Test the oracle insert very very slow

Similar Questions

• 12 c (12.1.0.2) of the WHO is very slow

  We are on 12.1.0.2. The navigation is very slow. Does anyone has same issues?

  The reason why I asked because we had the same problem and Oracle had recommended this after patch. You can try this too.

  Patch 14807119 : BUG FOR the PERFORMANCE BUNDLE 1. on PS1 12 c EM (SGD) PATCH

• The display is very slow on the Satellite 1800 412

  I installed Windows XP Professional (do not use the Toshiba installation disc) and since then, the display is very slow refreshing when scrolling. It takes about 30 seconds to scroll one page down in Word for example. I tried to install the latest display driver but the installation block. Installing the driver in safe mode works but the computer hangs at startup and I needed to uninstall the driver. The laptop now seems to use a standard VGA driver of XP.

  Hello

  If you install the operating system from the original Microsoft CD you need drivers Toshiba. These drivers must be installed in the correct order. Is very important to install the driver from chipset to the first common modules and if they are available. Please also check what graphics card you have and install a good driver.

• I found mrtstub.exe on an external drive and the computer is very slow.

  Is the "mrtstub.exe" a virus since I found it on an external drive (in fact, it's on 2 different external drives)?  I didn't get any warnings of Norton scan or Microsoft analysis, but the computer is very slow and sometimes hang up when I try to turn it off.

  mrstub.exe is part of the Microsoft Malicious Software Removal Tool.

  See Question 21 in the FAQ article: http://support.microsoft.com/kb/890830

• Clean up unwanted files, the computer is very slow

  The computer is very slow.  Scan says that junk Files are full.  How to clean unwanted files?

  Hello.

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  And then:

  Just click on the link here:http://www.piriform.com/download select & download it.

  step (1) when finished downloading, click CCleanersetup & run the SETUP & INSTALL IT

  step (2) make a right click on it, click "Open or install" select ok or Yes if asked by the administrator.

  step (3) when you have finished open or run the CCleaner

  full market (4) on the open window of CCleaner, the word "windows" in the upper left corner of the screen, the check box everything except 'THE WIPE FREE SPACE' (leave this box clear)

  Step (5) click on 'applications' (next to windows) & case "alone".

  (6) level in the lower right corner of the window of CCleaner click "run cleaner" a new window will open, and then click ok.

  step (7) when the cleaning is finished, close all files, restart your computer and see if it works!

  If the problem persists, there are more ways to solve this problem!

  PS: Click 'YES' If this was helpful or respond to get help.

  He helped?

• Insert very slow (XE 11g)

  Hello

  I did a new install of 11g XE by default on a Windows 8.1, and I have to spend in its 1.5 GB of data (50 tables) database. A table contains a blob column, and it has 600 k rows; each line has a blob, and the size of each BLOB can range from 1 KB to 100 KB.

  When you insert this table with blobs, it goes very quickly (50 lines can take 1 second or less) until some point in the insertion of these counts, where it begins to be very very slow (50 may take more than 5 seconds).

  If I cancell all the processes (for example in line 150 000), then I start cero by removing all the tables and adding it again, it goes very quickly to line 150 000 and then I'm getting very slow again. It is not a cache issue (I checked to restart the machine). It seems that he compared to the tablespace more, but I can´t find an answer on this point.

  Is there some clues for this?.

  I'm sorry to ask, I'm not an expert of the Oracle.

  Best regards

  Dany

  Are the autoextend datafiles?  You may need to initially create to a large size.

• DVD burner in the new laptop VERY SLOW - PLDS DVD +-RW OF THE - 8A5HH

  I just got a new laptop from Best Buy - Dell Inspiron 3521. There a PLDS DVD +-RW OF THE - 8A5HH drive built in. I tried to burn a data CD, but it failed several times.

  I tried these in the file Explorer and CyberMedia Power2Go Burns, also at the Maximum speed or 24 X. It was using both Philips 52 X speed CDR burning failed at the end, when the burner is trying to close the disc. He couldn't complete a burn speed X 10 (very slow) to Power2Go. File Explorer strangled between 7 X and 10 x to be able to burn and did not show a dialog box saying if the burn is complete or not. He left me guessing.

  It was after a call to Dell technical support and a trip on the Microsoft Support Site to use their CD - RW test online. He said he updated something, but I don't know what.

  I must say it's a disappointment. I think I should have bought a laptop without a burner inside and bought an external burner. At least that way I had have the choice of what I got. This burner is slooowly.

  Anyone have any idea if this can be fixed, or is it just a limitation of the burner is in this laptop? If it is material, well I guess you get what you pay for.

  Dell phone support fixed it. Went to the Microsoft Support website and ran a convenience store of material for DVD players, who suggested the update of the firmware of the player. He did that, and then we went back and burned a disc in the file Explorer and it worked, but only to 10 X I opened Power2Go and burned a disc at 24 X, and it burned successfully. I didn't actually measure the speed (Power2Go shows you that), but it worked well and quickly. I think that the problem was an outdated firmware for the DVD/CD burner. Flashing to the latest firmware fixed the problem.

  I want, I knew that this troubleshooting tool on the Microsoft support site, but now I can not find.

  --

• The program is very slow to start and then when running. Caused by McAfee "Active Protection".

  Win XP Professional operating. TO 38.3.0 with lightning 4.0.3.1

  Since the update of the program, it became initiate very slow and when finally the opening is generally slow, all around. Perform simple tasks like move a file, the program seems to wonder off into outer space. If you try to do anything but the program reports a message "do not reply" up to what he ended up doing ing to the first task. More often or not, he then proposed the following message is displayed.
  "" Script: chrome: / / Script: chrome://messenger/content/mailWindow.js:17messenger/content/mailWindow.js:17 ".

  Anyone got any ideas how to fix this?

  Thanks for the feedback of results

• Firefox 10 - installed and the performance is very slow, unresponsive while trying to load websites.

  Just noticed the other day on my server and it could have been thought Nvidia driver. Update that and same result with Firefox very slow in delay/performance while making the web pages? Downgraded to Firefox 9.0 and problem solved. Return to previous performance levels.

  Just received and installed the update for Firefox worm 10.02 and voila... all the symptoms of the problems I had been able to correct themselves? Always curious what the issue was with my install in Server 2008? Have the latest Firefox installed in Fedora 16-64 bit and works without a problem. I have dual boot this machine between the two O/S once again, thanks to all who offered suggestions or advice about my problems.

• M40-277: the laptop is very slow, during the writing of CD/DVD

  Hello

  I have a problem with my DVD writer. When I try to write a CD or DVD with my laptop, my laptop is very slow, I can barely move my mousepointer and my buffer State maintains have failed (see screenshots). Even when I try to play a CD or DVD it slows down my laptop. I don't know what the problem is. Can someone help me?

  I have this laptop: "Satellite M40-277" with the DVD-RAM UJ - 841S.
  Screenshots:
  http://users.skynet.be/fa027951/s1.jpg
  http://users.skynet.be/fa027951/s2.jpg
  http://users.skynet.be/fa027951/S3.jpg

  Thank you.

  Hi Gianni,

  I use Nero to burn DVDs, and one of the configurable options is the task of "priority". If I set it to 'high' then my phone behaves as you described, that is very slowly. Check if you have you encode/burn too high task priority.

  Kind regards

• New laptop and download the applications is very slow

  Just bought the new laptop is stuck with win8 as the only thing available.  It took 2 days (11 hours) to open the account of ms to get to email.  Now he's just hanging.  Thought to download ms Pinball, game tried, after an hour, it was 8% done, stopped.  This is typical of access to anything on the net.  Pages that came in a second XP now take more than a minute to 8.  Everything is delayed.

  No I've not added anything, have not changed anything, have read the news and played cards.

  Features are so sensitive that happening sites and programs if I place my hand on the keyboard.

  It's horrible, I can get windows XP and remove windows 8?

  Is there a way to make it useful?

  HELP HELP

  Your question is not very clear.

  As long as you have internet connection, Microsoft Account opening should not take more than a few minutes and you can always connect to Windows 8 without Microsoft Account.

  For new PC, first you need to run Windows Update and install all updates. Even if the updates to day will install automatically, but you can do it yourself too.

  If your internet connection is not fast loading, it might be because update is ongoing enforcement and once installed all updates your PC would be quick. I'm not sure what you are referring to the sensitive features but it could be features provided by the manufacturer of your PC and not as in some Windows PC, you can use your mouse pad to open the start screen or scroll down.

  It is NOT recommended to install Windows XP because it is supported and you download the update or support for Windows XP more.

• I downloaded adolbe 10.2 beta verson, now the computer is very slow

  I can't do a system restore, it will leave me to fix the problem

  I can't do a system restore, it will leave me to fix the problem

  Hey pete1946

  You should always be cautious about downloading versions beta what whether they're still testing it

  read this for system restore problems

  If you are using norton it will stop system restore

  read the information in the below link on disable norton product anti-forgery protection

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  Malware will interfere with system restore

  Download and analysis with the free version of malwarebytes anti-malware ther

  http://www.Malwarebytes.org/MBAM.php

  try to restore the system in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  How to use the system restore

  and there is a box to check to see more than 5 days restore points

  read this tutorial

  http://www.windowsvistauserguide.com/system_restore.htm

  Walter, the time zone traveller

• W7 Ent. SP1 x 64 clean install on the new PC - very slow to load after reboot during installation

  Hi all

  I'm busy to install W7 Ent. SP1 x 64 on two computers for a small organization non-profit of my friends, all the similar Assembly (motherboard: ASRock H81M-VG4, CPU: Intel Celeron G1840, transcend SSD). The first PC went perfectly, no problems with the installation at all. Now, I installed the second, but unfortunately the following happens:

  After restarting the installation, was asked to enter the name of the computer normally, and then to set up a password. When I clicked on next (and leaving the word password empty) the whole process seems to freeze a little, and then after a few minutes, I could choose settings updates, after which everything slowed even further. "Finalizing settings" took about three quarters of an hour. Once this done, all slowed even more, and it now displays a black screen telling me that this is not a genuine copy of Windows (had no chance to fill in the key product of course) and after about half an hour he is now "configuration of settings customized for xxxx".

  -EDIT - Windows has begin once (between my opening message and my second post), and it was terribly slow in everything that (like several minutes before opening anything). I installed the LAN driver with the idea of updating all the drivers, but after a reboot it is so late it now already taken 10 minutes to boot Windows (and is suspended in the Welcome screen again).

  I've done an another clean install after using DISKPART to format the SSD, but the same thing is happening again once unfortunately. I installed on a USB bootable, I used to install two other computers as well (one before this one and the other afterwards), and everything is fine with those. Swapping the RAM module for a good known has not changed the situation.

  All comments are welcomed, appreciated, thanks.

  All other essential drivers have been installed: video, Chipset?

  Try the SSD at the other system and see how it starts in the system causes problems.

  Also try the SSD with the painful installation in this computer to see if the problem persists.

  Could contribute to isolate if the SSD.

• my D drive disappeared and the computer is very slow, start is also very slow

  can someone help me in this regard? drive d icon is there, but when I click it, it indicates that the parameter is incorrect.

  Your drive is a single hard drive with two partitions, this is why the manufacturers of HD utility will report only to drive across, apart from the chip you run the detailed test?

• sometimes can not log into the server or very slow to make so.green bar downstairs is fully informed and he's there with the wheel spins as it tries to plug?

  Can't all the time. Many time running without problems. When problems seem not to be like that for a while as an e-mail message. Just did an email and wheel turn and try to send. "Cannot connect to Server" in my opinion, is what happens. Press Cancel, entered Envoy file to see if went thru (sometimes he does this when he says he did not send) not in the folder sent, has started the new email and redone and it sent fine?

  They told looks that the question of thunderbird and no provider?

  My sent file is small. Thought this might help then deleted more old that I did not move from customer records.

  If it does not work at the same time, but working again later, it is unlikely that the problem is with Thunderbird.

  You can try to disable email scanning in your antivirus software.