Text flow problem

Similar Questions

• IDML text flow problem

  I use CC and my client is on CS5, they have been affected by a problem with the IDML files that I and my colleague (CS6) provide. Most of the text is placed exactly the same my INDD, but every once in a while, there is text that is in the wrong place, pushed to the next page by a Word, or sometimes as much as a paragraph.

  The rest, all objects, links, text, styles... everything else is fine. It's just a weird text overflow thing happening on the apparently random pages.

  I tried everything I can think of. It is not a conflict of policies. It is not a conflict of preferences. It is not a conflict basleine.

  Anyone have any ideas as to what might happen, I would be very happy!

  and Yes, I told them that they must update, as I've spelled, Upgrayedd, D extra, of course, for a double dose of pandering.

  Normal and expected behavior. The text engine changes from one version

  to the other.

• Reference text flow problem.

  My problem is that the notes split and then the rest of the document will not appear in the text frame.  There are many references and many of them have since long (more than 2 pages).  I have fixed the minimum space to. 125 "and allow Split verified reference.  If I do the text block more the following sentence will pull and the the great divide has disappeared.  Any ideas on how to get the following sentence to shoot in?

  

  It would also be that there is a reference in the following paragraph text that should be on the next page, because the text to accompany it would not be able to adapt to this page, so he bumped to the next page.

• Text flow problem (CS5)

  Hello

  I'm a fitness booklet and trouble with the text stream with blocks of text on some pages only.

  When to adjust the text block so that the text moves to the next page (i.e. at the end of a paragraph, or to avoid leaving a single line at the bottom of a page), it also picks up the last line of the previous paragraph and it throws on the following page.

  I can't understand why. Happens only on a few pages and I don't know what the difference is between these pages, and the rest is to know why it does.

  Can anyone help?

  Thanks in advance...

  You have "Keep with previous" turned on in the paragraphs on these pages?

  Avoiding a last line on the next page is easier with 'line to keep together. You can find both in the 'Keep options' in the menu section.  In addition, I find it easier to score a point with "start in the following image. Do not touch the frameworks in this way.

• Flow/text formatting problem

  I have a document with text flowing on multiple columns and pages. Sometimes when I change the format of a subtitle or something similar, the text disappears from there on. I turned off the constraint on the baseline grid and sometimes it works and other times it doesn't. What is the cause and what can do about it?

  See if any of your paragraph styles have "Keep with next paragraph" it turned on or keep all options are applied to all.

  To see if this is the case check to keep Options paragraph Styles or select text that happens on press CMD-CTRL + ALT + K

  Sometimes if a line spills onto the following line options Keep might say a piece of text that is larger than the text block to keep together.

• Error: Text flow inconsistency in text U10174 breakpoint 960px

  Hello, after the last update ist here the error (error: inconsistent text flow in the block of text U10174 breakpoint 960px) to everything I do. The program will be closed.

  Can anyone help? Newinstall doesn´t solve the problem.

  Regards, martin

  Hola Beatriz

  The provisional respond (available Adobe Muse CC 2015.2):

  1 Abra el diálogo cuadro "edición > Ortografia > dictionary del usuario.

  2 Haga click in el boton "Hecho" con las using shift + command (Mac) o Shift + Ctrl (Windows) to stays presionada.

  (Soluciona incompatibilidad, pero el formato text Esto para rotura puntos to be haber perdido)

  3 Abra 'MuseLog.txt' archivo vidéoconférence "documents."

  4. messages como Espera "fixed text model inconsistency in the block of text with the text... page... to the impossible...» »

  5. in Adobe Muse, volver a manualmente el formato text apply para text / especificados in estos messages rotura puntos

  Abhishek

• Text flow create a delay when an overflow creates a new page, which prevents you from reading the page number, in error

  Hi all!

  I create a script to automatically generate a catalogue of photos; the idea is to prepare a master document with a text block in the master full of self flowing, then insert images with their legend by the script, let the system automatically creates the following pages when necessary, by a single stream of text.

  My catalog is divided into sections, each represented by a different master spread; So I know what page I work when the script put there a picture just to link the current page in the master spread appropriate.

  To simplify what I got most of my script here, using text instead of images:

  / * load a master document, only containing a block of empty text in the master spread, connected to the main text stream * /

  var doc = app.open (new File("~/Desktop/mySampleDoc.indd"));

  / * I'm working on the story, thinking that every time that the textframe of first page will be full, we will create another block of text on the next page (automatically created) * /

  var history = doc.pages [0] .textFrames [0] .parentStory;

  / * now, I put a few lines of text in history, pending the creation of a new on the first page will be complete * /

  for (var i = 0; i < 100; i ++) {}

  / * This is the following line: * /.

  .silence story.insertionPoints [-1] = "This is line n." + i + "\r";

  / * here, I want to know what page is the line just created (the error is generated here just in the creation of the new page + block of text) */

  Thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset;

  / * and now I print the page number * /.

  story.insertionPoints.item(-1).contents = "current page:"+ thispage + "\r"; ".

  }

  The big problem is: when the first block of text is full and overflow is generated, a new page with a new block of text from the main text flow (as the master spread) is generated. but it seems my script requests the page number before the new page with the new text block is born and an error is given.

  It seems that the script goes too fast regarding the creation of the new page.

  If I remove the line thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset; everything is ok.

  I tried to introduce a delay up to 3 seconds with no effect.

  I tried also to view or zoom in the request of page number, thought new page to force the system to wait for the page is truly born, also without effect (by the way, I wasn't able to view the page in adding the script of the text!).

  Can someone help me?

  A big thank you to everyone

  Roberto

  Have you tried using myDoc.recompose () before the application for compensation?

• data flow problem, queuing Subvi primary VI

  Ive stuck on a very simple data flow problem here, I would like to convey the data queued in the Subvi and dequeue in the main loop of the vi consumer. Ive attached the vi, since im already stuck on this problem, I was hoping I could learn a few things, especially implementation action engine in this situation

  Thank you.

  Your Subvi makes no sense since your loop will always leave after the first iteration and you always initialize your counter to 0 whenever run you it. This is a problem.

  Your code also suffers from several places that are made by the queue data. You will get undeterministic behavior since you do not know which dequeue will get the first data. In general, for a producer/consumer using the architecture queued one or more loops loops should be given enqueueing to the queue. A single loop must be made of data. These loops shuold run in parallel to each other. In your code, you can only run your Subvi whenever you press the Start button and as said you will always show the value 1 to the queue. What you need to do, is to have your Subvi managed independently once it is started. Use "Start Asychronous CAll" to start your Subvi when the Start button is pressed then let it just run. Have it post the meter to the queue. Your lower loop in main VI should remove the values and display them. You need not wait in this lower loop since it is the purpose of the dequeue. This loop will be inactive if there is no current data and run only when the data is in the queue.

  In the upper loop of your VI main remove the dequeue and the queue. You don't need them as the Subvi is all that is necessary to validate the data in the queue.

  Try this:

  

  

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Edition of text flowing out of field.

  Hi guys,.

  IM using a customEdit field, in which the edit field will be 3/4 of the screen width and I used EditField.NO_NEWLINE to height of restict to editField to a single line. Inorder to get the scrolling effect I set at the HorizontalFieldManager with horizontalScroll style.

  When im text input English it works fine. But when im dealing with Arabic text, as the script starts to the right of the editField, the text flows in the editField that must take place when the field is filled with comletely.

  I have some pictures... .but im not able to download...

  Answer as soon as possible.

  Thanks & best regards,

  Sree Harsha

  Hello

  I got the soln... I put the DrawStyle.Right for EditField style that worked... but I did not understand why Field.Field_Right did not work...

  Thank you best regards &,.

  Sree Harsha.P

• The text flow inconsistency bug - what to do when workaround does not work?

  Hello

  I am severely touched by the "Inconsistent text flow" bug, which threatens to force me out of business, because all my sites are produced in the Muse. I can't update my sites - the bug strike immediately and Muse stops.

  The message looks like this, but the references are always different (different textbox and different reference breakpoint):

  

  I tried the workaround solution described in the Adobe's Forum thread: Muse-P error incompatible a number of children through breakpoints in text U199116 [was: Muse has encountered an error]

  but without success. The bug is still strangleing that my business - and now my clients is growing very impatient.

  If I understand correctly, the bug was introduced with the last update of Muse. Why don't remember you this update and offers the opportunity to reinstall the previous version in good health?

  A very quick response will be appreciated.

  Thank you

  Sten

  I was forwarded to the Adobe technician who asked my MUSE-file. After a day, he responded with this:

  Please select the block of text you want to change and raises questions, in the 320 breakpoint. On the text block right-click > copy text formatting to > all breakpoints.

  I have now finished testing the solution - and it works. But it removes all formatting of specific breakpoint, then you will need to go through the process of formatting, once more.

  In fact, I recommend Adobe to address the initial fault base, so the bug never shows its ugly face again.

  But thanks for the advice, which brings me back in business.

• Error: Text flow inconsistency in text U12530 768 px breakpoint '

  I get this error only when to download on the FTP host. My web site downloads successfully but I still have this error that is displayed right after the transfer is complete. I don't get the error when I export to HTML... any ideas?

  See the solutions in these messages to the forum and let us know if they helped him. Use the button to translate into positions to translate into English when necessary.

  Error: Text flow inconsistency in text U10174 breakpoint 960px

  Muse-P error incompatible a number of children through breakpoints in text U199116 [was: Muse has encountered an error]

  Error with incompatible children in all breakpoints

  Thank you

  Preran

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• Text rendering problem ADE 2.0

  I am using ADE 1.7 with EPUB on my PC. Yesterday I updated to 2.0, but it seems to have some sort of a text display problem.

  http://i.imgur.com/ZihT8.PNG

  As you can see, the text has a kind of a resolution problem.

  When I adjust the size of the window, the text seems to change with him too, change it with each pixel pixel-clutter I move border group. Justified text or an alignment, it is not serious, nor the size of the font, I choose in ADE (best appearance larger sizes of fonts, but they still have that problem). Cover photos are so pixelated.

  It seems that if it resizes each line or something.

  I have an ATI HD5670 video card, with the most recent driver if that helps. The desktop resolution is set to 1440 x 900.

  Any tips? What could be the problem?

  Geeeeez, I thought about it.

  The text looks pixelated when sidebar is open on the left (for example, the table of contents). When I close it and that the text occupies the entire window, then it is legible and perfect. I didn't even try to close, because in 1.7.2 I opened it all the time and accustomed to it.

  Then when I open the sidebar, it is not just to reduce size of the text box as he should, but trying to resize instead, then the text gets pixelated and crushed. At least that's my theory.

  I hope that this bug is corrected in the future.

• Can I insert image into the existing identity document and make the text flow around it?

  I now get text properly formatted in InDesign CS4.  Is it possible for me to add pictures to this already existing document and that the text automatically adjust to autour flow of these images comes to be inserted?

  Thank you

  Just use File > place command to add your photos. Edition > clear all before do you.

  After you have placed your images, select them using the Selection (black arrow) tool, choose window > text wrapping and text wrap. After that, the text flows around this image when you take on the top of the text.