD video played was clear but not sound.
  What could be the problem?

  Please suggest if it is necessary to adjust any setting on this laptop.

  Thank you

  Hello

  It seems to be a codec problem.
  Maybe you need a few extra codex if you play these files

  I also recommend checking some different reading tools.
  Clips recorded using test * VLC Player and splash

  I read that Splash is a HD video player. He plays all the clips of camcorder high definition AVCHD/H.264 and movies without any problem and you don't need additional codecs.

• The best way to draw the difference of phase vs. time of two signals

  I have three channels (time, force, displacement) of approximately 1 000 seconds of a sinusoidal test load test data (sampling rate was 100 Hz).  I would draw the difference in phase between the force and displacement (perhaps using a second window 30) according to time.  I tried using a few different analysis functions, but I get what looks like random noise (phase difference between force and displacement is very small and the difference in amplitude is very fantastic - 4 orders of magnitude).  Any suggestion would be appreciated! -Jim

  Hi Jim,.

  The phase channel resulting, that you get with the function FFT DIAdem is in the frequency domain.  If you select a channel data and time in the FFT dialog box, you will get a frequency channel that results as well as the Phase channel resulting.  If you select only a weather channel of waveform data in the FFT dialog box, you will get a Phase of waveform frequency channel resulting.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Migration of DHCP: Old name of the server appears in the console, but OK on server DHCP itself

  Last night, I've migrated our production from 2008 to 2012 R2 DHCP servers. Monitoring the migration pretty well thanks to all of our test environments and PROD so guide. Check the DHCP logs on the new server, everything seems to go OK, but there is a question that we can not understand:

  -In the DHCP console on our desktops, I right click on DHCP for 'add a server... '. »
  -Select the "this authorized DHCP server: ' and I see the new name of the server and the INVESTIGATION period.
  -Now, DHCP in the console, the FORMER name of the server appears under the node.

  I thought enter ADSIedit and change the name of the DHCP server might help, but it didn't.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Microsoft Visual C++ Runtime Library

  Hello

  I'm setting Oracle IPM 7.7 in one of our Test environments. Once the entire broker configuration and reduced servers are up

  We are able to launch th IBPMStartup Sucessfully. But then that the application of the process of the maps using the ProcessBuider, we get the following error:
  Microsoft Visual C++ Runtime Library
  Runtime error!

  Program: E:\PROGRAM FILES\OPTIKA\IPM\BUILDER. EXE

  abnormal termination of the program

  Ok

  What is the problem on this server, its clear that OS related question... How will be solved. Please suggest.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It suits better TechNet. Please post your question in the forum of Forefront Identity Manager 2010.