or should the bug of the Flash IDE?

Similar Questions

• Incorrect display of lines not put across the 9-slice symbols inside the Flash IDE of CC

  Hello everyone.

  I found a problem with the Flash IDE of CC. It shows lines not put across the 9-slice symbols incorrectly inside his IDE (However the final result published is correct). The source and example files can be downloaded here: http://cdn.dmldevelopment.com/plugins/tests/incorrect_work_with_scaling_in_Flash_CC.zip you can compare 2 screenshots in the archive: look_inside_Flash_CC_IDE. JPG and look_inside_Flash_CS4_IDE. JPG and you will easily understand that wrong.

  Will be waiting for the resolution from Adobe on this point. Hopefully they'll fix it soon as this question always takes the extra of our developers time when we try to make perfect pixel patterns.

  Hi Infeter,

  There is another solution to workaround if you do not use thin strokes.

  Change your original symbol - select the shape - Goto Menu - change form - convert lines to fills.

  After that make sure you adjust the width and height of the PI you like and you're good to go!

  And on your old applications, you should be able to follow the same link and please try to provide as much detail as possible while making your requests.

  Kind regards

  Mabrouk

• Using SWCs created in the Flash IDE as RSL?

  Hi all, not sure of the best way to address the issue.

  I work with a pure Actionscript project in FB4. I have a lot of work in the UI created in the Flash IDE. I compile them all in a SWC and then add the code for them by extending them with another class, for example:

  (in art.swc, generated by art. FLA)

  assets. Foo_display extends Sprite

  (in the main project)

  class Foo extends Foo_display

  {

  Add the behavior of code here

  }

  Now, this works very well as long as I include art.swc as a normal library (i.e. "merged into code" in the project properties). However, what I really want is for art.swc to be an RSL that I dynamically load. However, FB4 don't mark the CFC as a repetitive stress, as an "external library.

  It's all nice and good - I know how to manually load the art.swf when running. However, here is a problem: my main project (which compiled into main.swf) contains a definition of class that depends on the Foo_display. When I run main.swf I get a VerifyError because (I think) Foo_display is not loaded in the ApplicationDomain yet. Shit!

  So, should I write a preloader to load art.swf before I even think about running main.swf? The goal here was to delay load art.swf for a little while. I don't know much about RSL, but I feel that they do not have this restriction (i.e. the player will go forward and check the swf file and let you worry about the actual code to load before using it). Is this true?

  Interesting side-note: the auditor seems not to care about instances of classes, just trees of heritage. So in main.swf, I can create instances of Foo_display all I want and the system is not complain until I loaded art.swf into the current ApplicationDomain before I do. However, if I have the classes that inherit from Foo_display - BAM, VerifyError. Anyone know why this is?

  RSL receive no special treatment of the player. I think the VerifyError missing dependencies of legacy, is part of the virtual machine and is described here in Chapter 3, http://www.adobe.com/devnet/actionscript/articles/avm2overview.pdf.

  -Darrell

• In the Flash IDE, how can I scale the contents of a symbol without their appearance throughout the FLA?

  In the Flash IDE, I would like to scale the content of a symbol and then conversely fits a all instances of the chronology of this symbol.

  We have animations that were created to double the size of the size of the intended end-use. Of course, we can reduce bodies to 50%, but this isn't what we want to do. And here's why.

  Our use case for these animations means assign some of the contents of the symbols for performance reasons bitmap data. If we simply reduce the instances, the bitmap content is always twice as large as necessary.

  Yes, just make the symbols that only contain a bitmap image.

  Another tip, your bitmap image is either going to be recorded in the middle or top left. If it's in the Middle, you can select, Panel convert 50%, convert to bitmap, transform Panel 200%. If it is registered in the upper left corner (not sure how this would happen!), it is best to use the properties panel to the half of the width/height, convert to bitmap, set a height double width.

  Either way, in the case where you didn't know that, in one of these fields of property you can do math. Do not sit there work on which half of something is mentally, or in what position of x, it would be if it was 1234 pixels to the right. You can go on the ground and add: "/ 2" for example and all width was, it's now half that. Similarly, for the x position, you can add "1234" after the existing x value, to move that many on the right.

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• Create a worker in the flash IDE?

  I'm trying to generate a swf of Flash CC worker.

  When I try to compile using AIR 13 for android:

  var wtm:MessageChannel = Worker.current.getSharedProperty ("wtm");

  WTM. Send ('test');

  Runtime::ContentPlayer/loadInitialContent()

  Runtime::ContentPlayer/playRawContent()

  Runtime::ContentPlayer/playContent()

  Runtime::AppRunner/run()

  to ADLAppEntry / run)

  overall / runtime::ADLEntry()

  Is it possible to publish a SWF of worker of the IDE?

  This guy here (make sure that the name is correct):

  

  In your way of Flash CC\Players\Debug crush FlashPlayerDebugger.exe. This is what is used when you press CTRL + SHIFT + ENTER.

  Plugins and ActiveX controls are special Flash Player plugins for browsers that crash the base for you plugin allow to debug a web project (SWF embedded in HTML). It's totally different.

  Edit:

  Updated my own just for posterity. Avion13 and FP13... And it displays correct:

  FP:

  

  AIR TRANSPORT:

  

• Text only no projection in the Flash IDE

  It happens all of a sudden today. Same problem throughout all my project files and versions of Flash (CS5.5 and 6). I use classic text fields. Is not question that they are static and dynamic, incorporated, or different options of anti-aliasing. They show only a text field with nothing in it, even if there is text in there. Text shows when I change the font Arial (device font?).

  List of fonts in the IDE to take account of what I have in my folder of fonts, but most of them don't show anything. I also tried delete and reinstall the font. It was fine yesterday. Only difference was today an update of Windows. Help!

  * edit

  I did several tests, looks like new fonts, I added after installation of Windows do not work

  Flash CS5.5 + CS6

  Windows 7 home 64-bit

  or just uninstall this update: http://support.microsoft.com/kb/2753842

• Running multiple instances of Flash IDE CS (6)

  I have a build machine compile my fla files by running Flash.exe command line and providing a JSFL file as a parameter. I want to run multiple instances of the IDE Flash to enable simultaneous generations on this machine otherwise it only one thread running on a build machine that is a waste of resources.

  So, is it possible to run multiple instances of the Flash IDE? Perhaps there is some sort of command line? I have Flash CS6, but there should not be a lot of differences with CC, isn't it?

  I don't think that you can run multiple instances of flash CS6 and CC.

  -Reynaud

• Impossible to open or import .swf flash IDE CC

  Hello, since I installed flash CC yesterday, I am unable to import the .swf file into my .fla or .swf file that is opened in the flash IDE. Extension SWF is not even in the list of supported files (I did all this normally CS6 and before). When I try to open the swf file in flash (because I got some assets into swf and need to change it and put it in the fla format) it says something like "one or more files were imported not because he had problems to read." Should I reinstall new CC flash or any other suggestion please? Thank you

  Maybe you can install the CS6 of the trial from the product page and then sign in with your ID of cloud? It has worked for me before when I had to re - install. After installed it should ask if you want a trial or licensed, connect to license and it should work again, I hope. You may need to update CS6 after through the cc Manager.

  Adobe should have a complete list of features dropped to read in one place before the update. It s very bad customer management not. But wise to all previous updates of Flash I keep all versions, forever, if possible.

• Flash IDE components in Design Mode of Flex 3. Can they be visible here?

  Hello

  IM Explorer Flex to get a grip on its concepts and am currently looking into building components in the Flash IDE. Although I suppose that its likely that when you are more familiar with Flex you produce your components in Flex, as I said Im exploring its concepts and would like to know where and how the IDE Flash fits into the work.

  I made a simple component Flex in the Flex IDE, which shows well, when I run the Flex project. But it does not show in Flex Design Mode.

  I exported the Flash as a SWC component and added the SWC to the Flex library path. The symbol in the Flash IDE extends UIMovieClip. Now, I read in 'to using Adobe FlexBuilder 3"(p.67) that the Flex components Panel lists only visible components, according to literature"components that extend UIComponent.

  Note that my question is to be visible on the stage in Design Mode, and not in the components Panel. As UIMovieClip does not inherit from UIComponent (and the UIComponent class does not seem to be available in the Flash IDE), is also the cause that the component of the IDE Flash is not visible on the stage of Flex in Design Mode?

  Can someone confirm or deny this?

  Kind regards

  Marcel

  Hello

  For the IDE flex component, it works only if its a MXML component. It's that it would render in Design view 'stage' if it's a MXML component.

  If it is an actionscript class, it must be available as a library in the porject so that it can be rendered in DV.

  If the component you are trying is an actionscript class, please try to move it to a library and use it in your project to see it in DV.

  In FlashBuilder 4, we support made of UIMovieClip objects that are in the library (SWC) and added to the project build path.

  Kind regards

  Out straggler

• What should I do to avoid 'flash loading' then the incorporation of video to PDF?

  I can integrate video h.264 to PDF via acrobat pro or inDesign.

  However, there is always a moment of waiting, flashes color background Acrobat

  until the film is finally loaded and played back.

  I have seen tutorials where this does not occur,

  but no predictable difference in what I do.

  Any ideas how to avoid this behavior that occurs however I embed the video.

  Second problem: when I play the video of mebedded in the size of the presentation

  so, he gets stuck in the slide. You have to hit the arrow button several times

  until at some point happening in fact to a random slide below the presentation.

  My computer is very powerful and I use the most recent CC InDesign and Acrobat XI.

  I have read all the help and I do what Adobe said I should do.

  Is it possible that Adobe cannot just treat the video to PDF on a professional level?

  Tips on how to make this look right is appreciated!

  The best

  Stefan

  Whenever a Rich Media Annotation is manipulated, Acrobat/Reader should load the Flash Player extension, unpack the data video/SWF and drop overall. As a 32-bit application that involves a lot of much processor juggling resources is not uncommon to wait one or two seconds. There is a similar pause when the extension is disabled. It depends on what size are the assets, if he executes several at the same time, etc., but there is no way to avoid it.

• PC HP Compaq 8200 Elite MT: Should I roll back before flashing the BIOS?

  Hello, I am trying to determine if the update of the BIOS shown on your website is right for my machine: HP Compaq 8200 Elite MT PC. After selecting 'Let HP find my products,' he identified my machine and sent me to a page that asked me to 'Select language driver and OS' two squares. I selected my language, then going on to the next box that asked me to choose my operating system. However, it does include all the Windows 10 selections. I used to have initially Windows 7 Professional. However, I've recently upgraded to Windows Professional 10. Is it safe select the operating system Windows 7 Professional, even if I is no longer on the machine? You see, I want to update BIOS, because I'm having trouble starting after I install memory upgrades, and the provider of the RAM is recommended to upgrade to the latest version of BIOS upgrade before installing the upgrade of RAM, to eliminate these problems. I don't want to make a mistake, and then select the wrong BIOS update. There is an update of the BIOS on HP.com for my MoBo machine, but only for Windows 7 Pro. So should I go back to 7 Pro, before the update?  Please, inform me as to what I should do.

  Hello:

  I just got the flash drive, I use to update BIOS on my HP business desktop PC.

  I plugged in my dc7800 CMT W10 also running.

  The window on the flash drive, and I closed it.

  Then I went on the desktop, click on this PC, click with the right button on the flash drive, which is drive E:\ in my case.

  Then I chose the Format from the menu, and a box will open.

  In the file system drop-down list that I get on my USB flash drive, I get the following options:

  FAT (by default) which is what you want to use.

  NTFS

  FAT32

  exFAT

  So if you don't see these options, try another flash drive.

• Firefox crashes every time at this moment I have activate the flash plugin. I uninstalled and installed a plugin once again without any positive result. What should do?

  Firefox crashes every time when I activate a flash plugin. It started today after an automatic attempt to update shockwave. I uninstalled flash and installed again. Always the same story. There is no previous version of flash available on the adobe site. What should do?

  In the menu do help-> Check For Updates and follow the instructions to get 3.6.6 who will stop the Flash blocking Firefox.

• What should I do when I receive the message 'unable to load the flash shockwave.

  What should I do when I receive the message 'unable to load the flash shockwave.

  Hello

   
  1. how many times you get this error message? This problem is limited to specific Web pages?

  2. Once you get this error message? What is your default browser?

  
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using
  
  3. have you installed new hardware or software before the show?

  4. What is the operating system installed on the computer?

   
  5. are you logged in as administrator?
   
  
  Method 1:
  If you are facing problems with Internet Explorer 9, I suggest you read the article and try to run theFix it:
  Troubleshoot Internet Explorer to IE quick, safe and stable
  http://support.Microsoft.com/GP/pc_ie_start
  Note: Note that the reset Internet Explorer (IE) resets all settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
  Method 2:
   
  a. search for Internet Explorer in the start menu.
   
  b. right click and select "Run as Administrator".
   
  Check if the problem occurs.
   
   
  Method 3: Uninstall and reinstall Adobe Shockwave
   
  To uninstall a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  
  I also suggest you to download and install the latest version of Adobe Shockwave player and check if that helps:
  
  http://get.Adobe.com/Shockwave/
  Provide more information about the issue so that we can better help you.
   
  I hope this helps.

• Blocking the Flash player module applications OSX 10.9.2; Firefox SafeMode (28.0) did not help. Re-installed Flash, rebooted, no luck. Any ideas?

  Flash has stopped working the same day where Norton anti-virus [version 10.6 (26)] has pointed out, "blocked." "(attaque Web: Angler Exploit kit Flash Télécharger 4)" I guess that means that the malicious software was not installed; so perhaps only a coincidence.

  The youtube HTML5 video referenced on the Mozilla site, "Amazing Roger Federer trickshot on Gillette ad shoot", works very well. The non-HTML5 version says the flash player crashed. Game site, bubbleshooter.com no longer works.

  Convenience store plugin installed. I tried Firefox Safe mode, no help. Safari browser has flash player crash. Cannot find out how to disable hardware acceleration, because the player never appears in the browser so that I can right-click on it.

  Any help with this would be appreciated!

  Hello

  Recently upgrade Flash 12-13?
  
  There have been problems reported with the 13.0.0.182 version of the Flash plugin crashing on some old Mac computers by the compiler to generate incompatible codes.

  The only way to recover is to uninstall the version of Flash 13 and return to an older version of Flash and wait for Adobe to release an update that resolves this problem.

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Mac-OS.html

  You can install the latest version of Flash 11.7 has the latest security updates (does not work with Safari) or the latest version of Flash 12 who did not get updates of security Flash 13A.

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

  Adobe Community: ATTENTION CLIENTS MAC - Flash Player 13 'Plugin Failure' workaround:

  • http://forums.Adobe.com/thread/1447282