The display is very slow on the Satellite 1800 412

I installed Windows XP Professional (do not use the Toshiba installation disc) and since then, the display is very slow refreshing when scrolling. It takes about 30 seconds to scroll one page down in Word for example. I tried to install the latest display driver but the installation block. Installing the driver in safe mode works but the computer hangs at startup and I needed to uninstall the driver. The laptop now seems to use a standard VGA driver of XP.

Hello

If you install the operating system from the original Microsoft CD you need drivers Toshiba. These drivers must be installed in the correct order. Is very important to install the driver from chipset to the first common modules and if they are available. Please also check what graphics card you have and install a good driver.

Tags: Toshiba

Similar Questions

  • Problem reading DVD and CD - RW on the Satellite 1800 412

    HI -.

    My laptop has recently stopped playing all DVD and CD - RW - ordinary CD work fine, but when I try to play a DVD or a CD - RW it whirs for a while, then I get the message "Windows cannot read this disk. The disc may be damaged, or it could be in a form that is not compatible with Windows.

    I use a Satellite 1800-412, Windows XP (home edition) Service Pack 2, and the DVD drive is a SD-C2502.

    I watched the updates of the firmware of my drive to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home as this is often recommended for problems of this kind on this forum - but not all are available.

    Any suggestions?

    Thanks much :-)

    Hello

    I read on some sites that doesn't update the firmware solves this problem.
    I recommend you to remove the drive from Device Manager.
    After restarting again the operating system should recognize the drive again. Perhaps this procedure will help you solve this problem.

    Concerning

  • Help to find the driver for Satellite 1800 412

    Friendly day time dear administrators of a forum and participants, help find the driver for toshiba broadcast s1800-412, in advance thank you.

    If there is a possibility to send on an email [email protected]

    Hello

    He's a guy of the user forum to ;)
    If you want to accept that a notice of a simply common Toshiba laptop user then got to this site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

    Choose the Archive Satellite Archive Satellite 18 *-Satellite 1800 412

    Enjoy ;)

  • Model number of Board of Directors system satellite 1800 412

    What is the model number of Board of Directors of satellite 1800 412 system?

    Hello

    I found this page.
    http://www.sparepartswarehouse.com/DeviceType-vendor-modelline-modelseries-partList.aspx?DeviceType=0&vendorlevel=ModelSeries & modelseriescatid = 51077 & partcatid = 140747 & filter = 2

    You will find different tips for Satellite 1800. It is not a Satellite 1800 412, but I think it should also work.
    But the best way is to contact the Toshiba authorized service partner in your country. You can order the compatible card of these guys here, and you can be sure it's a good advice.

  • FIFA 13 game very slow on my Satellite L750D

    Hello

    I use * toshiba satellite L750D * (8-32 bit windows).
    His works well. But yesterday, I install fifa 13 but its very slow.

    My game graphics ratting is 5.8.
    Graphic desktop is 4.3 ratting.
    Calculation of ratting processor by 3.7 second and I play fifa 13 in my laptop.
    RAM: 6 GB
    Processor: amd - one 450 APU 1.65 GHz dual core

    hepl me like...

    Post edited by: tamim_1

    Post edited by: tamim_1

    Don t know how to help you maybe material s notebook isn t good enough for Fifa 13.
    It s the new game so perhaps should be better material.

  • Failed to create the floppy disk to update the BIOS on the Satellite 1800-712

    I was given a Satellite 1800 712 with buggy BIOS (power went down while flashing) then now when the laptop is on a sign shows
    BIOS (Block2) is damaged! (Call the repairman)
    and so on...

    I downloaded the latest bios for the laptop, but when I try to follow the instructions given (unzip, insert a formatted 1.44 MB floppy, run the *.exe file and a 1.44 MB must be created) nothing happens. When I run the exe (chgbiosa.exe) if I am running windows xp nothing happens and if I'm running BACK said "initial mistake.

    In the Archives of the bios is a readme. It says that I need to copy files (BIOFC72T.COM and CHGBIOSA. (EXE) on a 1.44 MB diskette. Well, it is not helped either.

    Any ideas what should I do? Thanks in advance.

    Hello

    I found this thread in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19801&MessageID=72625

    The case described in the thread above is very similar to your question.
    According to this message that every newer BIOS has a protection mechanism which means that even in the case of an incomplete process of flashing, the area responsible for in the BIOS flash for the upgrade is never deleted.

    Generally you should contact the service point in your country for this problem, but perhaps the description in the other thread will help you.
    But you know, everything you do is at you own risk

  • On the Satellite 1800-921 black screen problem

    Hello
    My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
    It's a bit worrying!
    Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
    Thank you
    Nancy :)

    Hello

    to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

    To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

    Goodbye, TOK

  • Problem with a hard disk on the Satellite 1800 750

    Hi all!

    I have problems with my Satellite 1800 750 therefore than the hard drive not to be recognized. Means I can start from floppy disk or CD-ROM, but not hard drive. I create in the hard drive to another laptop and it works well. In the BIOS, I see two (HD and CDROM) IDE devices. From pure DOS diskette and try running fdisk also does not show me the HD.
    What can be? It is a total mistake on card mother IDE #1 have a defect or is it a BIOS problem? Or something else?

    Thanks in advance for any ideas.

    Kind regards
    Werner

    Hi Werner,.

    He cannn be your IDE controller has a loose contact.

    But in a first time, you must set the BIOS to the factory settings. Press ESC key after power! Then you have a short list of commands at the bottom of the screen!

    If this does not solve the problem you correctly a hardware fault. This should be checked by a Toshiba Service partner. Go to https://eu.computers.toshiba-europe.com - support & downloads - find an authorized Service partner

    Rudi Bye

  • Upgrades memory for Satellite 1800 412

    HI -.

    I have a 1800-412 Satellite which becomes very slow so I intend to upgrade the memory. I've been hunting around a few different sites to see what I can buy, and there seem to be differing opinions whose memory actually fits my laptop:

    Site Web of Kingston said that I'm going to need their KTT-SO100/256
    .. .but another site suggested the KTT-S0815/256

    Both websites claim that this is the chip that works.

    I have also looked on the Toshiba site and found the part PA3069U - 1 M 25 number is the one I'm looking for, but the chips I found for sale online recommended for my laptop have different numbers for Toshiba...

    Help! I'm confused!
    What exactly should I buy? There are actually several different chips that work or are some of these sites try to sell me a bad?

    Thanks for your help,

    Morag

    Hello

    I found the information that your device can handle with 1 024 MB max memory compatible Module is PC100 256 MB (PA3069U - 1 M 25). This module has been tested and it will be recognized correctly.

    I recommend you to use the right and tested a title less expensive but maybe not tested one.

  • Satellite 1800-412/battery/screen? problem...

    Hello
    Sorry for the English, I will try to explain my prob
    I have a 1800-412 2 years old (out of warranty) and now big problems with the display when I'm working on it:
    Evry time I turn on the laptop, the screen flashes and nothing shows up except when I press the little button at the top right (this one is pulled down when I close the screen). Then the screen lights up for 5 or 10 seconds and new Moul. In fact, I can see the screen, but it seems that there is no brightness... It is very very bland out (?)...
    This problem seems to appear less often when I work only with battery full power, but is still there.
    I updated the bios 2-10 and updated display driver too.
    But nothing changes.
    Question: is this battery problem screen problem, bios issue...
    Thanks for the tips, I don't know what to do, and it is impossible to work now with this computer.
    someone has an idea of what I need to do?

    Thank you

    Hi frakk,.

    I think that there is a problem with the FL inverter connector pins. Take your distributor to service, they can fix.

    Good bye

  • Display light goes off on the Satellite 1800 750

    Hello together,

    I have long been the problem, that the lighting of the screen out constantly.

    By pressing the pencil with him he can press the display is turned off if a laptop broke a stop with that short that activate the new lighting display.

    But now nothing more goes, too!

    However, we can see on the screen what is indicated that only lighting is absent!

    What can we do there?

    I belonged the reverser often breaks and that you exchange it only necessary what do you say about that?

    Help me please!

    Thanks a lot a lot!

    Affectionately yours!

    JMK!

    Hey JMK

    Before that you're wasting your time here why you n t contact the Service of your country partner and explain the situation. I'm sure they can give you more information on the parts and prices.

    Also check eBay. From time to time you can find parts or defective. These units are not expencive and with two defective, you can make one that works.

  • How to increase the memory shared on the Satellite 1800-700

    Hello

    I upgraded the memory on this computer to 512 MB some time ago and I was wondering if there is a way to increase the amount of shared memory that uses 8 MB graphics card?

    I'm using xubuntu 6.10 and I find it pretty slow. I hope to increase the video memory helps.

    Thank you
    satelliteman

    Hello

    The upgrade of Ram maximum is good idea and I think that the performance of the laptop will be much better than before.

    Back to shared memory. As far as I know shared memory works automatically and there is no way to change it manually. More RAM unit allows use more of it for the chart. I'm afraid there is not much to do.

  • I need remove the guide of the Satellite 1800-100

    Hello
    My laptop Toshiba S1800-100 need battery replaced CMOS, I am wary of die battery because today I discovered that the time of Windows is back about 15 days today, however my laptop has no battery, battery died and only the AC power feeds but it was unplugged for a long time because I was away for a long time.

    Yes, is there a guide step by step disassemble S1800-100 or where can I get a?

    I also expect advice on techniques for CMOS battery change as I am senstive to research disassemble the guide to avoid damaging the mobo.

    Thank you...

    Hello

    The CMOS battery swap is quite complicated, and the laptop has to be disassembled. Maintenance manual is not a public document and I do not think that you will be able to find it for download.

    Only thing I found is to follow link http://www.irisvista.com/tech/laptops/Toshiba1800/satellite1800_1.htm

    Please check it out, but if you try to do something you do at your own risk.

    Good luck!

  • Shortcut keys work only not on Satellite 1800

    Hello

    just started place & my 3 quick access keys work! entered in the "toshiba controls", "internet" & "outlook" are assigned to the keys 1 & 2 but nothing happens when you press. clues? I have re-installed the driver controls by but once again not good
    deploy the satellite 1800-412.
    curious...

    Hello

    First of all, you should check if the buttons are selected. (Is selected)
    Then check if the option has been selected for the simple buttons.

    Very important is the installation of the common modules. Without this additional demand it possible s Toshiba controls will not work.
    You must install first the common modules, then the controls.

  • the CPU activity increased to 100% so easy... Satellite 1800 - 752S

    I have the Satellite 1800 - 752S with 40GB HD, 384 MB of RAM.
    Processor: X 86 Family 6 Model 8 Stepping 10.

    Problem: when I try to read a music with Winamp file or a video file with windows media player, the CPU activity is 100% if easy and computer becomes very slow. Audio does not play fluent and the video does not appear correctly.
    Also when I try to watch a movie with a DivX Player DivX.

    I tried with several antivirus, registry cleaners, spyware programs and anti-adaware to clean your PC of possible viruses, Trojans, worms, etc., but after cleaning I still get the same problem.

    What do you recommend I do?

    Thank you very much.

    Hello

    What operating system do you use? It is the original installation Toshiba or did you build this platform of operating system by yourself?
    On some models of 1800 there is no XP driver for the videochip. In case you have one of these models and you are using Windows XP, it is possible that the performance is bad when you play everything.

    BR

    Tom

Maybe you are looking for

  • some problems in vibe lenovo shot after update

    Vibe Lenovo shot after update to 6.0.1 -When I open the VIDEO program opens file manager program. -The USIM toolkit does not -The battery was quickly released.

  • TravelMate B113 - M BIOS version is newer than the available downloads

    I have an Acer Travelmate B113-M. My BIOS has gone bad and is stuck at the loading screen with press to access the configuration. F2 does nothing, but by pressing the ESC key gives me more information. Insyde H2O EFI 3.7Coyright (c) 1983-2012 Insyde

  • My Photosmart C3180 all-in-one will not scan.

    Get Installation error 8, [(8,0,0)], then press the 'OK' button to continue. Complete installation - printer OK, but not scan. Have tried all the options within the "error of Installation of the HP" without success. "HP solutions Center - 'guide' giv

  • Browser in the application window.

    Hi all I tried to open a browser page using "navigate to a URL (www.google.com)", but it will open a new page in web browser.»» But is it possible to open a Web browser in a window of the application itself. How is it possible. Please can someone sug

  • Some components missing CUCM sauvegardΘ after you have changed the IP address of a Subscriber

    a strange problem with cucm backup... After we migrated the cucm one taken sub. from one place to another and changed the ip address, some components were not in the backup, including TFTP Backup successfully(100%) finishing, but when we check some f