that windows has a scan to check the drivers that need to update
My d AND E DRIVES do NOT WORK AND I thought THAT perhaps IT IS THE DRIVERS of DISC WHO need update. SO IF WINDOWS CAN SCAN MY COMPUTER FOR ME I UPDATE DRIVERS DRIVE MT? CAN HELP YOU.
Hi bobdunford,
Indeed, Windows provides a utility for a quick check and download/install updates.
This is a ride on the how to use it:
http://www.update.Microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us
hope this helps,
Eddie B.
Tags: Windows
Similar Questions
-
ENVY 15-AH151sa laptop: Guard for lack of HP Scan of my PC (to check the drivers)
I had to download a driver this morning. I was able to pick the one I wanted and it worked. As I was on the help screen, I thought I would check if any other drivers needed to be updated.
I get this:
Is there a problem with this process? Should I please?
New Envy 15-AH151sa
More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10Taffy, I got what you ask.
Want to see what other drivers need to be updated. You do not mention that one that you have already installed but.
You have installed the HP Scan to see if your drivers are all up to date, but the analysis fails every time.
Well, join the club. She does it for me too.
The driver HP scanner is bug sometimes and does not always work correctly.
It recognizes some of my products, like the bad model and fails.
You can check the drivers manually but... as the saying goes, ""If it isn't broken, don't fix it".
If your new windows 10 laptop is not working properly, won't change anything.
You did that you need to update, so that a specific matter that fixed you. You're good to go.
This applies in particular to the Bios. Do not update that unless you really have a problem.
Windows 10 will automatically update as needed in most of the other pilots.
Maybe it's not the opinion that you were missing, but I hope that it will offer some relief to determine if you need to update everything.
BTW: The HP Support does not monitor this forum. It is operated peer (volunteer)
Most of us is not employees of HP.
Thank you
-
Related to: pilot - hunt down a bad driver to behave.
Good evening to all!
I tried to check the drivers on my PC after a large number of BSOD and my use of pilot check utility resulted in a HUGE file that makes no sense (to me anyway).
Can someone help me out? Does make sense to anyone?
Here is the file
https://onedrive.live.com/redir?RESID=8d3f436a45192b45! 126 & authkey =! APJUkELvmCuxVPI & ithint = the file % 2cDMP
IF
This full dmp has no active auditor. What were the results when you typed check/query?
You should configure you computer for a small image, as described in this wiki
Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at hereIf you have any questions regarding the procedure, please ask
This phenomenon was linked to the corruption of memory and circumstantial evidence that the culprit was Malwarebytes.
I activate the Auditor, remove the MMFA and use MSE in place at least for test
http://www.Microsoft.com/security_essentials/
I would also like to run a file system check
Please run a check of system files (SFC) & DISM if you're on win 8 or higherAll instructions are in our Wiki article below...
If you have any questions please ask us for .
-
An internal build error has occurred. Please check the error log.
All of a sudden today while working on a project, I got this error message in the issues window:
"An internal build error has occurred. Please check the error log. »
The background in the my application has been configured for white, now even that returns to the default gray
Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
Thank youAfter a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem.
Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back.
http://tech.groups.Yahoo.com/group/flexcoders/message/69312
http://tech.groups.Yahoo.com/group/flexcoders/message/68604
http://tech.groups.Yahoo.com/group/flexcoders/message/62112
http://tech.groups.Yahoo.com/group/flexcoders/message/61840
http://tech.groups.Yahoo.com/group/flexcoders/message/57573
-
Back to Windows 7. Where to find the drivers
I just bought a new laptop for my wife. I guess that, more correctly, she had for a few months now. His old laptop died and she thought she could live with Win8. She could not. She now wants windows 7 on his laptop. If she's not happy, nobody's happy and she's not happy. HP itself isn't helping their stand seems to be that the isOS of material too advanced for decent OS w. I believe that BS. There must be a way to get the drivers to get the abomination his system off. I really need help. She is a teacher and all the documents of her classroom and on-line documents on his laptop computer. I'm getting earfuls of tales of how many extra clicks it takes to do anything. I had hoped his laptop and mine would be the last two long enough for MS to come to their senses and give us a usable OS, but that ship has sailed. Save my sanity and my marriage. Help me to find drivers.
Windows 8 could be a success if MS listened to comments during the development phase.
No one I know wanted to get rid of the W7-type interface.
Very well if they wanted to have the new interface of tile, so there was an option to check a box and let W8 display and behave like W7, and those with tablet PC or touch screen computers laptops/computers office could use the tiles, etc.
I find heavy W8 going backward to find stuff. Anyway, we can go on and on this subject and it will not change Microsoft's mind.
Here are links to the drivers you need. Please make your set of W8 recovery disks or install W7 on another hard drive. The recovery partition probably does not work after installing W7.
You will need to go into the BIOS and enable the legacy mode and disable secure startup (if legacy mode don't automatically disable secure boot).
After that you get installed W7.
First install the AMD chipset driver and restart. First listed file is what you need.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
Then all the W7 x 64 drivers of this model should also work on your.
USE NOT ALL BIOS FILES
If you do not find a driver, please click the device and view the ID of the hardware for it.
If you don't know where to find the hardware ID, please see the info on the link below.
-
I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?
I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?
Hello
It seems that the latest HP published for this model scanner drivers were for Windows XP.
Software & Driver Downloads Scanner HP Scanjet 3400C - HP customer service:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=61835&task=&
You can check in the HP Forums for other users who may have solved that problem.
HP Support Forum - HP Support Forum: http://h30434.www3.hp.com/
24/7 Online supports for the House and special products of HP:
http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&lang=en&product=top
Concerning
-
my computer can't find the drivers, I need my network
Hello, my computer can not find the drivers I need my network. I bought a wifi key today so that I can use internet.
Hello
1. what exactly happens when you try to connect to the Internet?
2. you get any error message?
I suggest to follow the steps provided and we update on the State of the question.
Method 1: Wi - Fi and in Windows network connection issues:
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsHow can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Check out the link for more information:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-InternetFor all windows questions do not hesitate to contact us and we will be happy to help you.
-
Satellite P20 S303: I can't get the drivers I need
Today, I had serious problems, reinstalling Windows XP on my P20 S303.
I used a normal windows cd and I can't get the drivers I need, although I downloaded almoost everzthing there on the support page...The following devices still do not work:
Network controller
SM Bus controller
(USB) Universal Serial Bus controller
Video controller (VGA Compatible)Please help me
Nikolaus EmmerI put t understand what is the problem.
For me it of all clear.
You need good pilots!1.) chipset utility
Graphic driver 2).
3.) driver LAN / WLan driver?
4 SD host controller.)Everything is placed on the page of Toshiba
PS: the first installation of the chipset. It's important!
-
A message came that said, Windows detected another computer with the same IP address. "... or similar message to one, that could just be the functioning of the laptop for the wireless?
MurrayJoe:
> Mean someone has or may have access to my PC or laptop?
You mentioned a wireless laptop. Do you get this message at home (when your laptop is in communication with your own wireless router), or that you get this message when in a public hotspot?
If at home, then I would be not too concerned (what security options enabled in your home router?).
If you get the message while using a public access point, this does not necessarily your computer has been hacked... but it is a warning that you should not ignore. In general, I would not go to any site that has my financial data, or any other sensitive data, a public hotspot. There are too many ways that a public hotspot may be compromised.
Your original post said that "a message came that said, Windows detected another computer with the same IP address.
There are several reasons this could happen... some innocent people and some not so innocent.
If your network is configured for the most common way, then your router uses a feature called Dynamic Host Configuration Protocol (DHCP). You can read about DHCP here...
http://en.Wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol
Basically, when a device on your home network needs an IP address, he asks your router and your router assigns an IP address... technically, "rents" the router address for a given period (one day). Once this period has elapsed, the device must 'renew lease'.
DHCP stops you from the hassle of having to assign a static IP address to each device on your network and then don't forget to retrieve that meet if/when a device are removed from your network.
Sometimes the process DHCP can be confused and assign the same address on multiple devices. If/when this happens, communication between devices on your home network may be confused. Windows is smart enough to detect that another device on your home network has the same address as the computer where Windows is currently running..., but Windows can not solve the problem.
You can determine the IP address of the computer that is running Windows (and posted the message you saw)... by entering "ipconfig" (without the quotation marks) at a command line prompt. Then you can check the IP addresses of all devices on your network until you find the other devices with the same IP address. Then you could say either every device to get a new IP address of the router (or restart the device). Alternatively, you can try just stating the computer that is running Windows to get a new IP address (by first entering "ipconfig/release" then "ipconfig / renew" in the command-line invite him... all orders without the quotes).
But since you said that you are not very tech savvy, my first suggestion was the easiest... just shut everything in your network, and then restart one at a time by starting with your ISP device, router, and other devices. If the problem persists after that, then more troubleshooting (as described in the previous paragraph) would be necessary.
I hope this helps to clarify the issue for you. If you have any questions, please post them and I'll try to answer.
-
Firefox 38 changed the behavior of the tab for me so that each window with two tabs open. The second tab is the 'plus' sign for the creation of new tabs. This means that when the window is closed, the content disappears, but the window to grab and must be closed by hand.
I tried the "Hide Tab Bar with a tab" extension, but it does nothing. My additional windows are always open with the tab bar (which they don't have in previous versions) and two tabs are there.
I "warn me if I try to close multiple tabs" together. I don't know if that's the problem. If this is the case, I don't want to give it up because it's useful. When I have several tabs. But a window that has one thing that he really needs to behave like a window that has one thing in it.
unkilbeeg said
Firefox 38 changed the behavior of the tab for me so that each window with two tabs open. The second tab is the 'plus' sign for the creation of new tabs. This means that when the window is closed, the content disappears, but the window to grab and must be closed by hand.
I tried the "Hide Tab Bar with a tab" extension, but it does nothing. My additional windows are always open with the tab bar (which they don't have in previous versions) and two tabs are there.
I "warn me if I try to close multiple tabs" together. I don't know if that's the problem. If this is the case, I don't want to give it up because it's useful. When I have several tabs. But a window that has one thing that he really needs to behave like a window that has one thing in it.
I crossed by disabling the extensions, and the extension of ImageTweak seems to have been the culprit. It was apparently works well with the previous version, 38 he screwed up. Well, not an extension is critical.
-
Windows has encountered a problem with the DVD/CD on Qosmio G20
has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
can someone tell me what is happening.
Thank youOn this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.
If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.
Good bye
-
I have a Windows XP Home Edition with a breath main card computer. Replaced the Board, PS and other items. Then re-activated windows and everything was fine. Until the last moment, I rebooted after activating it. I have the problem that I have seen posted in a bit. When Windows has finished initializing all the desktop icons and task bar etc. disappear. Nothing works.
I can bring up the Task Manager and manually run programs, etc.
Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.
I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar. I also ran several controls of virus, including one for the virus, which is usually the cause of this problem. (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions. Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back. Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something. In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem. BUT I think it will break my record.
I'm doing this as a favor for a friend. But at this point our friendship is really put to the test
Hello
This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.
-
The Windows XP Explorer crash when checking the USB SD OEM-builtin card reader properties
Hello, people.
It's my only known PC malfunction, and initially, it worked without problem. The question began at a time not very long before a recent update failure. The problem is related to the card reader SD OEM-builtin of the Pavilion. Windows XP is unable to connect to this player when my 4 GB SDHC card is slipped into the SD card reader, an error box quote as 'due to an error IO peripheral." and somehow this blocks / crashes Windows explore (IE no.not) with the 4 GB card in drive F:-SD reader. But Windows and the reader work very well when my 32 MB SDHC card reading. Both the 4 GB and 32 MB cards work fine in my Canon Power Shot and I can download the contents of the card of 4 GB (JPEG format) via a mini-USB cable for the camera as always, but burning the battery juice in the batteries in the camera. I'd rather take the camera SDHC card and empty its JPEG files in the SD drive. I don't think that it is able, barely used player until three or four months ago. I'll also post this question to the Canon forum and maybe HP forum, but I would like to have some ideas as well on the side of Windows.
It occurs to me, I don't know how many contacts on the card is active in dealing with the 32 MB. I expect that the 4 GB card should use almost all of the pins; I was wondering if a unused pin in size of 32 MB can be failed do contact and this could corrupt the ease of use of the 4 GB card.
FYI - my system is HP Pavilion a1020n, five years old. It includes the processor Intel P4 CPU, has 130 GB free on the system partition, and has been upgraded from two years to 2 GB RAM DDR2 PC2 - 4200. OS is Win XP Professional x 86 SP3 with .net all Frameworks 1.1, 2.0, 3.0, 3.5, 4 customer and extended 4, IE 8.00.6001.18702, most Silverlight 4.0.50917.0 to patched. All the .NET Frameworks are patched, except that the last .NET two patches for the version 2.0 and 3.5, KB2418241 and KB2416473, both failed several trying to install, and I'm looking for help with that in a posted question, but if you think of these malf are linked, please let me know.
Any suggestions on Win Explorer and the card 4 GB SDHC, anybody?
It's my only known PC malfunction...
Given your other two sons, which does not seem to be the case:
CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e4db953-8811-438c-bffe-0ca401729b57
CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/79b90924-e2b3-4bff-b854-596632cdcef6
Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):
1. when (date approximately) installed WinXP SP3?
2. what application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
3A give Norton or McAfee application already installed on this machine?
4. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
5. have you already had the opportunity to do a Repair Installation or a clean installation of Windows XP for some reason any?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.
This happened to someone else? Is it I can do it fix it?
Hello
Since you get such a serious mistake, I would use the free incident reports.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows fax and scan only saves the first page
When I use the windows fax and scan pages to analyze. You can get an overview of all the multiple pages scanned, but what emailing or save you then cannot see the first page.
Hello
If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:
Scan a document or photo with Windows Fax and Scan
http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scanIf you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.
Reference:
Scanning: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questionsKind regards
Afzal Taher
Microsoft technical support engineer
Maybe you are looking for
-
How can I open a blank screen between 2 filled with screens
Need to transfer some applications to an adjacent empty screen. How to create this white screen?
-
HP Pavilion dv7 to Dish network Service connection
I recently bought a HP Clubhouse dv7 with a built in TV tuner. I have cable through DISH network TV and I m struggling to get my laptop connected to my cable DISH service. I tried the antena analog TV came with the laptop and I m able to receive free
-
I get an error code for a website I always
What does "in the Application Server error ' / '? He said also under: padding is invalid and cannot be deleted.
-
Login script JSON jqm to need help bbui
Hello A few months ago, I tried to start with bbui get more native objects (like swipe in the menu drop-down). The problem is that bbui sucks compared to jqm (kitchensink) my complete app depends on, and the part I am now is connection and registrati
-
Can headless part of the application calls a function QML?
Normally, when you write code in c ++ in the part of the user interface of the code, I am able to call the function of any file QML by writing the code below. QmlDocument *qmldoc = QmlDocument::create("asset:///Functions.qml"); AbstractPane *root = q