Using SWCs created in the Flash IDE as RSL?

Similar Questions

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• In the Flash IDE, how can I scale the contents of a symbol without their appearance throughout the FLA?

  In the Flash IDE, I would like to scale the content of a symbol and then conversely fits a all instances of the chronology of this symbol.

  We have animations that were created to double the size of the size of the intended end-use. Of course, we can reduce bodies to 50%, but this isn't what we want to do. And here's why.

  Our use case for these animations means assign some of the contents of the symbols for performance reasons bitmap data. If we simply reduce the instances, the bitmap content is always twice as large as necessary.

  Yes, just make the symbols that only contain a bitmap image.

  Another tip, your bitmap image is either going to be recorded in the middle or top left. If it's in the Middle, you can select, Panel convert 50%, convert to bitmap, transform Panel 200%. If it is registered in the upper left corner (not sure how this would happen!), it is best to use the properties panel to the half of the width/height, convert to bitmap, set a height double width.

  Either way, in the case where you didn't know that, in one of these fields of property you can do math. Do not sit there work on which half of something is mentally, or in what position of x, it would be if it was 1234 pixels to the right. You can go on the ground and add: "/ 2" for example and all width was, it's now half that. Similarly, for the x position, you can add "1234" after the existing x value, to move that many on the right.

• Incorrect display of lines not put across the 9-slice symbols inside the Flash IDE of CC

  Hello everyone.

  I found a problem with the Flash IDE of CC. It shows lines not put across the 9-slice symbols incorrectly inside his IDE (However the final result published is correct). The source and example files can be downloaded here: http://cdn.dmldevelopment.com/plugins/tests/incorrect_work_with_scaling_in_Flash_CC.zip you can compare 2 screenshots in the archive: look_inside_Flash_CC_IDE. JPG and look_inside_Flash_CS4_IDE. JPG and you will easily understand that wrong.

  Will be waiting for the resolution from Adobe on this point. Hopefully they'll fix it soon as this question always takes the extra of our developers time when we try to make perfect pixel patterns.

  Hi Infeter,

  There is another solution to workaround if you do not use thin strokes.

  Change your original symbol - select the shape - Goto Menu - change form - convert lines to fills.

  After that make sure you adjust the width and height of the PI you like and you're good to go!

  And on your old applications, you should be able to follow the same link and please try to provide as much detail as possible while making your requests.

  Kind regards

  Mabrouk

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• The use of JavaScript in the Flash script and createJS, trouble, referencing the element on the stage

  Hello

  Relatively new to JavaScript, so don't know if it's too complicated to remove in the Flash timeline. I have a question on the stage with the name of the instance "myBox". I'm trying to take it to the coordinate x of a touch on the iPad. The JS looks like this

  / * js

  document.addEventListener ('touchmove', Function {}

  Event.preventDefault ();

  touch var = e.touches [0];

  this.myBox.x = touch.pageX;

  (}, false);

  */

  Is it possible to "myBox" from inside the function of reference? this.myBox does not work when I publish Toolbox for createJS. I am able to get the coordinate x of the key event when I try to alert (touch.pageX);

  Thanks for the help!

  you lose the scope of this function.  Try:

  / * js

  function moveBox (obj) {}

  obj.x = 600;

  }

  moveBox (this.myBox);

  */

  or, more generally, you can pass a reference to "this":

  / * js

  var tl = this;

  function moveBox (obj) {}

  obj.myBox.x = 600;

  }

  moveBox (tl);

  */

  p.s. Please check the useful/correct.

• Create a worker in the flash IDE?

  I'm trying to generate a swf of Flash CC worker.

  When I try to compile using AIR 13 for android:

  var wtm:MessageChannel = Worker.current.getSharedProperty ("wtm");

  WTM. Send ('test');

  Runtime::ContentPlayer/loadInitialContent()

  Runtime::ContentPlayer/playRawContent()

  Runtime::ContentPlayer/playContent()

  Runtime::AppRunner/run()

  to ADLAppEntry / run)

  overall / runtime::ADLEntry()

  Is it possible to publish a SWF of worker of the IDE?

  This guy here (make sure that the name is correct):

  

  In your way of Flash CC\Players\Debug crush FlashPlayerDebugger.exe. This is what is used when you press CTRL + SHIFT + ENTER.

  Plugins and ActiveX controls are special Flash Player plugins for browsers that crash the base for you plugin allow to debug a web project (SWF embedded in HTML). It's totally different.

  Edit:

  Updated my own just for posterity. Avion13 and FP13... And it displays correct:

  FP:

  

  AIR TRANSPORT:

  

• Text only no projection in the Flash IDE

  It happens all of a sudden today. Same problem throughout all my project files and versions of Flash (CS5.5 and 6). I use classic text fields. Is not question that they are static and dynamic, incorporated, or different options of anti-aliasing. They show only a text field with nothing in it, even if there is text in there. Text shows when I change the font Arial (device font?).

  List of fonts in the IDE to take account of what I have in my folder of fonts, but most of them don't show anything. I also tried delete and reinstall the font. It was fine yesterday. Only difference was today an update of Windows. Help!

  * edit

  I did several tests, looks like new fonts, I added after installation of Windows do not work

  Flash CS5.5 + CS6

  Windows 7 home 64-bit

  or just uninstall this update: http://support.microsoft.com/kb/2753842

• How to use fonts created in the library?

  Hi guys.

  I created one police in my library et named GillSans and Assembly is with class: GillSans.

  How do I change the font from extfield t t ype " " text Imput ' using the police in the library?

  Thank you.

  You instantiate the police and use it to the TextField. For example:

  var font:Font = new GillSans(); // instantiate the font
  
  var inputText:TextField = new TextField();
  with(inputText){
      ...
      type = TextFieldType.INPUT;
      embedFonts = true; // embed font
      defaultTextFormat = new TextFormat(font.fontName, 12, 0); // set the font in the TextFormat
  }
  addChild(inputText);
  

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• or should the bug of the Flash IDE?

  I noticed that there is a system of flash player, Flexbugs, etc.: https://bugs.adobe.com/

  But I do not see an entry 'IDE Flash' or ' Flash CS3/4/5 "in this system... ' It's a "shame", because it would be

  • do not lose time to report a bug already reported,
  • help find workaround solutions,
    
  • contribute to improve the next version...

  So, where if the bug be mailed?

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Flash IDE components in Design Mode of Flex 3. Can they be visible here?

  Hello

  IM Explorer Flex to get a grip on its concepts and am currently looking into building components in the Flash IDE. Although I suppose that its likely that when you are more familiar with Flex you produce your components in Flex, as I said Im exploring its concepts and would like to know where and how the IDE Flash fits into the work.

  I made a simple component Flex in the Flex IDE, which shows well, when I run the Flex project. But it does not show in Flex Design Mode.

  I exported the Flash as a SWC component and added the SWC to the Flex library path. The symbol in the Flash IDE extends UIMovieClip. Now, I read in 'to using Adobe FlexBuilder 3"(p.67) that the Flex components Panel lists only visible components, according to literature"components that extend UIComponent.

  Note that my question is to be visible on the stage in Design Mode, and not in the components Panel. As UIMovieClip does not inherit from UIComponent (and the UIComponent class does not seem to be available in the Flash IDE), is also the cause that the component of the IDE Flash is not visible on the stage of Flex in Design Mode?

  Can someone confirm or deny this?

  Kind regards

  Marcel

  Hello

  For the IDE flex component, it works only if its a MXML component. It's that it would render in Design view 'stage' if it's a MXML component.

  If it is an actionscript class, it must be available as a library in the porject so that it can be rendered in DV.

  If the component you are trying is an actionscript class, please try to move it to a library and use it in your project to see it in DV.

  In FlashBuilder 4, we support made of UIMovieClip objects that are in the library (SWC) and added to the project build path.

  Kind regards

  Out straggler

• Running multiple instances of Flash IDE CS (6)

  I have a build machine compile my fla files by running Flash.exe command line and providing a JSFL file as a parameter. I want to run multiple instances of the IDE Flash to enable simultaneous generations on this machine otherwise it only one thread running on a build machine that is a waste of resources.

  So, is it possible to run multiple instances of the Flash IDE? Perhaps there is some sort of command line? I have Flash CS6, but there should not be a lot of differences with CC, isn't it?

  I don't think that you can run multiple instances of flash CS6 and CC.

  -Reynaud

• Impossible to open or import .swf flash IDE CC

  Hello, since I installed flash CC yesterday, I am unable to import the .swf file into my .fla or .swf file that is opened in the flash IDE. Extension SWF is not even in the list of supported files (I did all this normally CS6 and before). When I try to open the swf file in flash (because I got some assets into swf and need to change it and put it in the fla format) it says something like "one or more files were imported not because he had problems to read." Should I reinstall new CC flash or any other suggestion please? Thank you

  Maybe you can install the CS6 of the trial from the product page and then sign in with your ID of cloud? It has worked for me before when I had to re - install. After installed it should ask if you want a trial or licensed, connect to license and it should work again, I hope. You may need to update CS6 after through the cc Manager.

  Adobe should have a complete list of features dropped to read in one place before the update. It s very bad customer management not. But wise to all previous updates of Flash I keep all versions, forever, if possible.

• Cannot use ReadyBoost, the flash player (caches cannot be created)

  I tried to use ReadyBoost to add 1902 MB memory for my Toshiba Laptop.When I hit apply it began counting can stop and displays this message:

  Cache creation failed

  Failed to create the cache. The system cannot find the specified file.

  Not every flash drive can be used with ReadyBoost.  You must make sure that the flash drive is ReadyBoost compatible.

• Use the flash drive for the paging file

  Hello. I would like to use a USB flash drive for the file rather than the HARD disk to increase performance on an older system. I've set up to use the flash player and the system restarts. But whenever I check, it uses the HARD drive. Why doesn't the setting?

  Hello. OK, well I got what I was doing wrong. I never put the c: for not having a swap file.

  http://www.ehow.com/how_6054256_use-USB-memory-RAM-XP.html

  @greenestguy

  Swap file cannot be larger than 4 GB, so no need for a 8 GB flash drive. Save some $$.

  Don't know why it would be a bad idea because MS have programmed it in Vista and Win 7 as ReadyBoost. I suppose there is always the chance that I don't see any difference on the old hardware, but I do not see how it would break anything.