Text only no projection in the Flash IDE

Similar Questions

• In the Flash IDE, how can I scale the contents of a symbol without their appearance throughout the FLA?

  In the Flash IDE, I would like to scale the content of a symbol and then conversely fits a all instances of the chronology of this symbol.

  We have animations that were created to double the size of the size of the intended end-use. Of course, we can reduce bodies to 50%, but this isn't what we want to do. And here's why.

  Our use case for these animations means assign some of the contents of the symbols for performance reasons bitmap data. If we simply reduce the instances, the bitmap content is always twice as large as necessary.

  Yes, just make the symbols that only contain a bitmap image.

  Another tip, your bitmap image is either going to be recorded in the middle or top left. If it's in the Middle, you can select, Panel convert 50%, convert to bitmap, transform Panel 200%. If it is registered in the upper left corner (not sure how this would happen!), it is best to use the properties panel to the half of the width/height, convert to bitmap, set a height double width.

  Either way, in the case where you didn't know that, in one of these fields of property you can do math. Do not sit there work on which half of something is mentally, or in what position of x, it would be if it was 1234 pixels to the right. You can go on the ground and add: "/ 2" for example and all width was, it's now half that. Similarly, for the x position, you can add "1234" after the existing x value, to move that many on the right.

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• Using SWCs created in the Flash IDE as RSL?

  Hi all, not sure of the best way to address the issue.

  I work with a pure Actionscript project in FB4. I have a lot of work in the UI created in the Flash IDE. I compile them all in a SWC and then add the code for them by extending them with another class, for example:

  (in art.swc, generated by art. FLA)

  assets. Foo_display extends Sprite

  (in the main project)

  class Foo extends Foo_display

  {

  Add the behavior of code here

  }

  Now, this works very well as long as I include art.swc as a normal library (i.e. "merged into code" in the project properties). However, what I really want is for art.swc to be an RSL that I dynamically load. However, FB4 don't mark the CFC as a repetitive stress, as an "external library.

  It's all nice and good - I know how to manually load the art.swf when running. However, here is a problem: my main project (which compiled into main.swf) contains a definition of class that depends on the Foo_display. When I run main.swf I get a VerifyError because (I think) Foo_display is not loaded in the ApplicationDomain yet. Shit!

  So, should I write a preloader to load art.swf before I even think about running main.swf? The goal here was to delay load art.swf for a little while. I don't know much about RSL, but I feel that they do not have this restriction (i.e. the player will go forward and check the swf file and let you worry about the actual code to load before using it). Is this true?

  Interesting side-note: the auditor seems not to care about instances of classes, just trees of heritage. So in main.swf, I can create instances of Foo_display all I want and the system is not complain until I loaded art.swf into the current ApplicationDomain before I do. However, if I have the classes that inherit from Foo_display - BAM, VerifyError. Anyone know why this is?

  RSL receive no special treatment of the player. I think the VerifyError missing dependencies of legacy, is part of the virtual machine and is described here in Chapter 3, http://www.adobe.com/devnet/actionscript/articles/avm2overview.pdf.

  -Darrell

• my cc to photoshop updated to 2014.2.0 in text only mode can type the top case. can not lowercase

  my cc to photoshop updated to 2014.2.0 in text only mode can type the top case. can not lowercase

  my windows 7 pro 64-bit

  someone had this case? and help

  Thank you

  Check the character Panel. Is "all caps" (TT) on?

  

• Incorrect display of lines not put across the 9-slice symbols inside the Flash IDE of CC

  Hello everyone.

  I found a problem with the Flash IDE of CC. It shows lines not put across the 9-slice symbols incorrectly inside his IDE (However the final result published is correct). The source and example files can be downloaded here: http://cdn.dmldevelopment.com/plugins/tests/incorrect_work_with_scaling_in_Flash_CC.zip you can compare 2 screenshots in the archive: look_inside_Flash_CC_IDE. JPG and look_inside_Flash_CS4_IDE. JPG and you will easily understand that wrong.

  Will be waiting for the resolution from Adobe on this point. Hopefully they'll fix it soon as this question always takes the extra of our developers time when we try to make perfect pixel patterns.

  Hi Infeter,

  There is another solution to workaround if you do not use thin strokes.

  Change your original symbol - select the shape - Goto Menu - change form - convert lines to fills.

  After that make sure you adjust the width and height of the PI you like and you're good to go!

  And on your old applications, you should be able to follow the same link and please try to provide as much detail as possible while making your requests.

  Kind regards

  Mabrouk

• Am I the only one annoyed by the flashing "start with Lightroom Mobile" in Lightroom?

  Any time, I move the cursor to the upper left of the Lightroom work screen, to export an image or open another catalog, white 'Get started with Lightroom Mobile' text flashes quickly on the screen in a way that suggests, to me, a cheap on a Web page advertising mobile.  I bought access to Lightroom, and I think it's lame that Adobe should use such a method to get out their products to users.  If I buy the Mobile with Lightroom, this mean that whenever I try to close the program or perform another mundane task, that "Get Started with Lightroom for Mac/Win!" starts flashing on the screen?  And why stop there, Adobe?  It is an advertising space now, so feel free to create a ticker for your new products and services and good, why no time, too?

  I'm sure it's only a continuation of the slow creep of advertising into every moment of life, and I have, on the one hand, say thank you Adobe!  I certainly do not get enough of that already!

  If you don't want to see, click on the menu just drop down to the right of the view and choose one of the options to turn it off. I don't remember what it is, but you can disable mobile Lightroom. It's your choice.

• Create a worker in the flash IDE?

  I'm trying to generate a swf of Flash CC worker.

  When I try to compile using AIR 13 for android:

  var wtm:MessageChannel = Worker.current.getSharedProperty ("wtm");

  WTM. Send ('test');

  Runtime::ContentPlayer/loadInitialContent()

  Runtime::ContentPlayer/playRawContent()

  Runtime::ContentPlayer/playContent()

  Runtime::AppRunner/run()

  to ADLAppEntry / run)

  overall / runtime::ADLEntry()

  Is it possible to publish a SWF of worker of the IDE?

  This guy here (make sure that the name is correct):

  

  In your way of Flash CC\Players\Debug crush FlashPlayerDebugger.exe. This is what is used when you press CTRL + SHIFT + ENTER.

  Plugins and ActiveX controls are special Flash Player plugins for browsers that crash the base for you plugin allow to debug a web project (SWF embedded in HTML). It's totally different.

  Edit:

  Updated my own just for posterity. Avion13 and FP13... And it displays correct:

  FP:

  

  AIR TRANSPORT:

  

• or should the bug of the Flash IDE?

  I noticed that there is a system of flash player, Flexbugs, etc.: https://bugs.adobe.com/

  But I do not see an entry 'IDE Flash' or ' Flash CS3/4/5 "in this system... ' It's a "shame", because it would be

  • do not lose time to report a bug already reported,
  • help find workaround solutions,
    
  • contribute to improve the next version...

  So, where if the bug be mailed?

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Translators edition text only in the InDesign documents?

  Our Department are catalogs etc. in different languages in InDesign CS6. Today, our translators work in InDesign, but heard that it should be possible with some kind of product to access the layer of text only, for example while the translators did not need to learn InDesign, does not require licensed InDesign and cannot spoil layout etc. No idea what this product could be?

  InCopy may be what you are looking for!

  
  

  -Dov

• Change the size of the text only does not work

  Font size standard on most of the Windows I have open in Windows 8 is a 5 or 6. I'm in front of my computer, 6 to 8 hours per day (teacher online), and it's the single most annoying problem that I have ever met.  "Change the size of the text only ' on my display settings page is grey - there is no solution.  Can I change the size of everything, that gives me giant icons, but the text on all the windows is still tiny.

  I hope someone has a useful suggestion. Please don't tell me to go to "Change the size of text only." This is the function that does not work.
  My Windows 8 was purchased in January - part of the Microsoft $! 5 offer to people who bought computers between October and December of last year. The installation went fairly well, but I had this problem of fonts since then.  ASUS computer laptop, Intel core I7, good resolution, good speed, ideal machine, except that Windows has me squint all that day, seven days a week.
  Thank you and best regards, all
  Reggie Audibert

  Font size standard on most of the Windows I have open in Windows 8 is a 5 or 6. I'm in front of my computer, 6 to 8 hours per day (teacher online), and it's the single most annoying problem that I have ever met.  "Change the size of the text only ' on my display settings page is grey - there is no solution.  Can I change the size of everything, that gives me giant icons, but the text on all the windows is still tiny.

  I hope someone has a useful suggestion. Please don't tell me to go to "Change the size of text only." This is the function that does not work.

  My Windows 8 was purchased in January - part of the Microsoft $! 5 offer to people who bought computers between October and December of last year. The installation went fairly well, but I had this problem of fonts since then.  ASUS computer laptop, Intel core I7, good resolution, good speed, ideal machine, except that Windows has me squint all that day, seven days a week.

  Thank you and best regards, all

  Reggie Audibert

  Hi Reggie

  The option "Change only the size of the text" applies only to the text for the following items.

  Title bars

  Menus

  Message boxes

  Titles of palette

  Text of the icon

  ToolTips

  What you need to do is select the link "Custom resizing options" directly above the option "Change only the text size.

  In the dialog box move the cursor in the rule box, hold down the left button of the mouse and drag the rule. If the size is 100%, try to start with it to 125%.

  Click OK, and then apply. You will be asked to disconnect / connect to before the change takes effect.

  If 125% does not for you try to bump the size up one another 10% gradually until you are satisfied.

  Let us know if it works for you.

  Concerning

• Flash IDE components in Design Mode of Flex 3. Can they be visible here?

  Hello

  IM Explorer Flex to get a grip on its concepts and am currently looking into building components in the Flash IDE. Although I suppose that its likely that when you are more familiar with Flex you produce your components in Flex, as I said Im exploring its concepts and would like to know where and how the IDE Flash fits into the work.

  I made a simple component Flex in the Flex IDE, which shows well, when I run the Flex project. But it does not show in Flex Design Mode.

  I exported the Flash as a SWC component and added the SWC to the Flex library path. The symbol in the Flash IDE extends UIMovieClip. Now, I read in 'to using Adobe FlexBuilder 3"(p.67) that the Flex components Panel lists only visible components, according to literature"components that extend UIComponent.

  Note that my question is to be visible on the stage in Design Mode, and not in the components Panel. As UIMovieClip does not inherit from UIComponent (and the UIComponent class does not seem to be available in the Flash IDE), is also the cause that the component of the IDE Flash is not visible on the stage of Flex in Design Mode?

  Can someone confirm or deny this?

  Kind regards

  Marcel

  Hello

  For the IDE flex component, it works only if its a MXML component. It's that it would render in Design view 'stage' if it's a MXML component.

  If it is an actionscript class, it must be available as a library in the porject so that it can be rendered in DV.

  If the component you are trying is an actionscript class, please try to move it to a library and use it in your project to see it in DV.

  In FlashBuilder 4, we support made of UIMovieClip objects that are in the library (SWC) and added to the project build path.

  Kind regards

  Out straggler

• Running multiple instances of Flash IDE CS (6)

  I have a build machine compile my fla files by running Flash.exe command line and providing a JSFL file as a parameter. I want to run multiple instances of the IDE Flash to enable simultaneous generations on this machine otherwise it only one thread running on a build machine that is a waste of resources.

  So, is it possible to run multiple instances of the Flash IDE? Perhaps there is some sort of command line? I have Flash CS6, but there should not be a lot of differences with CC, isn't it?

  I don't think that you can run multiple instances of flash CS6 and CC.

  -Reynaud

• HOW TO SELECT FONTS IN Microsoft generic/text only printer

  Hello

  How can I change the font of TEXT ONLY printer by using the tab selection of police under the PROPERTIES MENU in xp?

  Thank you.

  Please be patient and wait for the answers in your original thread...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/set-the-font-of-generic-text-only-printer-as/6c96f5e4-845f-4935-9105-b22cbb684c38

• Impossible to open or import .swf flash IDE CC

  Hello, since I installed flash CC yesterday, I am unable to import the .swf file into my .fla or .swf file that is opened in the flash IDE. Extension SWF is not even in the list of supported files (I did all this normally CS6 and before). When I try to open the swf file in flash (because I got some assets into swf and need to change it and put it in the fla format) it says something like "one or more files were imported not because he had problems to read." Should I reinstall new CC flash or any other suggestion please? Thank you

  Maybe you can install the CS6 of the trial from the product page and then sign in with your ID of cloud? It has worked for me before when I had to re - install. After installed it should ask if you want a trial or licensed, connect to license and it should work again, I hope. You may need to update CS6 after through the cc Manager.

  Adobe should have a complete list of features dropped to read in one place before the update. It s very bad customer management not. But wise to all previous updates of Flash I keep all versions, forever, if possible.