The 2012 VBAI Migrateing move KING in LabVIEW

Similar Questions

• Problems with migration from LabVIEW 2012 VBAI 2012.

  Hello.

  Someone had problems with the migration of the VBAI 2012, 2012 to labview?
  I'm filing this disadvantage when use migration in VBAI everything works fine, when I use LabVIEW with 'Vision Acquisition Express' for example, everything works as it should.
   
  The solution I've done has been to work with the control VBAI API and it worked perfectly, but I wonder, if a bug or a known error on this process.

  Thank you.

  Finally, I solved it by installing the "Vision Development Module 2012 SP1". With this update worked correctly migration.

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• [LabVIEW 2013] Update Service NOR recommend to install the update for the 2012 LabVIEW runtime engine

  Update service NOR recommend to install the patch f5 for the 2012 LabVIEW runtime engine. However, I have LabVIEW 2013 currently running on this computer and never had installed LabVIEW 2012.

  Is this expected behavior and it is actually recommended to install this update?

  Hi mest,.

  Details of the full patch for f5 patch are available in this knowledge base article. As a general statement, we encourage everyone to install the patches as soon as they are available through the Update Service, especially if they are marked as Urgent (it is not marked urgent). In this particular case, it is unlikely that you'll turn to all the problems solved by the f5 2012 SP1 hotfix since you use LabVIEW 2013.

  The reason why you see the update in the update service is LabVIEW 2013 installs several versions of the runtime LabVIEW, so Update Service sees that you have on 2012 Run-Time Engine installed and invites you to patch.

  Kind regards

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments

• VBAI migration to labview

  Hey guys,.

  I get an error when I run my application the error I get is error-1074396120 was held at IMAQ Image read, it says IMAQ vision is not an image. It works very well in VBAI I have a snapshot of the image, but it gives error in labview, suggestions. Thank you

  Damien

  Found that error had the unit running in another application.

• How do I auto detects the target using the trigger VBAI mode

  Hello world

  I had a vision system of machine ready to take choose using VBAI 2013 sp1.  Also, I use a sensor switch to trigger the camera to take pictures.

  When I type the loop running, it just won't continue to take photos no matther switch sensor triggers the camera or not.  I think it's the step that I used for the recording of the image, in the stage of registration of the image, I used picture newspaper still, but I don't want to use which is only what inspection status allows no other choice.

  So, how can I let the unit wait until he got the trigger of the alarm switch signal, and then take a picture and save the image?

  the stage of inspection to acquire the image, I used the trigger mode and everything worked fine, except the time error settting upward, I used 5000ms and if I put bigger like the 50000ms, VBAI turned really slow and showed time out error.

  If anyone can help me on this matter?

  Thank you

  You can use the diagram States-transitions to go only in a State based on the result produced by some steps.

  First, remove the registration step of the image of the State to check with you get the image

  Press Ctrl + E to turn the main view on the state diagram.

  Right click and create a new State.

  Right click on the State to inspect and create a new transition to this new State.

  Double click on the transition to edit it.

  Choose to acquire the Image - waiting time and set the condition false, to spend in this state when there is no timeout.

  Move the default transition from that State to the final State.

  Click on the new State to select it, and then add the image registration step.

  Using a state diagram, you have programmed an inspection that will record the image when there is no timeout.

  The State-transition diagram is a powerful tool to add a logic, branching and looping of your inspection.

  Open the tutorial 5 - state diagram Branching.vbai and tutorial 6 - State chart Looping.vbai for examples on how to use it.

  I hope this helps.

  Christophe

• How to get the exact time of microsoft access in LabVIEW?

  Microsoft access stores date/time in the precision up to a second.

  It stores not milliseconds.

  So, when I get back access time and convert LabVIEW timestamp,

  The variant ' 2012-04-16 14:45:01 "(without millisecond) comes from the access database becomes 2012-04-16 14:45:00.999 in LabVIEW timestamp.". "

  I do not know how to ajouter.000 to the retrieved Variant.

  How can I prevent LabVIEW by subtracting 1 millisecond of the access date/time variant while converting LabVIEW timestamp?

  Double Post

  Please do not create a new message with the same question.  Especially when you are already supported in the other thread.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The easier way to move the hierarchies of the same Version?

  Hi guys,.

  I have developed two new hierarchies of DRM, but kept isolated to their own Versions for testing purposes.

  I need now to move them to the Production, but to move them to the same Version as all my other hierarchies.  Is there an easy way to do this?

  I guess I'll migrate both Versions in Production, then move each hierarchy to the CurrentWorkingVersion.  I just need to know how to move between different Versions?

  Thank you!

  It's going to be a checkbox "Create new hierarchies" in one of the tabs in the Blender, make sure it is checked.

  Thank you

  Denzz

• CF9 upgrade to CF11 w/IIS is unable to get to the stage of migration/configuration

  I'll finally approval to my update not as a stand alone, side-by-side upgrade which was make me do a significant Gash was not working because of our funky twists coding and security, we have implemented in the code.

  Unfortunately, when I do the upgrade and installation it installs, but I can't move to the phase of migration/configuration of the facility.  I see nothing in the error logs.  Sometimes I get the message of 500.19 error when I try to connect to the administrator myself, other times nothing.  When I get the error HTTP 500.19-Internal Server Error it designates the file ApplicationHost.config or web.config that contains the malformed xml element.  When I look at the web.config file it contains about 9 event handlers use jrun_iis6_wildcard.dll or jrun_iis6.dll.  I do not have the IIS6, IIS7 configuration selected in the new installation of CF11, but I can't go forward.  I want to just copy these 2 files to my installation of CF9, but I don't know where to put them.  I even renamed the web.config file so that IIS would recreate it so he wouldn't refer to the Web.config CF9 old and stuck there, what a time error message referred to in these lines in the file web.config CF9.  I understand that this issue blurs the borders of category of ColdFusion/IIS.  I don't know where my error lies with IIS or CF11.  I want to just manually enter these managers in IIS 7, but my boss seems to think that we must have wsconfig do that for us in case it puts code somewhere else and we lose configuration changes that really puts us in a spiral.  Any ideas/suggestions?  I hope that I was clear enough.

  Another thing is that we have our CFIDE to CF9 file located in a directory other than for security reasons I suppose, but I can't understand how CF is aware that he must go to run.  In the CF administrator, it refers to another for CFIDE folder that does not exist.  I saw a reference to the correct location, and it is in the registry while I was sure CF11 references have been removed. CF9 he had there. I guess I wonder if there is a setting somewhere that I need to change if CF11 will look in the right place and then run and go ahead with the part of the migration/configuration of the instalation.  I can't find it in any of my research looking for the foldername in the files.

  I inherited this project and there is very little documented regarding configuration changes that have been made.

  Thanks in advance!

  Jennifer

  OK, my installation works, although I always try to get the apps to work (I think that the problems of permissions).  Since I continued to have problems of migration we created a CAR first with CF9.  We were then just do an upgrade directly on our development server.  I performed the installation with the server configuration and selected configure my server Web ColdFusion 11, IIS. When you launch the browser to connect to CF11 administrator if you get 500 error may be because the SSL for the CFIDE > folder in IIS administrator is selected.  Deselect it and this error messge should disappear (if it is).  We continue receiving a message from 404.7 error refuse to file extension.  I thought it had to do with my cfm extensions because I was trying to open a cfm, but it wasn't the case.  The error mentioned isapi.redirect.dlls.  I finally found an error message under my FailedRequestLogs IIS that mentioned something about request filtering.  It turns out that .dll is not in his list of my virtual folder from Jakarta.  Once I added this and restarted IIS, I could enter my CF Administrator 11 and installed the file of the CAR.

  Now I'm getting unauthorized errors and need to understand this. The permissions are similar to the cause of this.

  Things I learned (you know already that):

  • CF9 may have placed everywhere CFIDE, but CF11 must keep where it is installed.
  • Cf11 didn't need metabase IIS 6 installed, unlike CF9 compatibility (at least we did)
  • We continue get a MIME Type error message also overlap for .air.  Which has been added to the server level and inherited at the Web site level.  I deleted at the server level and he added to the Web site level.

  I hope this helps someone.

• Apex 4.0 to 4.1 on the new server migration translated application problem

  Hello
  
  I have a translated application works well on an apex 4.0 Server and want to upgrade to 4.1 using a new server.
  
  I did what I do normally, export schema and application, and then import the schema and the applications on the new server.
  
  This does not work for the main application, but it does not work for the translated application.
  
  If I run the application right after having established import, changes to the login pages between two languages that I use, but when you try to connect with the second language, it gives me the following error (112 is the main language and 113 is the translated application)

  Error     Error processing authentication.
            ORA-06550: line 2, column 37: PLS-00103: Encountered the symbol ".113" when expecting one of the following: ( ; is with authid as cluster order using external deterministic parallel_enable pipelined The symbol ".113" was ignored.

  If I have "seeds" and then "publish" the application in the menu of globalisation so the second language does not work at all (it continues to display the main language in the selection of the translated application).
  
  I went through a lot of threads and it seems to a problem with the translated applications.
  
  Is there a valid way to make the translated application work for this migration?
  
  Teo

  Hello Teo,

  export your 4.0 system XLIFF file development. Also, make sure you import your application with the same application id in the 4.1, otherwise all the internal IDS will move.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• 30EA2 - No. databases available at the stage of Capture with the MS Access Migration

  I am trying to import an Access 2007 database by using the Migration Wizard. But when I get to step 5 (Capture), no database is listed in the section 'Available databases'. I have created a connection to the Access db and can see objects in ot of SQL Developer.
  
  What Miss me?
  
  Can I use the SQL Developer Microsoft Access exporter to create the desired files. But I do not know how to integrate this into the process.
  
  It seems the only available migration technique is to click on the MS Access connection and then click on "copy to Oracle.
  
  I use SQL Developer 3.0.02 and MS Access 2007 (although I tried with MS Access 2000 as well).
  
  Published by: KenDoesntKnowItAll on 20 December 2010 13:36

  Hi Ken,

  Cradle of the last sheet code developing sea jan 12 - in my view, there is little or no substantive changes required for the release of the adopter later than at the beginning.

  1/create and populate/associate one repository: connection (with sqldeveloper specific tables)
  Create the connection to the new schema
  Right-click on the connection-> rtepository-> associated migration reposiory Migration
  2/create a login for the online move data
  3/create a destination oracle schema
  4/kickoff of the exporter:
  Tools-> migration-> Microsoft Access exporter-> (choose the version)
  The Microsoft Access exporter you choose Exit to SQLDeveloper (which is
  -a xml for the metadata file and
  -possibly move the dat files for the data in the table offline)
  and you can choose the microsoft access file
  -the access file you need to modify the access file to allow access to the metadata needed to create the xml file: see before the migration of Microsoft Access Help.
  5 / the kickoff of the wizard
  Tools-> Migration-> migration->
  in the wizard
  Then-> choose repository-> then connection-> the name of the type on the top and a new directory (or a directory previously used for this purpose) on the bottom, it's a base directory for example creation generated script output and possibly given offlline move scripts-> next-> offline, choose your xml file created by the Microsoft Access exporter (it must filter down xml files to make visible the xml files (, the file selector)-> then-> (note contains selected databases ) next-> then->
  Choose the destination oracle schema
  [I guess it comes to your own instance of XE small scratch - otherwise, you'll need to make sure that you grant privileges to this scheme, in my case that a schema has been created, called ]
  [suggest drop oracle targets option if you've run through it before]
  -> datamove online, choose source (access) and the destination schema (oracle)
  [suggest data truncated if you have lived this before]
  -next-> finish

  This kicks off you could get errors in the cmd window you launched it in by
  CD sqldeveloper\sqldeveloper\bin
  . \sqldeveloper
  or in the logging pane.
  There is a .sql file generated (a subdirectory off) the output base directory.

  (1) SQL Developer 3, I don't see the possibilities to specify one file, xml or otherwise, during the migration Assistant before step 5. Can you be more specific on where you're talking about choosing a file?

  ("To pick up in access file is an .xml file of the exporter instead of a .ocp file (you must change the file type in the file dialog box) (the main file seems to default to the .xml)" ")

  You can choose the option offline (as indicated in the instructions above), which will then choose a file (by default .ocp but a .xml filter files is also available)

  -Turloch
  Team SQLDeveloper

• What is the difference between the formats .m4v and .mov?

  I recorded a video of 18 seconds on my iPhone 6 p and sync Photos on my mac (El Capitan).

  When I try to export this video of Photos on my hard drive, Photos gives me options for

  • Export 1 video...
    • Selection 4K output gives me a 24.3 MB file with a .m4v
  • The Original unmodified for 1 video export...
    • Gives me a 39 MB file with a. MOV extension

  I want to store this file on a disk hard in case I want to change it in the future. What storage option gives me the most flexibility and the best resolution? MOV file is larger, but 4K does not give you the best picture? The only video editor that I use is on iOS and mac iMovie.

  (18 "video is just an example. What I'm really dealing is a 15-minute video which is > 800 MB.)

  Thanks for any help you can provide!

  MJ - lee

  Hi, mjlee,

  For your application, I would only export the unmodified Original.  File more voluminous, but of better quality and more flexibility to edit later.

  Yes, 4K gives a beautiful image.  But if you go in the m4v form you'd be compressing considerably and thus loss of quality.  Then, when you change it and new made, you could be compressing more.   Whenever you visit, you lose the quality.  In addition, edition would be not as accurate due to compression Group of Pictures.  So, if you can get an unmodified original .mov, I would take this option.  Your unmodified original is going to be a 4K movie much less compressed you can change and go to as high a quality as your application is capable of.

  Best,

  Rich

• all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

  I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

  Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

  If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
  http://www.eightforums.com/

• What is the best practice to move an image from one library to another library

  What is the best practice to move an image from a photo library to another library of Photos ?

  Right now, I just export an image on the desktop, then remove the image from Photos. Then, I open the other library and import these images from the office in Photos.

  Is there a better way?

  Yes -PowerPhotos is a better way to move images

  LN